TRENDnet TK-408K Parts list manual

TK-408K
Quick Installation Guide

Español .....................................................................................................
Specifications ............................................................................................
Troubleshooting ........................................................................................
1
1
2
3
5
6
1. Antes de iniciar ..................................................................................
2. Cómo conectar ..................................................................................
3. Cómo utilizar el conmutador KVM .....................................................
Table of Contents
Version 05.04.06

Aplicación
Monitor compatible con VGA o SVGA
Teclado PS/2 tipo Mini-Din de 6 pins
Ratón PS/2 tipo Mini-Din de 6 pins
Altavoces
Micrófono
(opcional)
(opcional)
Requisitos del sistema
Español
1
1. Antes de iniciar
TK-408
4 cables KVM combinados 3-en-1
4 Cables de Audio/Mic
Guía de instalación rápida
Contenidos del paquete
Microphone
LCD Monitor
4-Port PS/2 Audio
KVM Switch Kit
(TK-408K)
Keyboard Mouse
Speakers
Cables
PC 3 PC 4PC 1 PC 2
Cables Cables Cables

Español
2
2. Cómo conectar
Importante: DESCONECTE todos los PCs antes de conectarlos al conmutador
KVM. Tenga en cuenta que los cables incluidos y las conexiones del
conmutador KVM están codificados por colores para su comodidad.
La instalación ha sido completada
3. Conecte la otra punta del Cable
KVM combinado 3-en-1 al canal
de PC disponible.
5. ENCIENDA los PCs conectados y
espere hasta que le aparezca el
escritorio.
2. Conecte la punta respectiva del
Cable KVM combinado 3-en-1 y
del Cable de Audio/Mic a su PC.
1. Conecte el Monitor, Teclado,
Ratón, Micrófono y Altavoces
compartidos al puerto consola de
su conmutador KVM.
4. Conecte la otra punta del Cable de
Audio/Mic al mismo canal de PC
disponible.

Para alternar entre PCs, puede usar los Push Buttons (Botones de arranque)
en el Conmutador KVM o los comandos Hot-key (Ejecución inmediata) del
teclado.
Comandos Hotkey
Un comando hotkey del teclado consiste en pulsar tres teclas:
Comando Hotkey = ScrLk + ScrLk + Tecla(s) de comando
Después de pulsar la tecla ScrLk, dispone de 2 segundos para pulsar la tecla
ScrLk otra vez. Ahora dispone de 2 segundos para presionar una tecla de
comando. Si usted no pulsa una tecla en el plazo de 2 segundos, el
conmutador saldrá del modo hotkey.
Nota
1. El comando Hotkey sólo funciona con las teclas numéricas de la parte
superior del teclado.
2. Cuando establezca la vinculación de la conmutación entre el puerto PC y el
puerto Audio se activa la secuencia hotkey, cualquier conmutación entre PC
y Audio/Mic se establece de forma conjunta.
3. Para sistemas operativos no-PnP (Linux, Windows NT 4.0), utilice por favor
los siguientes comandos para reiniciar la configuración del ratón.
Español
3
3. Cómo usar el conmutador KVM
ScrLk +ScrLk +M+1
ScrLk +ScrLk +M+2
ScrLk +ScrLk +M+3
2-key mouse setting:
3-key wheel mouse setting:
5-key wheel mouse setting:
Convención Hotkey:
La pulsación de la tecla hotkey indica que debe pulsar la tecla individual
consecutivamente una después de otra, no simultáneamente.

Comando Hotkeys Descripción
Hoja de referencia rápida para el TK-208K
Seleccione PC
Seleccione el canal
Audio/Mic
Próximo canal PC
superior
Vincule la
conmutación del PC
y del Audio/Mic
Ratón de consola/
Reiniciación de
Teclado
Desvincule la
conmutación del PC
y del Audio/Mic
Auto-exploración
Próximo canal PC
inferior
Detener Auto-
exploración
ScrLk ScrLk X
+ +
x = 1 ~ 2 para el número de canal de la PC
ScrLk ScrLk
+ +
(flecha arriba)
ScrLk ScrLk
+ +
(flecha abajo)
ScrLk ScrLk
+ + W
ScrLk ScrLk
+ + End
ScrLk ScrLk
+ + S
Press any key on keyboard
Seleccione el canal PC activo.
Seleccione el canal Audio/Mic activo
Seleccione el siguiente PC inferior disponible
Active la vinculación de la conmutación del puerto PC y
del puerto Audio/Mic.
Reiniciar ratón/teclado en el lado de la consola.
(funciona únicamente con sistemas operativos no-PnP)
Active la vinculación de la
conmutación del puerto PC y
del puerto Audio/Mic.
Auto-exploración a través de cada canal conectado para
una rápida lectura en pantalla de cada canal (duración
de la exploración =10 segundos) .
Seleccione el siguiente PC superior disponible
Pulse el botón panel de mando Finalizar actividad de
Auto-exploración.
(Fx es una tecla de función) Fx= F1~F4
ScrLk ScrLk
+ +
FX
ScrLk ScrLk
+ +
Q
Español
4

Computer Connections: 4
KVM Cable Connectors
(all male):
Console Port Connectors
(all female):
Keyboard: PS/2 Keyboard 6-pin Mini Din
Mouse: PS/2 Keyboard 6-pin Mini Din
Monitor: VGA HDB 15-pin
Speaker: 3.5mm audio in/out jack
Microphone: 3.5mm microphone in/out jack
5
Specifications
To PC:
To KVM: 1 x VGA/SVGA HDB 15-pin
KVM
To PC:
Audio
To KVM:
Port Selection: Push Button and Hot-Key Commands
Auto-Scan Intervals: 5 seconds
Keyboard State: Saved and Restored
Power Type: PS/2 Interface Power
Dimensions: 167 x 80 x 28mm (6.6 x 3.2 x 1.1in.)
Weight: 178g (6.3oz.)
0º ~ 40ºC (32º ~104º F)Operating Temperature:
-20º ~ 60ºC (-4º ~ 140º F)Storage Temperature:
0%~90%, Non-Condensing
Humidity:
FCC and CECertifications:
KVM Cable: 4 sets of 1.8 M (6ft) KVM Cables
• 1 x PS/2 Keyboard 6-pin Mini Din
• 1 x PS/2 Mouse 6-pin Mini Din
• 1 X VGA HDB 15-pin
• 1 x 3.5mm audio in/out jack
• 1 x 3.5mm microphone in/out jack
• 1 x 3.5mm audio in/out jack
• 1 x 3.5mm microphone in/out jack

Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Where is the power supply? I did not find one in the box.
I have the KVM switch connected properly, but my keyboard and mouse don't
work.
Please make sure your PS/2 port is working properly by testing it with your
other PS/2 devices. Once you confirm that the PS/2 port is functional, please
reboot your computers, and try to use the KVM switch again.
Can I connect and disconnect the PS/2 cables while the computers are turned
on?
Will the KVM switch remember the keyboard settings between computers?
Yes, the KVM switch will remember the keyboard settings when switching
between your computers. (i.e.: Cap lock, Num key, etc.)
How do I switch from one computer to another with the KVM switch?
The TK-408K does not require a power adapter. It draws power from your
computer's PS/2 connections. As long as your KVM Switch is connected to the
PS/2 port, it will receive the necessary power to function.
Do not try to connect the KVM Switch to the computers while the computers
are in powered-on state, because the computers may have difficulty recognizing
your shared PS/2 keyboard and PS/2 mouse.
You may switch between computers by pressing the Push Buttons on the KVM
switch or by using the Hot-Key commands via keyboard. For a list of Hot-Key
commands, refer to the "Quick Reference Sheet for TK-408K".
If you still encounter problems or have any questions regarding the TK-408K, please
contact TRENDnet's Technical Support Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
6
Troubleshooting

Limited Warranty
TRENDnet warrants its products against defects in material and
workmanship, under normal use and service, for the following lengths of
time from the date of purchase.
TK-408K - 2 Year Warranty
If a product does not operate as warranted above during the applicable
warranty period, TRENDnet shall, at its option and expense, repair the
defective product or part, deliver to customer an equivalent product or
part to replace the defective item, or refund to customer the purchase
price paid for the defective product. All products that are replaced will
become the property of TRENDnet. Replacement products may be new
or reconditioned.
TRENDnet shall not be responsible for any software, firmware,
information, or memory data of customer contained in, stored on, or
integrated with any products returned to TRENDnet pursuant to any
warranty.
There are no user serviceable parts inside the product. Do not remove
or attempt to service the product by any unauthorized service center.
This warranty is voided if (i) the product has been modified or repaired
by any unauthorized service center, (ii) the product was subject to
accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within
the applicable warranty period for a Return Material Authorization (RMA)
number, accompanied by a copy of the dated proof of the purchase.
Products returned to TRENDnet must be pre-authorized by TRENDnet
with RMA number marked on the outside of the package, and sent
prepaid, insured and packaged appropriately for safe shipment.
7

WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE
REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDnet NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR
USE OF TRENDnet'S PRODUCTS.
TRENDnet SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED
DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER'S OR ANY THIRD PERSON'S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE
BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT,
FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW
TRENDnet ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY
LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY
TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT TRENDnet’S OPTION. THIS DISCLAIMER OF LIABILITY FOR
DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of
the state of California.
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 Year
Warranty
8

Copyright ©2006. All Rights Reserved. TRENDnet.
3135 Kashiwa Street
Torrance, CA 90505
USA
Product Warranty Registration
Please take a moment to register your product online.
Go to TRENDnet’s website at http://www.trendnet.com
TRENDnet Technical Support
US Canada
24/7 Tech Support
Toll Free Telephone: [phone]
Europe (Germany France Italy Spain Switzerland UK)
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
Toll Free Telephone: [phone]
.
. . . . .