TrailFX DHS005B User manual

Page 1 of 4
TrailFX Drop Down Step
Part No. DHS005B / DHS006B
Fits: 2019 Chevrolet/GMC - Silverado/Sierra 1500 Crew Cab /
Double Cab
Product image
TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF
THE TAILGATE VENT COVER CAREFULLY.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
PARTS LIST:
Item Qty Part Description Tools Needed
11Step Bar Driver Side 13 MM SOCKET & WRENCH
21Step Bar Passenger Side 14 MM SOCKET & WRENCH
33Mounting Bracket Driver Side 15 MM SOCKET & WRENCH
43Mounting Bracket Passenger Side RATCHET
512 M8 Bolt TORQUE WRENCH
612 M8 Lock Washer
712 M8 Flat Washer
812 M10 Flange Bolt
912 M10 Flange Nut
ALIGN THE STEP BARS AS DESIRED AND TIGHTEN ALL M10 FASTEN-
ERS TO 30 ft. - lbs., AND THE M8 FASTENERS TO 15 ft.-lbs.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
60 min Drilling Not
Required
Cutting Not Re-
quired
Mounting Kit Images
Item 3 Item 4

Page 2 of 4
4. Grab Driver Side Bar and install to mount brackets with (6) M10 Flange
bolts and (6) Serrated Flange Nuts. Assemble loosely to be able to adjust
step bar as needed. See Figure 2. See Figure 3 for reference.
5. Repeat for passenger side.
6. Align and adjust the step bar as desired. Tighten all hardware and torque
all M8 fasteners to 15 ft.-lbs. and all M10 fasteners to 30 ft.-lbs.
1. Start at the front driver side of vehicle and grab Driver Side Mount Brack-
et. Use (2) M8 hex head bolts, (2) M8 flat washer, and (2) M8 lock wash-
er to mount bracket to rocker panel. Assemble loosely to be able to adjust
step bar as needed. See Figure 1.
2. Repeat for center and rear locations.
3. Repeat for passenger side.
INSTALLATION PROCEDURE
FIGURE 76
5
3
89
FIGURE 2
FIGURE 3 DRIVER SIDE
FRONT
Item 3 Item 3Item 3

Page 3 of 4
COMPLETE INSTALLATION

Page 4 of 4
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of pur-
chase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness for a
particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product at our option,
when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this product voids the
warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for any
incidental or consequential loss or damage.
Check out these other TrailFX Products!!
PRODUCT CARE
1.
FAQ’s
1. Mounting bracket are not getting Installed properly.
In some cases Illustration images shown in Installation manual may not be the exactly same as per actual vehicle images ,also if Driver / Passenger side
mounting brackets are very identical in the design, suggest referring Parts Identification guide to avoid fitment issue.
2. Products are thumping / rattling after installation.
Please ensure that all required mounting brackets / hardware’s are installed & tighten correctly. Suggest using white lithium / regular grease between the
metal to metal contact surfaces.
3. Missing / Excess Hardware.
Recheck hardware count as per the part list.
4. Product not installing properly.
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
Learn more about running boards on our website.