Tramontina TCP 320 Operator's manual

Charcoal Grills
SAFETY AND INSTRUCTION MANUAL
26500/011 - TCP 560L
26500/009 - TCP 450L
26500/008 - TCP 450
26500/002 - TCP 320
26500/005 - TCP 320F
26500/003 - TCP 320L

CONTENTS
1. INTRODUCTION .....................................................................................................................................................................4
2. ASSEMBLED PRODUCT DIMENSIONS ..................................................................................................................................4
2.1. TCP-320 (Ref.: 26500/002): ..........................................................................................................................................4
2.2. TCP-320L (Ref.: 26500/003): ........................................................................................................................................4
2.3. TCP-320F (Ref.: 26500/005): ........................................................................................................................................4
2.4. TCP-450 (Ref.: 26500/008): ..........................................................................................................................................5
2.5. TCP-450L (Ref.: 26500/009): ........................................................................................................................................5
2.6. TCP-560L (Ref.: 26500/011): .......................................................................................................................................5
3. CHARCOAL GRILL COMPONENTS BY MODEL......................................................................................................................6
3.1. TCP-320 MODEL (Reference nº 26500/002) .................................................................................................................6
3.1.1. Components: .......................................................................................................................................................6
3.1.2. Assembly instructions:.........................................................................................................................................6
3.2. MODEL TCP-320L (Reference nº 26500/003) ...............................................................................................................7
3.2.1. Components: .......................................................................................................................................................7
3.2.2. Assembly instructions..........................................................................................................................................7
3.3. TCP-320F MODEL (Reference nºo 26500/005) .............................................................................................................8
3.3.1. Components:........................................................................................................................................................8
3.3.2. Assembly instructions:.........................................................................................................................................8
3.4. MODEL TCP-450 (Reference nº 26500/008) .................................................................................................................9
3.4.1. Components: .......................................................................................................................................................9
3.4.2. Assembly instructions........................................................................................................................................10
3.5. TCP-450L (26500/009) ..............................................................................................................................................11
3.5.1. Components:......................................................................................................................................................11
3.5.2. Assembly instructions........................................................................................................................................11
3.6. TCP-560L MODEL (Reference nº 26500/011): ............................................................................................................13
3.6.1. Components: .....................................................................................................................................................13
3.6.2. Assembly instructions........................................................................................................................................14
4. GENERAL SAFETY INFORMATION .......................................................................................................................................16
4.1. SAFETY SYMBOLS .....................................................................................................................................................16
4.2. RECOMMENDATIONS FOR USE: DANGER..................................................................................................................16
4.3. RECOMMENDATIONS FOR USE: ATTENTION AND CAUTION ....................................................................................16
5. USEFUL GUIDELINES...........................................................................................................................................................16
5.1. STARTING TO USE A CHARCOAL GRILL ...................................................................................................................16
5.2. STEPS TO A GREAT BARBECUE..................................................................................................................................16
6. COOKING METHODS ..........................................................................................................................................................17
7. CLEANING INSTRUCTIONS ................................................................................................................................................17
8. DISCARDING ........................................................................................................................................................................17
9. WARRANTY...........................................................................................................................................................................18
3

A
E
C
B
D
1. INTRODUCTION
This safety and instruction manual must be read and followed prior to operating the
grill for the first time and whenever questions arise.
This is the manual for grill models TCP-320, TCP-320L, TCP-320F, TCP-450, TCP-
-450L e TCP-560L. Therefore, please do not take into consideration information that
mentions components that are not part of your specific grill model.
Do not discard this manual as it contains important information about the product
(installation, use, maintenance, and cleaning), as well as warnings and instructions
for safe and correct usage.
Before assembling your grill, please make sure there are no missing parts.
Non-compliance with these warnings and instructions will void the warranty, and
2.3. TCP-320F (Ref.: 26500/005):
* The dimensions below are for reference
only.
Identification Measurements (cm)
A Ø36.7
B 25.5
C 12.0
D 8.0
E 55.0
may also result in serious bodily injury or death, as well as in a fire or explosion
causing property damage.
To maintain your grill’s smooth performance and make it last longer, follow the gui-
delines in this manual.
The pictures in this manual are for illustration only. The manufacturer reserves the
right to make changes to the products when considered necessary for the purpose of
making improvements without modifying essential characteristics of operation and
safety.
These grills are recommended for outdoor use only. They must not be used indoors.
2. ASSEMBLED PRODUCT DIMENSIONS
2.1. TCP-320 (Ref.: 26500/002):
* The dimensions below are for reference only.
Identification Measurements (cm)
A Ø36.0
B 25.5
C 12.0
D 8.0
2.2. TCP-320L (Ref.: 26500/003):
* The dimensions below are for reference only.
Identification Measurements (cm)
A Ø36.7
B 25.5
C 13.5
D 8.0
E 44.0
A
A
E
C
C
B
B
D
D
4

2.6. TCP-560L (Ref.: 26500/011):
* The dimensions below are for reference
only.
Identification Measurements (cm)
A 65.5
B 104.0
C 22.4
D 52.9
E 77.4
F 64.5
2.4. TCP-450 (Ref.: 26500/008):
* The dimensions below are for reference only.
Identification Measurements (cm)
A Ø47.0
B 73.5
C 16.3
D 52.0
2.5. TCP-450L (Ref.: 26500/009):
* The dimensions below are for reference only.
Identification Measurements (cm)
A Ø47.6
B 73.5
C 16.3
D 52.0
E 97.3
A
A
E
C
C
D
D
B
B
A
E
C
F
D
B
5

3.1.2. Assembly instructions:
3. CHARCOAL GRILL COMPONENTS BY MODEL
3.1. TCP-320 MODEL (Reference nº 26500/002)
3.1.1. Components:
ITEM DESCRIPTION QUANTITY
1LARGE SILICONE SUPPORT 1
2SMALL SILICONE SUPPORT 2
3UTENSIL FOR HANDLING COOKING GRATES 1
4STAINLESS STEEL COOKING GRATE 1
5STAINLESS STEEL CHARCOAL TRAY 1
6ENAMELED STEEL BOWL 1
7PAINTED STEEL TRIPOD 1
8M6 HEADLESS SCREW SET 1
9M6 WING NUT 1
10 METALLIC WASHER 1
11 CERAMIC WASHER 2
Picture 02
STEP 1
Attach the bowl (item 6) to the tripod (item 7) using the M6 headless screw (item 8),
the metallic washer (item 10), ceramic washers (item 13), and the M6 wing nut (item
9) as shown in picture 01.
(The ceramic washer that is placed on the inside of the bowl must be between the bowl
and the metallic washer, the washer that is placed on the outside must be positioned
between the bowl and the tripod.)
STEP 2
To finish, insert the center hole of the tray (item 5) into the headless screw (item 8)
and place the cooking grate (item 4) on the edge of the bowl as shown in picture 02.
3
5
8
10
11
11
2
7
1
9
6
4
11
11
7
9
10
8
6
4
5
Picture 01
6

3.2.2. Assembly instructions
Picture 03
Picture 05
Picture 04
STEP 1
Attach the bowl (item 6) to the tripod (item 7) using the M6 headless screw (item 8), a
metallic washer (item 10), ceramic washers (item 13), and the M6 wing nut (item 9) as
shown in picture 03.
(The ceramic washer that is placed on the inside of the bowl must be between the bowl
and the metallic washer; the washer that is placed on the outside must be positioned
between the bowl and the tripod.)
STEP 2
Insert the center hole of the tray (item 5) into the headless screw (item 8) and place the
cooking grate (item 4) on the edge of the bowl as shown in picture 04.
STEP 3
Align the M5 screw (item 12), a metallic washer (item 10), and a ceramic washer
(item 11) in the lid hole (inside) and the holder’s base (item 14) on the outside of the
bowl (item 15). Then position the holder (item 13) on the base and tighten using a
cross-head screwdriver* as shown in pictures 05 and 06.
*The cross-head screwdriver does not come with the product.
3.2. MODEL TCP-320L (Reference nº 26500/003)
3.2.1. Components:
ITEM DESCRIPTION QUANTITY
1LARGE SILICONE SUPPORT 1
2SMALL SILICONE SUPPORT 2
3UTENSIL FOR HANDLING COOKING GRATES 1
4ENAMELED STEEL COOKING GRATE 1
5ENAMELED STEEL CHARCOAL TRAY 1
6ENAMELED STEEL BOWL 1
7PAINTED STEEL TRIPOD 1
8M6 HEADLESS SCREW 1
9M6 WING NUT 1
10 METALLIC WASHER 2
11 CERAMIC WASHER 3
12 M5 SCREW 1
13 BAKELITE HOLDER 1
14 HOLDER’S STAINLESS STEEL BASE 1
15 ENAMELED STEEL LID 1
13
14
15
11
11
11
8
10
10
4
3
5
6
29
7
1
12
8
6
4
5
7
13
14
15
11
10
12
9
10
11
11
Picture 06
7

3.3. TCP-320F MODEL (Reference nº 26500/005)
3.3.1. Components:
ITEM DESCRIPTION QUANTITY
1LARGE SILICONE SUPPORT 1
2SMALL SILICONE SUPPORT 2
3UTENSIL FOR HANDLING COOKING GRATES 1
4STAINLESS STEEL COOKING GRATE 1
5STAINLESS STEEL CHARCOAL TRAY 1
6ENAMELED STEEL BOWL 1
7PAINTED STEEL TRIPOD 1
8M4 SCREW 6
9M4 NUT 6
10 STAINLESS STEEL HOLDER FOR COOKING GRATE AND TRAY 3
11 M6 LARGE SCREW 1
12 METALLIC WASHER 2
13 CERAMIC WASHER 2
14 M6 WING NUT 1
15 M5 SCREW 1
16 M6 SMALL SCREW 1
17 M6 NUT 1
18 BAKELITE HANDLE 1
19 BAKELITE HOLDER WITH STAINLESS STEEL BASE 1
20 ENAMELED STEEL LID 1
21 STAINLESS STEEL SKEWER SUPPORT 1
22 STAINLESS STEEL VENT 1
3.3.2. Assembly instructions:
Picture 07
Picture 08
STEP 1
Attach the bowl (item 6) to the tripod (item 7) using the M6 large screw (item 11),
a metallic washer (item 12), ceramic washers (item 13), and the M6 wing nut (item
14) as shown in picture 07.
(The ceramic washer must be between the bowl and the metallic washer.)
STEP 2
Attach the holders (item 10) to the bowl (item 6) using M4 screws (item 8) and nuts
(item 9) as shown in picture 08.
19
18
22
20
13 21
12
15
17
16
3
4
5
10
11
12
13
6
7
2
14
1
8
9
11
12
13
6
12
7
14
6
9
10
8
8

21
19
20
13
12
15
5
4
5
STEP 3
Place the tray (item 5) on the lower part of the holders and the cooking grate (item
4) on the upper part of the holders as shown in picture 09. When using the skewer
support (item 21), remove the cooking grate and attach it to the grill bowl as shown
in picture 10.
(The ceramic washer must be between the bowl and the metallic washer.)
3.4. MODEL TCP-450 (Reference nº 26500/008)
3.4.1. Components:
ITEM DESCRIPTION QUANTITY
1STAINLESS STEEL LEG 3
2STAINLESS STEEL OUTER HOLDER 3
3STAINLESS STEEL INNER HOLDER 3
4STAINLESS STEEL COOKING GRATE 1
5ENAMELED STEEL CHARCOAL TRAY 1
6ENAMELED STEEL BOWL 1
7UTENSIL FOR HANDLING COOKING GRATES 1
8CHROME STEEL TRIANGLE 1
9M5 SCREW 3
10 M6 SCREW 6
11 M6 NUT 6
Picture 10
Picture 11
Picture 09
STEP 4
Attach the holder (item 19) to the lid (item 20) using the M5 screw (item 15), a
metallic washer (item 12), and a ceramic washer (item 13) as shown in picture 11.
(The ceramic washer must be between the bowl and the metallic washer.)
4
7
5
3
6
10
2
1
8
9
11
9

3.4.2. Assembly instructions
STEP 1
Align two M6 screws (item 10) with the holes in the outer holder (item 2) according
to picture 12. Insert the holder with the screws into the bowl (item 6), making sure
that the attachment holes for the legs face the center of the grill as shown in picture
13. Align the inner holder (item 3) while holding the screws and secure the M6 nuts
(item 11). Tighten them well as shown in picture 14. Repeat the same procedure for
the other two sets of holders.
STEP 2
Hold the existing pin on the leg (item 1) and insert it into the securing hole of the
outer holder (item 2) according to picture 15. Make sure that the hole of the outer
holder is facing the inside of the grill structure. Repeat the same procedure for the
other two legs. To assemble the chrome steel triangle (item 8), align the hole of the
outer holder as well as the leg holes properly.
STEP 4
Place the charcoal tray (item 5) on the supports of the three inner holders according
to picture 17. Then place the cooking grate (item 4) on the upper supports of these
same holders as shown in picture 18.
STEP 3
Position the chrome steel triangle (item 8) and secure it with M5 screws (item 9) as
shown in figure 16.
Picture 13
Picture 14
Picture 16
Picture 12
Picture 15
Picture 17
Picture 19
Picture 18
Picture 20
NOTE: The cooking grate (item 4) is double-sided, meaning it can be used on both
of its sides:
• With the channel in a “V” position (picture 19), it reduces flames and results in
closer markings.
• With the channel in a “ ” position (picture 20), it reduces smoke and results in
more spread out markings. Cleaning is easier when the grill is used in this position.
V
10
6
Attachment
hole
3
11
2
2
1
9
8
4
5
10