Tp-link Deco m6 User manual

Paint Your

Home in Wi-Fi™

User Guide

AC2200 Smart Whole-Home Wi-Fi System

Deco M6

1910012164 REV1.0.0

Contents

About This Guide ···················································· 1

Set Up Your Deco ··················································· 2

Dashboard·································································· 4

Wi-Fi Settings···························································· 5

Parental Controls ···················································· 6

Antivirus ······································································· 7

QoS················································································· 8

Advanced Features ··············································· 9

Online Upgrade······················································10

Managers··································································11

Authentication························································12

About This Guide

This guide provides a brief introduction to Deco Smart Whole-Home Wi-Fi System and the Deco app, as well as regulatory information.

Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet

service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.

Conventions

In this guide, the following conventions are used:

Convention Description

Deco Stands for Deco Smart Whole-Home Wi-Fi System/Unit.

Underline Hyperlinks are in teal and underlined. You can click to

redirect to a website or a specic section.

Teal Key information appears in teal, including management

page text such as menus, items, buttons and so on.

Note: Ignoring this type of note might result in a malfunction

or damage to the device.

Tips: Indicates important information that helps you make

better use of your device.

More Info

• Specific product information can be found on the product page at

http://www.tp-link.com.

•A Technical Support Forum is provided for you to discuss our

products at http://forum.tp-link.com.

•Our Technical Support contact information can be found at the Help

center of the Deco app and the Contact Technical Support page at

http://www.tp-link.com/support.

Set Up Y

our Deco

Follow the steps below to set up your Deco Whole-Home Wi-Fi system.

1. Download and install the Deco app

Scan the QR code below or go to Google Play

or the Apple App Store to download the Deco

app.

Install the app on your Android or iOS

smartphone or tablet.

2. Log in or sign up with TP-Link ID

Open the app. Use your TP-Link ID to log in.

If you don’t have a TP-Link ID, tap Sign Up. The

Deco app will guide you through the rest.

3. Connect your modem to Deco

Find and power o your modem. Connect your

Deco to the modem and power them both on.

If you don't have a modem, connect the

Ethernet outlet directly to your Deco.

Set Up Y

our Deco

Follow the steps below to set up your Deco Whole-Home Wi-Fi system.

4. Select a location

Select a location for this Deco. If its location

is not listed, you can create a new one by

choosing Custom.

5. Create your Wi-Fi network

Set a network name and a password. These

will be the name and password you use to

connect your devices to Wi-Fi.

6. Add more Decos

You can add more Decos to expand Wi-Fi

coverage. The app will guide you through the

process of adding more Decos one by one.

Dashboard

After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the working status of all Decos, test

the internet speed, check the connected devices and manage your network.

Deco Status, Speed Test & Devices Swipe Right Tap the Main Menu

Wi-Fi Settings

Customize the network name and password of your main network or create a separate network just for guests. You can set a guest network name and

an easy-to-remember password. You can shake your device to share the network details easily with family and friends.

Enable Guest Network Create Network Name and Password Shake to Share

Parental Controls

Create proles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long

each person can access the internet. Block inappropriate content and pause the internet if necessary.

Insights Filter Level Time Controls

Antivirus

There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting the system and applications

against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information outside your network.

Protection Enabled Alert History Protection Disabled

QoS

There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a

family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as

Streaming or Gaming.

Prioritize a Device Prioritize an Activity Customize

Advanced Features

Additional features are available under the Advanced menu. Modify WAN settings (IPv4 & IPv6), control Deco's LED and turn notications o and on.

IPv4 IPv6 LED Control

Online Upgrade

TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.

Update Available Updating Deco Up-to-date

Managers

Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.

Add as Manager Manager List Remove a Manager

Authentication

Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product

names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications

could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be

co-located or operating in conjunction with any other antenna or transmitter.

“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction

with any other antenna or transmitter.”

CE Mark Warning

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take

adequate measures.

RF Exposure Information

This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way

of health protection.

The device complies with RF specifications when the device used at 20 cm from your body.

Restricted to indoor use.

Canadian Compliance Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux

deux conditions suivantes :

1. l’appareil ne doit pas produire de brouillage;

2. l’utilisateurdel’appareildoitacceptertoutbrouillageradioélectriquesubi,memesilebrouillageestsusceptibled’encompromettrelefonctionnement

Caution:

1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile

satellite systems;

Avertissement:

1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de

brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

Déclaration d’exposition aux radiations:

Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être

installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Korea Warning Statements:

당해 무선설비는 운용중 전파혼신 가능성이 있음.

NCC Notice & BSMI Notice:

注意！

依據低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法

通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。

安全諮詢及注意事項

• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。

• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。

• 注意防潮，請勿將水或其他液體潑灑到本產品上。

• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。

• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。

• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що

передбачені чинними законодавчими актами України.

Safety Information

•When product has power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to

completely shut off power is to disconnect the product or the power adapter from the power source.

•Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service,

please contact us.

•Avoid water and wet locations.

•Adapter shall be installed near the equipment and shall be easily accessible.

•Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't

hesitate to contact us.

For EU/EFTA, this product can be used in the following countries:

AT BE BG CH CY CZ DE DK

EE EL ES FI FR HR HU IE

IS IT LI LT LU LV MT NL

NO PL PT RO SE SI SK UK

Explanation of the symbols on the product label

Symbol Explanation

DC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to

European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Table of contents

Other TP-Link Wireless Router manuals