TP-Link Archer C7 Setup guide

How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK
http://www.tp-link.com/en/article/?faqid=703[16/11/2014 4:50:41 PM]
This article doesn't apply to TL-WR1043ND V1 and Archer C7 V1.
Note:
Please prepare the Username and Password from Maxis for your internet service first.If you are not sure,please
contact Maxis to get the information.
Step 1
Connect your computer to the LAN 2 or 3 port of the TP-LINK router. Connect the Maxis modem to the WAN
port of the TP-LINK router.
Step 2
Open the web browser and in the address bar type in http://tplinklogin.net. And then press Enter.
Step 3 Type the username and password in the login page. The default username and password both are admin.
Step 4
Click Quick Setup and click Next.Then Working Mode choose Maxis Mode and click Next.
[FAQ ID: 703]
How to setup TP-LINK router with Maxis Fibre modem?
Archer C7, TL-WDR3600, TL-WDR4300, TL-WR1043ND, TL-WR841HP
Suitable for:

How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK
http://www.tp-link.com/en/article/?faqid=703[16/11/2014 4:50:41 PM]
Step 5 This page is for setting up the VLAN of the IPTV and VOIP,don’t change anything and click Next.
Note:
Make sure IPTV VLAN ID is 823, if it’s 822 please change it to 823.
Step 6
Put in the Username and Password from Maxis,click Next.
Step 7
You can create your own Wireless Network Name and Password on this page,Region please choose
Malaysia
,click Next.(For dual-band routers,you will be required to set up the wireless for 2.4GHz and 5GHz).

How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK
http://www.tp-link.com/en/article/?faqid=703[16/11/2014 4:50:41 PM]
Step 8
Click Reboot.Wait for the router to reboot itself ,at the meantime,please power cycle the Maxis modem.
Step 9
After the modem and router are rebooted,please go to Status page,check WAN
section,if the IP Address
shows 0.0.0.0,please double check your Username and Password from Maxis and do the
Quick Setup again.If it
shows other numbers,that means the router is configured successfully.

How to setup TP-LINK router with Maxis Fibre modem? - Welcome to TP-LINK
http://www.tp-link.com/en/article/?faqid=703[16/11/2014 4:50:41 PM]
Step 10 Connect your TV to LAN 1 and VOIP phone to LAN 4,try the services.
Print E-mail Close Top Back to FAQ Views: 399
Download Privacy & Terms of Use Contact Us Copyright © 2014 TP-LINK Technologies Co., Ltd. All rights reserved.