TPG Netgear Nighthawk RAX80 User manual

1
Modem Setup Guide –NBN FTTP
Netgear Nighthawk RAX80
Please follow the steps below to set up your Netgear Nighthawk RAX80.
1. Ensure your NBN Connection Box is turned on.
2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into
the yellow Internet port on your Nighthawk modem.
If UNI-D1 doesn’t work, try each UNI-D port.
3. Plug in the power cable and turn your Nighthawk modem on using the Power button.

2
Modem Setup Guide –NBN FTTP
4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to any of the five LAN ports, or you can connect
devices via WiFi.
5. Go to http://192.168.1 or http://www.routerlogin.net in your browser.
6. Log in with your Netgear modem username and password.
By default, these are:
Username: admin
Password: password
7. Select Internet.
8. Select Yes to Does your Internet connection require a login?
9. Select PPPoE (PPP over Ethernet) from the Encapsulation drop-down.
10. Enter in your TPG username and password.
11. Click Apply.
Once you receive notification that your TPG NBN service is active, your Nighthawk RX80
should now be online. If you are still having issues, please call us on 1300 997 271 for
further assistance.