Traceable 5667 User manual

Item No. 56000-16
Model No. 5667
©2022 1065T9_M_92-5667-00 Rev. 0 09022022
WARRANTY, SERVICE, OR RECALIBRATION
Traceable®Products are ISO 9001:2018 Quality-
Certi ied by DNV and ISO/IEC 17025:2017
accredited as a Calibration Laboratory by A2LA.
4-Channel Timer Quick-Start
Guide
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

SETTING A TIMER
1. Press CH/CLOCK button until the
desired channel is solid (not ashing)
on the screen.
2. Use the H/M/S buttons to congure
timer.
Note: To clear and start over, press
CLEAR button.
STARTING A TIMER
• When starting/stopping an individual timer,
navigate to that timing channel using the CH/
CLOCK button and then press START/STOP
ALL.
•To start/stop all timers, press the START/STOP
ALL button from the clock screen.
• Timers which are counting down will lash
quickly.
•Timers which are counting up will lash slowly.
•Timers which have expired will lash rapidly.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Traceable® 4-Channel Timer INITIAL SETUP
Remove battery cover and insert batteries
Replace battery cover
Press CH/CLOCK button until clock appears on top
row of display.
Start/Stop All
button
Channel/Clock
Clear timer
setting button
Seconds button
Minutes button Hours
button
Battery
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Hold CH/CLOCK until there is an audible
beep and the time flashes
To adjust 12/24 hour clock, press and hold START/
STOP ALL button.
Use H/M/S buttons to adjust the time
Pressing Seconds button will
round to the nearest minute.
Press the CH/CLOCK button
to exit setup.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]