TP-Link M7350 User manual

1. Install the SIM Card and Battery
· If you cannot access the internet, refer to FAQ > Q1.
·By default, Power Saving is enabled and the Mobile Wi-Fi will turn o Wi-Fi when no wireless devices are connected to it for 10 minutes.
To resume the Wi-Fi connection, press the or MENU button.
!
2. Connect to the Internet
©2020 TP-Link 7106508956 REV6.20.0
Enjoy the internet!
d. Replace the back cover.a. Remove the back cover. b. Install your SIM card. c. Install the provided battery.
b. Connect your smart device to the Mobile Wi-Fi.
To view the SSID and password, press the MENU button to switch to the
Device Info icon, then press the Power button to enter the screen.
SSID: TP-Link_XXXX
Password: XXXXXXXX
Login Address:
http://tplinkmi.net
Device Info
Wi-Fi
Wi-Fi
TP-Link_XXXX
CHOOSE A NETWORK...
Other...
< Settings
* Images are for demonstration only.
Quick Installation Guide
Mobile Wi-Fi
Press to enter the menu screen.
Device Info
560MB
5.0M/S
Carrier Name
Screen Display
Home Screen
The screen display will automatically turn o after being idle for a while.
To turn it on again, press the or MENU button.
!
Press to turn on or o the screen display.
Menu Screen
Press to switch between icons.
Press to select an icon.
a. Power on the Mobile Wi-Fi.
Press and hold the Power button until the
welcome screen appears.
1
2
1
2
1
2
+ +
SIM card requirement:
!
+ +
Micro SIM card +
Provided Micro SIM card adapter + Provided sticker
Standard
SIM card
Nano SIM card +
Provided Nano SIM card adapter + Provided sticker
·If you have a micro
SD card, you can
insert it into the SD
card slot for storage
and media sharing.
!

FAQ (Frequently Asked Questions) Safety Information
Managing Your Mobile Wi-Fi
tpMiFi App
1. Get the tpMiFi app from App Store or Google Play, or by
scanning the QR code.
2. Connect your wireless device to the Mobile Wi-Fi.
3. Launch the tpMiFi app and enter admin to log in.
or
Web Management Page
1. Connect your wireless device to the Mobile Wi-Fi. If it is a computer,
make sure it is set to obtain an IP address automatically.
2. Launch a web browser and visit http://tplinkmi.net or
http://192.168.0.1. Enter admin to log in.
For technical support, the user guide and other information,
please visit https://www.tp-link.com/support.
Manage your Mobile Wi-Fi using any of the methods below. You can customize Wi-Fi settings, block Wi-Fi devices and more.
Charging Your Mobile Wi-Fi
Method 1
Via a Wall Outlet (Recommended)
Method 2
Via a Computer
!·When on the battery icon disappears, the Mobile Wi-Fi is fully charged.
·The power adapter is not provided by TP-Link.
5V/1A
by your mobile carrier are correct. If they are not correct, return to the
Dial-up page and create a new profile with the correct information.
A4. icon
·Enter the Menu screen, go to Data Roaming, and turn on Data Roaming.
Q2. How do I restore the Mobile Wi-Fi to its factory default settings?
A. With the Mobile Wi-Fi powered on, remove the cover, then use a pin to
press and hold the Reset button until “Power Off” appears on the screen.
Note: Restoring the device to its factory defaults will clear all your settings.
Q1. What should I do if I cannot access the internet (one of the
following messages appears on the home screen)?
A1. PIN Required
·Your SIM card is PIN protected. Visit the web management page
(http://tplinkmi.net) on your phone, enter admin to log in, then enter the
PIN provided by your mobile carrier.
A2. No SIM Card
·Power off the Mobile Wi-Fi and reinstall your SIM card.
A3. No Service
·Verify that your SIM card is an LTE, WCDMA, or GSM SIM card.
·Verify that your SIM card is in your carrier’s service area and has
sufficient credit.
·Visit the web management page (http://tplinkmi.net) on your phone,
and enter admin to log in. Go to Dial-up, tap View profile details, and
verify that the parameters (i.e. APN, username and password) provided
· Keep the device away from water, re, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device. If you need
service, please contact us.
· Do not use the device where wireless devices are not allowed.
· Do not disassemble, crush, puncture, short external contacts, or dispose of
the battery in re or water.
· Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas. Do not leave a battery subjected to extremely low air pressure
that may result in an explosion or the leakage of ammable liquid or gas.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
Please read and follow the above safety information when operating the
device. We cannot guarantee that no accidents or damage will occur due to
improper use of the device. Please use this product with care and operate at
your own risk.