TP-Link HS220 User manual

User Guide
Kasa Smart Wi-Fi Light Switch, Dimmer
© 2024 TP-Link 1910013626 REV4.0.0

Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Set Up Your Smart Light Switch ····················· 4
Main Device Controls··········································· 6
Manage Device Settings ···································· 9
Reset Your Smart Light Switch······················13
Authentication ·······················································15

1
About This Guide
This guide provides a brief introduction to Kasa Smart Wi-Fi Light Switch, Dimmer and the Kasa Smart app, as well as regulatory information.
Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Kasa Smart experience.
Conventions
In this guide, the following convention is used:
Convention Description
Teal Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
• Specications can be found on the product page at https://www.tp-link.com.
• Our Technical Support contact information can be found at the Help center of the Kasa Smart app and the Contact Technical Support page
at https://www.tp-link.com/support.

2
Introduction
Control your home lighting from anywhere, anytime with the Kasa Smart app. Easily dim your lights from 1% to 100%.
• Smart Dimming - Adjust your home's brightness freely using the Kasa Smart app, built-in dimmer buttons, and voice commands via Alexa or Google
Assistant. With the Fade On/O feature, smoothly adjust lighting levels without sudden eye-irritating brightness or darkness.
• Brightness Control - Control the brightness of your lights to set the perfect ambiance for any activity.
• Voice Control - Use simple voice commands to control the lights with Alexa or Google Assistant.
• Remote Control - Control anything connected to your smart light switch, like lights, ceiling fans or other xtures, from anywhere using the Kasa
Smart app.
• Set Schedules - Set your dimmer to automatically turn on and o while you’re home or away.
• UL Certied - Housed with V-0 (UL94) ame-retardant material, the smart light switch is UL listed for safety use.
• Away Mode - Set your smart light switch to turn connected xtures on and o at random intervals to give the appearance you're home even while
you're away.
• Delayed Shuto - Set your lights to remain on for a predetermined period of time after they are turned o so that you have time to exit the room.
• Group & Scene - Group your smart switch with other smart devices to control them all at once. Set custom scenes to match any occasion like
waking up.
• No Hub Required - Connect to your existing Wi-Fi router.

3
Appearance
The dimmer switch is compatible with incandescent, LED, Halogen, and compact uorescent light bulbs. The following picture uses the white color
switch as an example. See the explanation below:
RESTART
RESET
Solid Amber: Starting up.
Blinking amber & green: Ready for setup; Resetting Wi-Fi.
Blinking Green: Connecting to Wi-Fi.
Solid Green: Lit up for about 30 seconds when successfully
connected to the Wi-Fi network, then turns o.
Blinking Amber: Resetting.
Solid Red: No Wi-Fi connection.
White: Lit up when the light is switched OFF to show the Smart
Switch location in the dark.
Press to reboot the Smart Switch.
Press & hold for about 5s: Reset Wi-Fi while keeping other settings
Press & hold for about 10s: Restore factory default settings.
Press to decrease/increase light brightness.
Light Indicators: Indicate light brightness.
Switch Button: Press to turn on/o the switch.

4
Set Up Your Smart Light Switch
Follow the steps below to set up your Smart Light Switch via Kasa Smart app.
1. Download and install Kasa app
Go to Google Play or the App Store or scan the QR code
below to download the Kasa Smart app on your Android or iOS
smartphone or tablet.
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Create Account and the Kasa
Smart app will guide you through the rest.

5
3. Add Device
Tap the + button in the Kasa Smart app,
• If your device is white, select Smart Switches > Smart Switch (Wi-Fi).
• If your device is almond, select Smart Switches > Smart Switch (BLE).
Then follow app instructions to complete setup.

6
Main Device Controls
After you successfully set up your Smart Light Switch, you will see the home page of the Kasa Smart app. Here you can view and manage all devices
that you've added to Kasa. Tap your smart switch to control and manage it.
Home Page
Turn on/o your device on the Home page.
Status Page
Turn on/o your device, change light brightness, or set schedules,
timer, Away Mode or check runtime on the Status page.

7
Set Schedules
Set schedules to automatically turn on/o the light at set times
according to your daily routine.
Set a Timer
Set the timer for your dimmer switch to automatically turn on/o
after the time ends.

8
Set Away Mode
Set Away Mode for your dimmer switch to turn on/o the light
automatically at random intervals while you are away to make the
appearance that someone is at home.
Check Runtime
Check runtime to keep track of how long your dimmer switch has
been working.
.

9
Manage Device Settings
1. Tap on the Status Page to enter the Device Settings page.

10
1. Edit device name and icon
You can edit the device name and icon of your dimmer switch.
2. Set brightness presets
Set preset brightness levels so you can switch to the desired
brightness with just one tap. The presets will appear on the Status
page of the light.
.

11
3. Set default state
Set the state you want your device to turn to under dierent
occasions.
4. Set fade on/o
Set the fade on/o time for the light to reduce the strain on your
eyes.
.

12
5. Control your device LED.
Set the LED status.
6. Check Groups that your Smart Switch is in.
Check whether your device is added to a group with other devices
for simultaneous control.
.

13
Reset Your Smart Switch
You can remove your device from the Kasa Smart app on the Home page or on the Device Settings page, or
by pressing the Reset button on your Smart Switch.
Home Page
Long press the fan or the light and then tap . Double conrm it.
Device Status Page
Tap Remove Device. Double conrm it.

14
Press the Reset button
Press and hold the Reset for at least 10 seconds to restore factory default settings.

15
Authentication
FCC compliance information statement
Product Name: Kasa Smart Wi-Fi Light Switch, Dimmer
Model Number: HS220
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: [phone]
Fax: [phone]
E-mail: [email protected]om
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

16
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards,
FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024.01.20

17
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
NCC Notice
注意！
依據 低功率電波輻射性電機管理辦法
LP0002低功率射頻器材技術規範_章節3.8.2
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。

18
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
BSMI Notice
安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
• 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。
限用物質含有情況標示聲明書
設備名稱：
Equipment name
Kasa Smart Wi-Fi Light Switch, Dimmer
型號（型式）：
Type designation (Type)
HS220
單元
Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr+6)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
PCB○○○○○○
外殼○○○○○○
電源供應板 — ○ ○ ○ ○ ○
其他及其配件 − ○ ○ ○ ○ ○