TPG D-Link COVR-1102 User manual

1
Modem Setup Guide –NBN FTTP
D-Link COVR-1102
Please follow the steps below to set up your D-Link COVR-1102.
1. Ensure your NBN Connection Box is turned on.
2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into
the Internet port on your D-Link modem.
If UNI-D1 doesn’t work, try each UNI-D port.
3. Plug in the power cable and turn your D-Link modem on using the Power button.

2
Modem Setup Guide –NBN FTTP
4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to the Ethernet port, or you can connect devices via
WiFi.
5. Go to http://covr.local or http://192.168.1.1 in your browser.
6. Click Go to Settings and Internet.
7. Select PPPoE from the My Internet Connection is.
8. Enter your TPG username and password.
9. Select Save.
10. Click VLAN option from Internet Settings.
11. Select Save at the end of the Wizard.
Once you receive notification that your TPG NBN service is active, your D-Link COVR-1102
should now be online. If you are still having issues, please call us on 1300 997 271 for
further assistance.