TRENDnet TPE-S160 User manual

FEATURES
• 16 x 10/100/1000Mbps Auto-MDIX RJ-45 PoE portsOn/off power switch
• IEEE 802.3af Power over Ethernet (PoE) compliant
• Supports PoE Powered Device (PD) classifi cation
• Provides 15.4 watts per PoE port
• 3.2Gbps switching fabric
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.5Mbits RAM Data Buffer
• 4K MAC address entries
• Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
• Plug and Play
• Sturdy 19” wide metal enclosure
• Rack mounting hardware included
• 3-year limited warranty
TPE-S160
rev: 04.20.2011
16-Port 10/100Mbps PoE Switch
TPE-S160(V1.0R)
The 16-Port 10/100Mbps PoE Switch, model TPE-S160, reduces
equipment and installation costs by delivering data and power over
existing Ethernet cables to Power over Ethernet (PoE) enabled
devices such as Access Points and IP Cameras. Boost offi ce
effi ciency and reduce network congestion with a total switching
capacity of 3.2Gbps.
LED indicators display device status for easy power management and
troubleshooting. An internal power supply reduces clutter and delivers
15.4 Watts to each PoE port. A convenient on/off button is located on
the back of the switch. Non-PoE devices can connect to the
switch—auto-sensing PoE technology cuts power to non-PoE
connected devices. Use TRENDnet’s PoE Splitter to install non-PoE
devices in remote locations.

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time,
without notice. For the most recent product information please visit http://www.trendnet.com Copyright ©TRENDnet.All Rights Reserved.
NETWORKING SOLUTIONS
16-Port 10/100Mbps PoE Switch
TPE-S160(V1.0R)
CONTACT INFORMATION
20675 Manhattan Place,Torrance, CA 90501 USA
Tel: [phone]
Fax: [phone]
Web: www.trendnet.com
Email: [email protected]
1-888-326-6061
PACKAGE CONTENTS
TPE-S160
Multi-Language Quick Installation Guide
Rackmount hardware
Power cord (1.8 m / 6 ft.)
RELATED PRODUCTS
TV-IP512P ProView PoE Internet Camera
TPE-112GS Gigabit Power over Ethernet (PoE) Splitter
TPE-80WS 8-Port Gigabit Web Smart PoE Switch
SPECIFICATIONS
HARDWARE
Standards • IEEE 802.3 10Base-T • IEEE 802.3u 100Base-TX • IEEE 802.3af Power over Ethernet • IEEE 802.3x Flow Control;
Ports • 16 x 10/100Mbps Auto-MDIX PoE ports
Data Transfer Rate • Ethernet: 10/20Mbps (half/full duplex) • Fast Ethernet: 100/200Mbps (half/full duplex)
Data RAM Buffer • 1.5 Mbps
Address Table • 4K MAC entries
Power Switch • On / off power button
Switch Fabric • 3.2Gbps
Power • 100~240VAC 50/60Hz, internal universal switching power
Diagnostic LEDs • Power, Link/Activity, PoE Act/Status
Power Consumption • 6 Watts max. (no Powered Device (PD) connected)
• 260 Watts max. (16 PoE devices connected)
Temperature • Operating: 0° ~ 45°C (32° ~ 113°F) • Storage: -10° ~ 70°C (14° ~ 158°F)
Humidity • Max. 95% (non-condensing)
Dimensions • 440 x 220 x 44 mm (17.3 x 8.7 x 1.7 in.)
Weight • 3.1 kg (6.9 lbs.)
Certifi cations • CE, FCC
PoE
Power over Ethernet • Up to 15.4 watts per port; PD classifi cation • Polymer switch for short protection
• PoE: pin 3,6 for power+ and pin 1,2 for power-