TRENDnet TK-802R User manual

Quick Installation Guide
TK-802R

Table of Contents
English 1
Troubleshooting 9
1. Before You Start 1
2. How to Install 2
3. Operation 5
Version 08.31.2009

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
1. Before You Start
1
?PS/2 Keyboard
?PS/2 Mouse
?VGA Compatible Monitor
?PS/2 KVM cables (e.g. TK-C06, TK-C10, TK-C15)
?Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux and Netware
Package Contents
?TK-802R
?Multi-Language Quick Installation Guide
?Daisy-Chain Cable
?Rack mount kit
?AC Power Adapter (9V DC, 1A)
System Requirements

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
2. How to Install
2
1. Turn OFF all computers and their peripherals,
and then disconnect all power cords.
5. Turn ON the connected computers one-by-one
and wait until each computer's desktop
appears.
4. Use the KVM cables to connect each computer
to the KVM switch. Note: Do not use the
supplied daisy-chain cable to connect to your
computer. You must purchase these KVM
cables separately.
3. Connect the included AC Power Adapter to the
KVM switch and then to a power outlet.
2. Connect the shared PS/2 keyboard, monitor,
and PS/2 mouse to the KVM switch's Console
Port.

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
3
Note:
1. Must use the daisy chain cable provided with the KVM switch
2. Only daisy chain the KVM switch with another TK-802R
3. Stackable up to 16 KVM switches
Daisy-Chain
9. Press Port 1 button on the first (master) switch
for 3 seconds to initialize the daisy chain.
6. Connect one end of the daisy-chain to the
Daisy chain in port on the first (master) KVM
switch.
7. Connect the opposite end of the daisy-chain
cable to the Console port on the second
switch (slave1)
8. If you have a third KVM switch, connect one
end of the daisy chain to the Daisy chain in
port on the second KVM switch (Slave 1). Then
connect the opposite end of the daisy-chain
cable to the console port on the third switch
(Slave 2). Repeat for each additional switch.
slave1
Master
slave2

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
4
Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave switch
because this will initialize only the switches downstream from this slave switch.
10. Turn ON the connected computers one-by-
one and wait until each computer's desktop
appears.
Rack Mount
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be
placed in a wiring closet with other equipment.
Note: If you would like to mount the KVM switch to a EIA 19” equipment rack, install the
included mounting brackets to the sides of the KVM switch, secure them with the screws
provided, and then mount the KVM switch to the equipment rack with the hardware
provided by the equipment rack manufacturer.
11. Attach the mounting brackets to both sides of
the switch and secure them with the provided
screws.
12. Carefully position the switch onto the rack.
Align the bracket to the screw holes on the
rack, then use the screws provided with the
equipment rack to mount the switch.
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet.

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
5
Note: To switch between computers, you can use the front-panel push buttons or the
Hot Key commands.
Push Buttons
Press the push buttons to switch between
computers.
LED Indicators
Bank Number: Indicates the number or sequence
of the switch when daisy chained. This number is
01 when the switch is not daisy chained.
Red LED light: KVM cable is connected and PC
is powering the KVM switch.
Green LED light: Indicates the selected PC port
is active, whether the computer is turned on or off.
3. Operation

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
6
Hot Key Commands
A keyboard hot key command consists of at least three keystrokes:
Hot Key command = Scroll Lock + + Command key(s)
After pressing the key, you have 2 seconds to press the Scroll Lock key
again. You then have another 2 seconds to press a command key. A beep confirms that
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the
switch will exit hot key mode.
To select a specific PC port
Scroll Lock
Scroll Lock
For example, to select port 1, hit the following key sequence:
Select PC =
Select PC =
Select PC =
Port numberBank number
th
For example, to select port 8 of the 10 KVM switch on a series of daisy chained
TK-802R's you hit the following key sequence:
Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.
For a list of all the Hot Key commands, please see the Quick Reference Sheet.
Scroll Lock Scroll Lock +
+A+B+Y+Z
Scroll Lock Scroll Lock +
+0+1+0+1
Scroll Lock Scroll Lock +
+1+0+0+8

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
7
On Screen Display (OSD) Control
To activate the OSD Menu, use the following hot-key command:
Note: For detailed information about the operation of the OSD, please refer the Quick
Referece Sheet.
Scroll Lock Scroll Lock +
+Space Bar

ENGLISHFRANÇAISDEUTSCHESPAÑOL
ÐÓÑÑÊÈÉ
8
Press any key on keyboard
Quick Reference Sheet for TK-802R
Autoscan
Beep Sound
On/Off
Reflash
EEPROM
Next higher
channel
Next higher
bank
(Arrow up)
(Arrow down)
Use arrow keys to
select and then
hit enter
Use arrow keys to
select and then
hit enter
Use arrow keys to
select and then
hit enter
Page Up
Page Down
- - -
- - -
(ab) = bank number
(yz)= 2-digit channel number
Description
Press Push Button
for a specific port
to the switch
Select the active bank
(switch) and channel
(computer)
Select the next lower
connected channel
Only works within
active bank
Select the next higher
connected channel
Only works within
active bank
Select the next lower
bank when multiple
switches are
daisy-chained
Select the next higher
bank when multiple
switches are
daisy chained
Toggle On/Off beep
during autoscan mode
Restore to Factory
Defaults except
password
- - -
- - -
- - -
- - -
- - -
- - -
Command Hot Keys OSD Front-panel
Find PC by
Name
Change PC
Name
Use arrow keys to
select and then hit
enter
- - -
- - -
Search presence of a
specific PC by name
Change the PC Name
- - -
- - -
Scroll Lock Scroll Lock +
+A+B+Y+Z
Scroll Lock Scroll Lock +
+B
Scroll Lock Scroll Lock +
+R
Scroll Lock Scroll Lock +
+S
Scroll Lock Scroll Lock +
+F
Scroll Lock Scroll Lock +
+
Scroll Lock Scroll Lock Space Bar
+
Scroll Lock Scroll Lock End
+
+
+
Scroll Lock Scroll Lock +
+
Scroll Lock Scroll Lock Page Up
+
+
Scroll Lock Scroll Lock Page Down
+
+
Select PC
Next lower
channel
Next lower
bank
Press on button
1 for 3 seconds - - -
- - -
- - -
Use arrow keys to
navigate, then hit
enter to select and
edit name
- - -
Press any button
or key
Reset /
Initialize
Show OSD
Menu
Autoscan
Stop Autoscan
Autoscan
with
Programmable
Delay Time
Resets/reboot/initialize
daisy-chain and
activates password
protection
Activates OSD menu
Autoscan through every
connected channel for
quick browsing of each
channel
End Autoscan activity
Specify a delay within a
range of 5~99 seconds
Press any push
button
- - -
- - -
Press any button
or key