Transcend DrivePro 110 User manual

User’s Manual
Dashcam
DrivePro 110
2023/04
(Version 2.0)

Table of Contents
1. System Requirements ................................................................... 2
2. Package Contents.......................................................................... 2
3. Getting Started ............................................................................... 4
3-1 Overview ...........................................................................................................................4
3-2 Inserting a microSD Memory Card..................................................................................4
3-3 Mounting the DrivePro.....................................................................................................6
3-4 Connecting to Power .......................................................................................................7
3-5 Function Buttons..............................................................................................................8
3-6 LED Indicator....................................................................................................................8
3-7 Setting the Date and Time...............................................................................................9
4. Recording Videos........................................................................... 9
4-1 Recording Screen.............................................................................................................9
4-2 Emergency Recording ...................................................................................................10
5. Browsing Photos and Playing Videos........................................ 11
5-1 Playing Videos / Browsing Photos ...............................................................................11
5-2 Deleting Videos ..............................................................................................................12
5-3 Protecting Videos...........................................................................................................12
6. Settings......................................................................................... 13
6-1 Menu Options .................................................................................................................14
6-2 Firmware Upgrade..........................................................................................................16
7. DrivePro Toolbox Software......................................................... 17
8. Transferring Files to a Computer ............................................... 17
9. Troubleshooting........................................................................... 20
10. Safety Cautions............................................................................ 21
11. Specifications............................................................................... 22
12. Recycling and Environmental Protection.................................. 23
13. EU Compliance Statement .......................................................... 23
14. Federal Communications Commission (FCC) Statement ........ 23
15. Warranty Policy............................................................................ 24
16. GNU General Public License (GPL) Disclosure ........................ 24
17. End-User License Agreement (EULA)........................................ 24
18. Eurasian Conformity Mark (EAC) ............................................... 24

2
1. System Requirements
System requirements for connecting the DrivePro to a desktop or a laptop with a working USB port
and for using the DrivePro Toolbox:
Windows®10 or later
macOS®10.11 or later
2. Package Contents
The DrivePro dashcam package includes the following items:
DrivePro Dashcam
Adhesive Mount or Suction Mount
Car Lighter Adapter
microSD Memory Card

3
Quick Start Guide
Warranty Card

4
3. Getting Started
3-1 Overview
3-2 Inserting a microSD Memory Card
Before you can start recording, you need to insert a microSD memory card into the DrivePro.
Please use a microSD memory card with 32 GB, 64 GB, 128 GB or 256 GB capacity (Class 10 or
above).
1. Insert a microSD memory card into the card slot of the DrivePro.
WARNING
1. Always format a new memory card in the DrivePro before using it for the first time. To format
a new memory card, press the Settings button during recording, and select Format Card.
2. Formatting will erase all data on the memory card.
3. DrivePro 110 can only support FAT32 and exFAT file format, but not NTFS. Please select
FAT32 for firmware update.
LED Indicator
2.4”LCD
Display
Emergency
Button
Lens
Bracket
Socket
Memory Card
Socket
USB
Connector
Speaker
Microphone
Function
Buttons
Reset Button

5
2. To remove, push to eject the memory card out of the slot.
WARNING
Do not remove the memory card during shutdown to avoid damages to the memory card and loss
of recorded videos
The following table shows approximate recording time according to capacity (for reference
only):
Frame Rate
Card Capacity (FAT32)
32 GB
64 GB
128 GB
256 GB
2K QHD 1440P 30fps
3 hrs
6 hrs
12 hrs
25 hrs
Full HD 1080P 60fps
3 hrs
6 hrs
12 hrs
25 hrs
Full HD 1080P 30fps
4.5 hrs
9 hrs
18 hrs
36 hrs
HD 720P 60fps
9 hrs
19 hrs
39 hrs
78 hrs
HD 720P 30fps
17.5 hrs
35 hrs
72 hrs
145 hrs

6
3-3 Mounting the DrivePro
1. Insert the mount bracket into the top of the DrivePro, and slide sideways until you hear a
click.
2. Thoroughly clean and dry the area of the windshield you intend to mount the DrivePro. If
possible, mount it in the middle of the windshield and close to the height of the rear-view
mirror for the best field of view.
3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the
DrivePro to the windshield.
4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position.
5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure
that the DrivePro is securely locked in place.

7
3-4 Connecting to Power
1. Connect one end of the car lighter adapter to the DrivePro’s USB connector.
2. Connect the other end of the adapter to your car power outlet.
3. After the car engine is switched on, the DrivePro will automatically turn on and start
recording.
4. After the car engine is switched off, the DrivePro will automatically save the current
recording and power it off.
Note
1. Insert a microSD memory card into the DrivePro before connecting it to your car’s power
outlet.
2. Car power outlets of some types of vehicles will still supply power after the car engine is
turned off. If your car is of this type, please unplug your dashcam from the power outlet to
avoid unnecessary power consumption and unexpected issues.
3. Leaving the car engine switched off during long video recordings can completely drain the
car's power.

8
3-5 Function Buttons
Mode
Video Recording
Power
Browse Files
Settings
Take Photos
Browse/Settings
Back
Up
Down
OK
Video Playback
Back
/
Play/Pause
/
Protected/Unprotected
Delete
View Photos
Back
Up
Down
Delete
1. Press and hold the button for 3 seconds to manually turn on/off the DrivePro in any mode.
2. Long press the button to quickly turn on/off the microphone
3. Long press the button to quickly enter the Time-Lapse Video menu.
3-6 LED Indicator
LED Status
Definition
Solid Red
Standby
Flashing Red
Recording

9
3-7 Setting the Date and Time
Set the date and time first to ensure the recording time is right.
1. During video recording, press the Settings button .
2. Use / to select Date/Time, and press “OK.”
3. Use / to adjust values, and press “OK”to move to the next block.
4. Repeat step 3 above until the date and time settings are complete.
4. Recording Videos
4-1 Recording Screen
1. Recording status indicator
2. Video length
3. Video resolution / Frame rate
4. Voice record status
5. Battery status
6. Date / Time
After the car engine is switched on, the DrivePro will automatically turn on and start recording.
By default, one video file is saved for every 3 minutes of recording. To adjust the recording length,
please go to the Settings menu.
After the car engine is switched off, the DrivePro will automatically save the current recording and
power off.

10
4-2 Emergency Recording
30% of the storage space will be saved for emergency video files. Video files recorded in
Emergency Recording mode are protected from being overwritten. To adjust the recording length,
please go to the Settings menu.
Manual Emergency Recording:
During video recording, press the emergency button on the left-hand side of the DrivePro to
activate Emergency Recording mode. The emergency icon will appear on the screen when
activated.
G-Sensor Emergency Recording:
During video recording, the DrivePro automatically activates Emergency Recording mode when
detecting a collision or hit.
If the G-Sensor sensitivity is set to “High”, even minor shocks activate Emergency
Recording mode.
If the G-Sensor sensitivity is set to “Low”, only significant shocks activate Emergency
Recording mode.
G-Sensor sensitivity can be adjusted in the Settings menu.
Note
Loop recording is enabled by default. The earliest emergency files will be overwritten by the latest
emergency files recorded.

11
Low Battery
Please connect the DrivePro to the power supply immediately after the Low Battery warning pops
up to avoid errors occurring with the system time. Please avoid using the built-in battery to record
videos directly.
5. Browsing Photos and Playing Videos
5-1 Playing Videos / Browsing Photos
1. During video recording, press the Browse button .
2. Use / to select either Normal,Emergency, or Snapshot, and press “OK.”
3. Use / to select the desired video file, and press “OK.”
Note
Please fully charge the DrivePro before using.

12
4. Press to pause playback. Press again to resume playback.
5. Press to return to the video file list.
5-2 Deleting Videos
1. During the playback of a video file, press . The message “Delete?” will pop up.
2. Use / to select “Yes,” and press “OK”to delete the file.
5-3 Protecting Videos
1. During the playback of a normal video file, press . The message “Lock?” will pop up.
2. Use / to select “Yes,” and press “OK”to protect the file.

13
6. Settings
In the Settings menu, you can adjust video resolution, recording time and G-Sensor sensitivity. You
can also set the date/time, change the interface language, format the memory card, and upgrade
firmware.
1. During video recording, press the Settings button .
2. Select the preferred menu option using / , and press “OK.”
3. Select the desired setting using / , and press “OK.”
4. Press to return to the Settings menu.

14
6-1 Menu Options
Camera
Icon
Feature
Function / Option
Resolution
Set the resolution/quality for video recording.
Note: Available options are displayed depending on your model.
1440P 30fps /1080P 60fps /1080P 30fps /720P 60fps /720P 30fps
Exposure
Value
Adjust exposure composition value to lighten or darken the preview
screen.
+2.0 / +1.5 /+1.0 / +0.5 / 0.0 (default) / -0.5 / -1.0 / -1.5 / -2.0
Microphone
Turn off/on the microphone during video recording.
Disable / Enable (default)
Video
Length
Set the recording length of each recorded video file.
1 min / 3 mins (default) / 5 mins
Video Stamp
Display the recording time of the video.
Disable /Enable (default)
Loop
Recording
Overwrite the earliest video files with new ones if the microSD card is full.
Disable / Enable (default)
Light
Frequency
Select the appropriate frequency to avoid flashing A/C light.
50 Hz (default) / 60 Hz
Time-Lapse
Video
Set a preferred time interval to make time-lapse videos.
Time-lapse video mode can only be enabled manually; once enabled, it
will replace Normal recording mode.
Note: To prevent the car battery from being completely drained, the DrivePro will
automatically power off after 48 consecutive hours of recording in Time-Lapse Video
mode.
Disable (default) / 1 sec/shot /2 sec/shot /4 sec/shot
Driving Assistant
Icon
Feature
Function / Option
Headlight
Reminder
When the DrivePro detects poor lighting conditions, the headlight
reminder will automatically activate.
Disable (default) / Enable
Driver
Fatigue Alert
Remind the driver of the need to rest after driving for a preset,
driver-determined period of time.
Disable (default) /1 hour /2 hours / 3 hours / 4 hours

15
System
Icon
Feature
Function / Option
Volume
Set the speaker volume level.
0 to 7 (Choose 0 to switch on Silent Mode)
G-Sensor
Adjust the sensitivity of the G-Sensor.
Disable / Low (default) / Medium / High
Delay
Power Off
Schedule the DrivePro to shut down at a certain time.
Disable / 10 secs (default) / 30 secs
Auto Display
Off
Set duration for display to automatically turn off after recording begins.
Note:Auto Display Off is disabled when Headlight Reminder or Driver Fatigue Alert
is enabled.
Never (default) / After 1 min / After 3 mins
Date/Time
Set the date, time, and time zone.
Language
Set the on-screen display menu language.
English /繁 體 中 文 /简 体 中 文 /日 本 語 /Deutsch / Español /
Français /Italiano / Русский / Português / Ελληνικά /Türkçe /
한국어 /ไทย
Format Card
Format the microSD memory card.
WARNING: Formatting will erase all the data stored in the card.
Cancel (default) /Confirm
Upgrade
Firmware
Keep your DrivePro up-to-date with the latest firmware version.
Note:
1. To prevent data loss, it is recommended that you backup your data to another
location before upgrading the firmware.
2. Download the latest version from Transcend website.
https://www.transcend-info.com/support/product/dashcam/drivepro-110
Cancel (default) /Confirm
Restore
Defaults
Reset all settings to their factory defaults.
Cancel / Confirm
Screen
Adjustment
Adjust the position of the recording screen.
Information
Display the DrivePro’s current firmware version, card capacity, and
model name/number.

16
6-2 Firmware Upgrade
1. After downloading firmware from Transcend website, decompress it and then put the
file in the “SYSTEM” folder of the microSD memory card.
2. Insert the microSD memory card that contains the latest firmware version into the card
slot of the DrivePro.
3. Connect the DrivePro to an external power outlet. Select Upgrade Firmware from the
Settings menu and press “OK”to start the firmware detection process. The DrivePro
will automatically find the latest firmware file. Select Confirm to complete the firmware
upgrade process.
Note
The firmware upgrade takes about 1 to 2 minutes. Please do not turn off the DrivePro while
upgrading. The DrivePro will restart automatically after the upgrade is complete.
WARNING
NEVER remove the power cord or the microSD memory card while the firmware is
being upgraded. If the DrivePro cannot be turned on due to firmware upgrade failure,
please contact Transcend customer service for technical support.

17
7. DrivePro Toolbox Software
The DrivePro Toolbox, developed for Windows and macOS, features a user-friendly interface that
allows you to select and play videos recorded on your DrivePro without the need to install separate
codecs.
1. Download the installation files from: https://www.transcend-info.com/downloads.
2. Install DrivePro Toolbox software on your desktop or laptop.
Useful features available for the DrivePro 110 include:
Features
Description
Video Sorting
Sort videos by filename, recording date, or group, which allows users
to search for recorded videos efficiently and to play them.
Smooth Video
Playback
Connect the DrivePro or use a microSD card reader or adapter to play
back recorded video events on your computer.
Edit and Trim
Videos
Select a video, trim it and save it as a new clip immediately.
You can also capture snapshots from your videos during playback.
License Plate
Recognition
Automatically identify the license plates in a video and extract footage
to allow users to perform a quick search.
Note: Available only on Windows 64-bit version.
8. Transferring Files to a Computer
To transfer files between the DrivePro’s memory card and your computer:
Option 1:
Take the microSD memory card out of the DrivePro, and insert it to a compatible card reader to
transfer files to your computer.
Option 2:
1. Insert the microSD memory card into the DrivePro.
2. Plug one end of a USB cable into the Micro-B USB port of the DrivePro.
3. Plug the other end of the cable into your desktop or laptop.

18
WARNING
DP110 package does not contain a USB cable.
The DrivePro will display the following screen when connected to a computer:
Microsoft Windows®10 or later
No drivers are required for connecting the DrivePro to your desktop or laptop. Windows® Operating
Systems have built-in drivers to support your DrivePro. Upon successful connection to your
computer, a new Removable Disk drive with a newly assigned drive letter representing the
DrivePro will automatically appear in My Computer, and a Removable Hardware icon will
appear in the Windows System Tray.
Your DrivePro is now ready to transfer data just like an external hard drive. To transfer videos,
simply copy files from the folder that represents the DrivePro.
Proper removal of your DrivePro (from Windows):
1. Click once on the Removable Hardware icon in the system tray.
2. A Safely Remove Hardware window will pop up. Click to continue.
3. A window stating, “The ‘USB Mass Storage Device’ device can now be safely removed from
the computer,” will pop up. Unplug your DrivePro from the USB port after seeing this
message.
Note
(E:) is an example drive letter –the letter in your “My Computer” window may differ.

19
macOS®10.11 or later
No drivers are required. Plug your DrivePro into an available USB port directly, and your computer
will automatically detect it.
Proper removal of your DrivePro (from macOS):
Drag-and-drop the Disk icon corresponding to your DrivePro into the trashcan, and then unplug
your DrivePro from the USB port.
WARNING
1. To prevent data loss, always follow the proper removal procedures when disconnecting the
DrivePro from your computer.
2. When the DrivePro is connected to a computer, it can only be used for transferring files.
You will not be able to use any of the DrivePro’s features at this time. Please disconnect
your DrivePro from the computer to resume normal function.
3. NEVER “format” or “initialize” the disk while the DrivePro is connected to your computer.