TRENDnet TFM-560U - DATA SHEETS User manual

Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TFM-560U
Version 11.22.04
556K (V.90) High Speed USB Fax Modem
Quick Installation Guide
Guide d'installation rapide du
fax modem USB à haut débit
Anleitung zur Schnellinstallation des
Hochgeschwindigkeits-USB-Faxmodem
Guía de instalación rápida del
Fax Módem USB de alta velocidad
Высокоскоростной факс-модем USB
Руководство по быстрой установке

Table of Contents
English ......................................................................................................
Troubleshooting .........................................................................................
1
1
2
3
4
17
14
1. Prepare for Installation ......................................................................
2. Product Detail ....................................................................................
3. Hardware Installation .........................................................................
4. Driver Installation ...............................................................................
5. Verify Installation ...............................................................................

Thank you for purchasing the TRENDnet TFM-560U 56K (V.90) High Speed
USB Fax Modem
This guide will help you set up your 56K (V.90) High Speed USB Fax Modem.
Following the installations should be quick and easy. If you run into problems,
please refer to the Troubleshooting section. If you need further technical
support, please visit www.TRENDNET.com or call technical support by phone.
Verify Package Contents
Please make sure you have everything in the box:
1
1. Prepare for Installation
English QIG
English
Minimum System Requirements
1. Pentium 166Mhz or faster processor with at least 16MB of RAM
2. USB slot
3. Windows XP, 2000, ME, or 98SE
TFM-560U Quick Installation Guide
One Telephone Cable
Driver CD-ROM
One USB Cable
Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
TFM-560U
Version 11.22.04
556K (V.90) High Speed USB Fax Modem
Quick Installation Guide
Guide d'installation rapide du
fax modem USB à haut débit
Anleitung zur Schnellinstallation des
Hochgeschwindigkeits-USB-Faxmodem
Guía de instalación rápida del
Fax Módem USB de alta velocidad
Высокоскоростной факс-модем USB
Руководство по быстрой установке

2
2. Product Detail
56K (V.90) High USB Fax Modem has one port that connects to the Internet
and a second port to connect to a USB slot in your PC.
English
Connect to phone line
Connect to PC/Laptop’s USB port

3
3. Hardware Installation
1. Plug one end of the USB cable into the USB slot on your PC. Plug the other
end of USB cable into the USB port of the (V.90) USB Fax Modem.
2. Plug one end of the telephone cord into the telephone port of the (V.90) USB
Fax Modem. Plug the other end of telephone cord into the telephone wall
jack.
English
2
1
1

4
4. Driver Installation
Windows XP
After completing the modem hardware installation, the Found New Hardware
Wizard will appear. Please insert the CD-ROM driver into your CD-ROM.
1. Click Install from a list or specific location (Advanced). Click Next.
2. Click Search for the best driver in these locations, and Click Include this
location in the search: Type E:\Drivers\WinXP in the text box. If your CD-
ROM uses a different letter than E, then use a different letter (i.e.
D:\Drivers\WinXP). Click Next.
English
NOTE: TRENDnet's TFM-560U 56K (V.90) has been fully tested under
all supported Windows Operating Systems and has been approved for
their functionality. For Windows XP, you will see a message regarding
“not passed Windows Logo testing”. Click Continue Anyway.

5English
3. Click Finish.
4. Click Yes.
5. After rebooting, open the Control Panel and double click the Modem icon.

6English
6. Click the Configuration tab and select the country/region that the modem
will be used. Click OK.
Note: If you would like to verify that the TFM-560U has been installed
properly for your windows, go to the Verify Installation section.
Congratulations!
Installation is now complete.

7English
Windows 2000
After completing the modem hardware installation, the Found New Hardware
Wizard will appear. Please insert the CD-ROM driver into your CD-ROM.
1. Click Next.
2. Click Search for a suitable driver for my device (recommended). Click
Next.

8English
3. Click CD-ROM drives, and Click Specify a location. Click Next.
4. Type D:\Drivers\Win2K in the text box. If your CD-ROM uses a different
letter than D, then use a different letter (i.e. E:\Drivers\Win2K). Click OK.
5. Click Next.

9English
6. Click Finish.
After completing the modem hardware installation, the Add New Hardware
Wizard will appear. Please insert the CD-ROM driver into your CD-ROM.
1. Click Specify the location of the driver (Advanced). Click Next.
NOTE: TRENDnet's TFM-560U 56K (V.90) has been fully tested under
all supported Windows Operating Systems and has been approved for
their functionality. For Windows XP, you will see a message regarding
“not passed Windows Logo testing”. Click Yes.
Note: If you would like to verify that the TFM-560U has been installed
properly for your windows, go to the Verify Installation section.
Congratulations!
Installation is now complete.
Windows ME

10 English
2. Click Search for the best driver for your device. (Recommended) and
Click Specify a location. Type D:\Drivers\WinMe in the text box. If your
CD-ROM uses a different letter than E, then use a different letter (i.e.
D:\Drivers\WinMe). Click Next.
3. Click Next.
4. Click Finish.

11 English
5. Repeat steps 1-4.
After completing the modem hardware installation, the Add New Hardware
Wizard will appear. Please insert the CD-ROM driver into your CD-ROM.
1. Click Next.
Note: If you would like to verify that the TFM-560U has been installed
properly for your windows, go to the Verify Installation section.
Windows 98SE
Congratulations!
Installation is now complete.

12 English
2. Click Search for the best driver for your device. (Recommended). Click
Next.
3. Click CD-ROM drive, and Click Specify a location: Type D:\Drivers\Win98
in the text box. If your CD-ROM uses a different letter than E, then use a
different letter (i.e. D:\Drivers\Win98). Click Next.

13 English
5. Click Finish.
6. Make sure D:\Drivers\Win98 is written in the text box. Click OK.
Note: If you would like to verify that the TFM-560U has been installed
properly for your windows, go to the Verify Installation section.
4. Click Next.
Congratulations!
Installation is now complete.

14 English
5. Verify Installation
Windows XP
1. Click Start, and then click Control Panel.
2. Double-click the System icon. On the Hardware tab, click Device Manager
button.
3. Expand the “Modems” heading to verify that the SmartUSB56 Voice
Modem has been installed.
4. Expand the “Sound, video and game controllers” heading to verify that the
Unimodem Half-Duplex Audio Device has been installed.

15 English
Windows 2000
1. Click Start, highlight Settings, and then click on Control Panel.
2. Double-click the System icon. On the Hardware tab, click Device Manager
button.
3. Expand the “Modems” heading to verify that the SmartUSB56 Voice
Modem has been installed.
4. Expand the “Sound, video and game controllers” heading to verify that the
Unimodem Half Duplex Wave Device has been installed.

16 English
Windows ME/98SE
1. Click Start, highlight Settings, and then click on Control Panel.
2. Double-click the System icon, and click Device Manager tab.
3. Expand the “Modems” heading to verify that the SmartUSB56 Voice
Modem has been installed.
4. Expand the “Sound, video and game controllers” heading to verify that the
Unimodem Half Duplex Wave Device has been installed.

Q1.
A1.
Q2.
A2.
After I physically put in the modem, the computer does not detect the
modem?
Make sure the computer meets the minimum system requirements as shown
at the beginning of this quick installation guide. Also try putting the modem into a
different USB slot.
After successful installation of the TFM-560U 56K (V.90) High Speed
USB Fax Modem, I try to connect to the internet but I get no dial tone. What
should I do?
1. Ensure that the telephone cord is securely connected at both modem and wall
outlet.
2. Unplug the telephone cord from the computer and connect it directly to a
telephone from the wall outlet. Check for a dial tone. If there is none, the problem
is in the telephone cord or system. Call your telephone service provider.
3. Double-check your country setting. Different country setting will cause different
modem performance. Please select the correct country as you located.
4. Check modem performance with a direct line from your telephone company.
Some PBXs may cause the telephone line condition change and affect modem
performance.
If you have any questions regarding the TFM-560U 56K (V.90) High Speed USB FAX
Modem, please contact Trendware Technical Support Department.
Troubleshooting
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
Technical Support Hours
7:00AM ~ 6:00PM, Monday through Friday
Pacific Standard Time (except holidays)
Contact Technical Support
Telephone:[phone]
Fax: [phone]
Website: www.TRENDNET.com
17

Copyright ©2004. All Rights Reserved. TRENDware International, Inc.
TRENDnet
TRENDware, USA
What's Next in Networking
@
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDware’s website at http://www.TRENDNET.com
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA 90505
http://www.TRENDNET.com