TP-Link JetStream T1500G-8T Installation instructions manual

Wall Mounting Guide
Wall Mountable Switches
© 2023 TP-Link 1910013579 REV1.0.0

1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
ǴA screw driver.
ǴTwo screws which complies to the corresponding standard. For details, see Wall
Mounting Specification.
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws
into the wall, then mount the switch on the wall. Note that the switch should be mounted
on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/
TL-SG1008P, the switch should be mounted with the ports facing downward and the
LEDs facing upward.
1) Determine the location on the wall where you want to mount the switch.
2) Mark the wall where the two mounting holes are. The distance between the two marks
must be the same as that between the two mounting holes of the switch. For the wall-
mounting-holes distance, see Wall Mounting Specification.
3) Drive the screws into the wall at the marks using the screw driver. For the Screw-
Head-to-Wall Minimum Distance, see Wall Mounting Specification.
4) Mount the switch on the wall.
1.3 Wall Mounting Specification
Model
Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
DS105G 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
DS105GE 4#, (5#), 6# 7.5mm 1.5mm 52mm
DS105G-M2 4#, (5#), 6# 7.5mm 1.5mm 52mm
DS105GP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
DS105X 4#, (5#), 6# 7.5mm 1.5mm 150mm
DS106GPP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
DS106P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
DS108G 4#, (5#), 6#, 8# 7.5mm 1.5mm 94mm
DS108GE 4#, (5#), 6# 7.5mm 1.5mm 110mm
DS108G-M2 4#, (5#), 6# 7.5mm 1.5mm 110mm
DS108GP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
DS110GMP 4#, (5#), 6# 8.5mm 1.5mm 150mm

Model Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
D S111P 4#, (5#), 6# 8.5mm 1.5mm 150mm
D S116 G E 4#, (5#), 6# 8.5mm 1.5mm 200mm
ES205G 4#, (5#), 6# 11m m 4.5mm 52mm
ES205GP 4# 10mm 4.5mm 39mm
ES210GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
LS10 05G 4#, (5#), 6# 8.5mm 2.5mm 38mm
LS10 08G 4#, (5#), 6# 8.5mm 2.5mm 48mm
LS105G 4#, (5#), 6# 7.5mm 1.5mm 76mm
LS105GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS105LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
LS106LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
LS10 8G 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS10 8GP 4#, (5#), 6# 7.5mm 1.5mm 65mm
LS10 9P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
LS1210 GP 4#, (5#), 6# 7.5mm 1.5mm 150mm
S4500-16GP 4#, (5#), 6# 8.5mm 1.5mm 200mm
S4500-8G 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP 4#, (5#), 6# 8.5mm 1.5mm 150mm
S4500-8GP2F 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2008P 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2016P 4#, (5#), 6# 8.5mm 1.5mm 200mm
SG2210P 4#, (5#), 6# 8.5mm 1.5mm 150mm
SG2210XMP-M2 4#, (5#), 6# 8.5mm 1.5mm 150mm
T1500G-8T 4#, (5#), 6# 8.5mm 1.5mm 150mm
TL-RP108GE 4#, (5#), 6# 8.5mm 1.5mm 65mm
TL-SF1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SF1006P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SF1008LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SF1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm

Model Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
TL-SF1009P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SF1016D 4#, (5#), 6# 9mm 3mm 157.2mm
TL-SG1005D 4# 10mm 4.5mm 60mm
TL-SG1005LP 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SG1005P 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SG1005P-PD 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG1006PP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG1008D 4# 10mm 4mm 100mm
TL-SG1008P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
TL-SG105 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
TL-SG105E 4#, (5#), 6# 7.5mm 1.5mm 52mm
TL-SG105-M2 4#, (5#), 6# 7.5mm 1.5mm 150mm
TL-SG105MPE 4#, (5#), 6#, 8# 8.5mm 1.5mm 39mm
TL-SG105PE 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
TL-SG105PP-M2 4#, (5#), 6# 7.5mm 1.5mm 150mm
TL-SG105S 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
TL-SG105S-M2 4#, (5#), 6# 7.5mm 1.5mm 52mm
TL-SG108 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG108E 4#, (5#), 6# 7.5mm 1.5mm 110mm
TL-SG108-M2 4#, (5#), 6# 7.5mm 1.5mm 150mm
TL-SG108PE 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG108S 4#, (5#), 6#, 8# 7.5mm 1.5mm 94mm
TL-SG108S-M2 4#, (5#), 6# 7.5mm 1.5mm 110mm
TL-SG116 4#, (5#), 6# 8.5mm 1.5mm 200mm
TL-SG116E 4#, (5#), 6# 8.5mm 1.5mm 200mm
TL-SG116P 4#, (5#), 6# 8.5mm 1.5mm 200mm
TL-SG1210MP 4#, (5#), 6# 8.5mm 1.5mm 150mm
TL-SG1210MPE 4#, (5#), 6# 8.5mm 1.5mm 150mm
TL-SG1210P 4#, (5#), 6# 7.5mm 1.5mm 150mm
TL-SG1210PP 4#, (5#), 6# 7.5mm 1.5mm 150mm
TL-SG2008 4#, (5#), 6# 8.5mm 1.5mm 150mm

Model Screw Standard of
ANSI B1.1
Minimum Length
of Screw
Screw-Head-to-Wall
Minimum Distance
Wall-Mounting-Holes
Distance
TL-SG2008P 4#，，5#，，6# 8.5mm 1.5mm 150mm
TL- SG2016P 4#，，5#，，6# 8.5mm 1.5mm 200mm
TL-SG2210P 4#，，5#，，6# 8.5mm 1.5mm 15 0mm
TL-SG605 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
TL-SG605E 4#, (5#), 6# 7.5mm 1.5mm 52mm
TL-SG605P 4#, (5#), 6#, 8# 7.5mm 1.5mm 39mm
TL-SG608 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm
TL-SG608E 4#, (5#), 6# 7.5mm 1.5mm 110m m
TL-SG608P 4#, (5#), 6#, 8# 8.5mm 1.5mm 105mm
T L- S L13 11MP 4#, (5#), 6# 8.5mm 1.5mm 150 mm
T L- S L13 11P 4#, (5#), 6# 8.5mm 1.5mm 15 0 mm
TL-SX105 4#, (5#), 6# 7.5mm 1.5mm 150mm