A:
Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps.
Q1. Can the PoE injector supply power to a PoE device which
doesn’t have a gigabit PoE port?
A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE
function.
A2: Ensure the power consumption of the PD doesn’t exceed the maximum
power supply of the PoE injector, otherwise the overload protection of the
PoE injector will be activated. The quality and length of the Ethernet cable
Q2. What can I do if my PoE injector doesn’t supply power to
the powered device or the supplied power is unstable?
FAQ
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email techwriter@tp-link.com.cn.
To ask questions, nd answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
Safety Information
Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
The plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be easily accessible.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper
use of the device. Please use this product with care and operate at your own
risk.
Operating Temperature TL-POE160S: 0 C to 40 C (32 F to 104 F)
TL-POE170S: 0 C to 45 C (32 F to 113 F)
Storage Temperature
Storage Humidity 5% to 90% RH non-condensing
Operating Humidity 10% to 90% RH non-condensing
Environmental and Physical Specications
Ports
Standards
TL-POE160S: PWR
TL-POE170S: PWR, PoE
UTP/STP of Cat. 5 or above (based on the standards
that the connected devices comply with)
LED
Cable Type
General Specications
10/100/1000 Mbps RJ45 DATA IN Port
10/100/1000 Mbps RJ45 PWR+DATA OUT Port
AC 100–240 V 50/60 Hz Power Input Port
Dimensions
(L×W×H) TL-POE170S: 154.7×70×42 mm
Wall
Mountable Yes
TL-POE160S: 30 W
TL-POE170S: 60 W
Maximum
Power Supply
TL-POE170S: 102 mm
Distance Between
Mounting Holes
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations
2016.
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca
Keep the device away from water, re, humidity or hot environments.
