TRENDnet Web Smart Switch Series User manual

TRENDnet User’s Guide
Cover Page

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
a
Thank you for purchasing your new TRENDnet Web
Smart Switch!
Please note: The scope of this user's guide encompasses multiple
products with varying features. Images, artwork, and other specificities
including port count, interfaces etc. may not be identical to the model
you purchased. Please consult the specific model specifications for your
unit for a full list of supported features.
Please ensure your switch’s firmware version is V2.10.010 or newer for
Layer 2+ management features. See the Firmware Upgrade section in
this document for additional information regarding the firmware upgrade
procedure.
Contents
Web Smart Switch Series Product Overview....................................2
TEG-082WS Overview.................................................................................................... 2
Package Contents ................................................................................................ 2
TEG-082WS Hardware Features .......................................................................... 2
TEG-204WS Overview.................................................................................................... 4
Package Contents ................................................................................................ 4
TEG-204WS Hardware Features .......................................................................... 4
TEG-284WS Overview.................................................................................................... 6
Package Contents ................................................................................................ 6
TEG-284WS Hardware Features .......................................................................... 6
TEG-524WS Overview.................................................................................................... 8
Package Contents ................................................................................................ 8
TEG-524WS Hardware Features .......................................................................... 8
Switch Installation ..........................................................................2
Desktop Hardware Installation...................................................................................... 2
Rack Mount Hardware Installation................................................................................ 2
Basic IP Configuration.................................................................................................... 3
Connect additional devices to your switch.................................................................... 6
Accessing switch management interfaces........................................7
Access your switch management page.......................................................................... 7
Dashboard ..................................................................................................................... 7
View your switch status information................................................................... 7
Switch View ................................................................................................................... 9
View your switch status information................................................................... 9
Real-time Statistics ........................................................................................................ 9
View your switch status information................................................................... 9
System..........................................................................................10

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
b
System Management................................................................................................... 10
Set your system information ............................................................................. 10
Cloud Settings.............................................................................................................. 11
L3 Feature.................................................................................................................... 11
IPv4 Interface..................................................................................................... 11
IPv4 ARP Aging Time .......................................................................................... 12
IPv4 Static ARP................................................................................................... 13
IPv4 Static/Default Route .................................................................................. 13
Set your IPv6 settings ........................................................................................ 14
Add IPv6 neighbors............................................................................................ 16
Configure IPv6 Routing Table ............................................................................ 17
DNS .............................................................................................................................. 18
Set your DNS server settings.............................................................................. 18
IP Access List................................................................................................................ 19
Restrict access to switch management page..................................................... 19
Administration............................................................................................................. 20
Change administrator password and add accounts........................................... 20
Timeout........................................................................................................................ 21
Change web idle login timeout settings ............................................................ 21
System Time ................................................................................................................ 22
Set the switch date and time............................................................................. 22
SSL................................................................................................................................ 23
Enable HTTPS/SSL (Secure Socket Layer) management access ......................... 23
SSH............................................................................................................................... 24
Enable SSH (Secure Shell) management access................................................. 24
Telnet........................................................................................................................... 25
Enable Telnet management access.................................................................... 25
DHCP Auto Configuration ............................................................................................ 26
Enable DHCP Auto Configuration....................................................................... 26
System Log................................................................................................................... 27
View and setup your switch logging .................................................................. 27
SNMP........................................................................................................................... 29
Settings .............................................................................................................. 29
View................................................................................................................... 30
Group................................................................................................................. 31
User ................................................................................................................... 32
Community ........................................................................................................ 33
Trap.................................................................................................................... 34
RMON .......................................................................................................................... 35
Settings .............................................................................................................. 35
Statistics............................................................................................................. 36
History ............................................................................................................... 37
Alarms................................................................................................................ 38
Events ................................................................................................................ 39
Statistics....................................................................................................................... 41
Traffic................................................................................................................. 41
Error................................................................................................................... 42
IEEE 802.3az EEE.......................................................................................................... 43
Enable IEEE 802.3az Power Saving Mode.......................................................... 43
Network .......................................................................................44
Physical Interface......................................................................................................... 44
Configure Physical Interfaces ............................................................................ 44
Spanning Tree.............................................................................................................. 46
Protocol ............................................................................................................. 46
Port .................................................................................................................... 47
MST.................................................................................................................... 49
Instance ............................................................................................................. 50
MST Port ............................................................................................................ 50
Trunk............................................................................................................................ 51
Settings .............................................................................................................. 51
Status................................................................................................................. 52

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
c
Port Priority ....................................................................................................... 52
Mirroring...................................................................................................................... 53
Configure port mirror settings........................................................................... 53
Loopback Detection..................................................................................................... 54
Enable loopback detection ................................................................................ 54
Static Unicast ............................................................................................................... 55
Add static unicast entries to the switch............................................................. 55
Static Multicast ............................................................................................................ 56
Add static multicast entries to the switch ......................................................... 56
IGMP Snooping ............................................................................................................ 57
Settings .............................................................................................................. 57
Router Ports....................................................................................................... 58
MLD Snooping.............................................................................................................. 59
Settings .............................................................................................................. 59
Router Port ........................................................................................................ 60
Multicast VLAN ............................................................................................................ 61
Multicast VLAN Settings..................................................................................... 61
Multicast VLAN Table......................................................................................... 61
Multicast VLAN Group Settings ......................................................................... 61
Multicast VLAN Access Settings......................................................................... 62
Multicast Filtering........................................................................................................ 63
Multicast Filtering.............................................................................................. 63
Bandwidth Control....................................................................................................... 63
Storm Control .................................................................................................... 63
Ingress Rate Limiting.......................................................................................... 64
Egress Rate Limiting........................................................................................... 64
VLAN ............................................................................................................................ 65
Tagged ............................................................................................................... 65
Port .................................................................................................................... 66
Forwarding......................................................................................................... 67
Dynamic............................................................................................................. 67
Private................................................................................................................ 68
Current............................................................................................................... 69
GVRP............................................................................................................................ 69
GVRP Global Settings......................................................................................... 69
Port Settings ...................................................................................................... 70
Time Settings ..................................................................................................... 71
Voice VLAN .................................................................................................................. 72
Settings .............................................................................................................. 73
OUI..................................................................................................................... 74
LLDP............................................................................................................................. 75
Enable and configure LLDP ................................................................................ 75
Settings .............................................................................................................. 75
Basic TLVs Settings............................................................................................. 77
Dot1 TLVs Settings ............................................................................................. 77
Dot3 TLVs Settings ............................................................................................. 77
MED Port Settings.............................................................................................. 77
LLDP Statistics Information................................................................................ 78
LLDP Local Port Information .............................................................................. 78
Neighbor............................................................................................................ 78
MAC VLAN ................................................................................................................... 79
MAC VLAN ......................................................................................................... 79
Protocol VLAN.............................................................................................................. 79
Protocol VLAN Profile ........................................................................................ 79
Protocol VLAN Profile Interface......................................................................... 80
QoS (Quality of Service) ................................................................81
CoS............................................................................................................................... 81
Set CoS priority settings..................................................................................... 81
Port Priority ................................................................................................................. 82
Set Port Priority ................................................................................................. 82
DSCP ............................................................................................................................ 82

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
d
Set DSCP (Differentiated Services Code Point) Class Mapping settings ............ 82
Scheduling Algorithm................................................................................................... 83
Set the Scheduling Algorithm ............................................................................ 83
IPv6 Traffic Class .......................................................................................................... 84
Configure the IPv6 Traffic Class Settings ........................................................... 84
Security.........................................................................................85
Port Security Global Settings ....................................................................................... 85
Configure Port Access Control ........................................................................... 85
Port Security Global Settings ....................................................................................... 85
Configure Port Access Control ........................................................................... 85
Port Security Address Settings..................................................................................... 86
Configure Port Security Address Settings .......................................................... 86
Security > Port Security > Port Address Settings ................................................ 86
Port Access Control...................................................................................................... 86
Configure Port Access Control ........................................................................... 86
Dial-in User .................................................................................................................. 87
Create Dial-In Users (Local Authentication Method)......................................... 87
RADIUS......................................................................................................................... 88
Add RADIUS Servers (RADIUS Authentication Method) .................................... 88
TACACS+ ...................................................................................................................... 89
Add TACACS+ Servers (TACACS+ Authentication Method)................................ 89
Destination MAC Filter ................................................................................................ 90
Destination MAC Filter....................................................................................... 90
Denial of Service .......................................................................................................... 91
Denial of Service (DoS)....................................................................................... 91
DHCP Snooping............................................................................................................ 92
Settings .............................................................................................................. 92
VLAN .................................................................................................................. 94
Interfaces........................................................................................................... 95
Binding............................................................................................................... 95
Dynamic ARP Inspection.............................................................................................. 96
Settings .............................................................................................................. 96
ARP Inspection Validation ................................................................................. 97
ARP Inspection Port Settings ............................................................................. 98
ARP Inspection VLAN ......................................................................................... 98
ARP Inspection Statistics.................................................................................... 99
ARP Inspection VLAN ......................................................................................... 99
ACL............................................................................................................................. 100
ACL Configuration Wizard................................................................................ 100
Access Profile List ............................................................................................ 101
ACL Finder........................................................................................................ 102
Tools........................................................................................... 104
Firmware Upgrade..................................................................................................... 104
Upgrade your switch’s firmware ..................................................................... 104
Firmware Upgrade via HTTP Settings .............................................................. 104
Firmware Upgrade via TFTP Settings............................................................... 105
Config Backup Restore............................................................................................... 106
Config Backup/Restore .................................................................................... 106
Backup/Restore via HTTP Settings................................................................... 106
Backup/Restore via TFTP Settings ................................................................... 106
Diagnostics................................................................................................................. 107
Cable Diagnostics Test ..................................................................................... 107
Reboot ....................................................................................................................... 108
Reboot/Reset to factory defaults .................................................................... 108
Ping............................................................................................................................ 109
Network Connectivity Test (Ping Tool) ............................................................ 109
Using the Web Smart Switch Management Utility .......................110
System Requirements................................................................................................ 110
Installation................................................................................................................. 110

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
e
Using the Utility ......................................................................................................... 111
Launching the Utility........................................................................................ 111
Discovery List ................................................................................................... 112
Monitor List ..................................................................................................... 112
Device Setting .................................................................................................. 113
Main Menu Options......................................................................................... 114
Hardware Features and Specifications.........................................115
Web Smart Switch Series Software & Technical Specifications .....117
Quick Installation GuideTroubleshooting.....................................119
Appendix ....................................................................................120

© Copyright 2023 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
Web Smart Switch Series
Web Smart Switch Series Product Overview
TEG-082WS Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•CD-ROM (Utility & User’s Guide)
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-082WS Hardware Features
Front View
Rear View
•Reset Button –Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Gigabit Ethernet Ports (1-8) –Connect network devices.
•SFP Slots (9-10) –Supports optional 1000BASE-SX/LX mini-GBIC modules
for uplink or downlink connections.

© Copyright 2023 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power turns off, the power cord is not
connected or the device is not receiving power.
•Gigabit Ethernet Port LEDs (1-8)
•Link/Activity
Green
on
:
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
•SFP Slots (9-10)
•Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 100Mbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off
No link established.

© Copyright 2023 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
Web Smart Switch Series
TEG-204WS Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•CD-ROM (Utility & User’s Guide)
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-204WS Hardware Features
Front View
Rear View
•Reset Button –Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Gigabit Ethernet Ports (1-20) –Connect network devices. Ports 17-20
are shared with SFP slots 17F-20F and are disabled when SFP slots (17F-
20F) are in use.
•SFP Slots (17F-20F) –Supports optional 1000BASE-SX/LX mini-GBIC
modules for uplink or downlink connections.

© Copyright 2023 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power turns off, the power cord is not
connected or the device is not receiving power.
•Gigabit Ethernet Port LEDs (1-20)
•Link/Activity
Green
on
:
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
•SFP Slots (17F-20F)
•Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 100Mbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off
No link established.

© Copyright 2023 TRENDnet. All Rights Reserved.
6
TRENDnet User’s Guide
Web Smart Switch Series
TEG-284WS Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•CD-ROM (Utility & User’s Guide)
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-284WS Hardware Features
Front View
Rear View
•Reset Button –Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Gigabit Ethernet Ports (1-28) –Connect network devices. Ports 25-28
are shared with SFP slots 25F-28F and are disabled when SFP slots (25F-
28F) are in use.
•SFP Slots (25F-27F) –Supports optional 1000BASE-SX/LX mini-GBIC
modules for uplink or downlink connections.

© Copyright 2023 TRENDnet. All Rights Reserved.
7
TRENDnet User’s Guide
Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power turns off, the power cord is not
connected or the device is not receiving power.
•Gigabit Ethernet Port LEDs (1-28)
•Link/Activity
Green
on
:
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
•SFP Slots (25F-28F)
•Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 100Mbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off
No link established.

© Copyright 2023 TRENDnet. All Rights Reserved.
8
TRENDnet User’s Guide
Web Smart Switch Series
TEG-524WS Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•CD-ROM (Utility & User’s Guide)
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-524WS Hardware Features
Front View
Rear View
•Reset Button –Press and hold the button 1~5 seconds and release to
reboot the device. Pressing the button more than 6 seconds will reset
the switch to factory defaults. The ports LEDs will turn off to indicate
that the reset was initiated.
•Gigabit Ethernet Ports (1-52) –Connect network devices. Ports 49-52
are shared with SFP slots 49F-52F and are disabled when SFP slots (49F-
52F) are in use.
•SFP Slots (49F-52F) –Supports optional 1000BASE-SX/LX mini-GBIC
modules for uplink or downlink connections.

© Copyright 2023 TRENDnet. All Rights Reserved.
9
TRENDnet User’s Guide
Web Smart Switch Series
Diagnostic LEDs
•Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power turns off, the power cord is not
connected or the device is not receiving power.
•Gigabit Ethernet Port LEDs (1-52)
•Link/Activity
Green
on
:
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
•SFP Slots (49F-52F)
•Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 100Mbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off
No link established.

© Copyright 2023 TRENDnet. All Rights Reserved.
10
TRENDnet User’s Guide
Web Smart Switch Series
TEG-30284 Overview
Package Contents
In addition to your switch, the package includes:
•Quick Installation Guide
•Power cord (1.8 m / 6 ft.)
•Rack mount kit
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
TEG-30284 Hardware Features

© Copyright 2023 TRENDnet. All Rights Reserved.
1
TRENDnet User’s Guide
Web Smart Switch Series
Package Contents
•Power LED
On
:
When the Power LED is on, the device is receiving power.
Off
:
When the Power turns off, the power cord is not
connected or the device is not receiving power.
•Gigabit Ethernet Port LEDs (1-52)
•Link/Activity
Green
on
:
When the Green LED is on, the respective port is
connected to a 1Gbps Ethernet network.
Amber
on
:
When the Green LED lights on, the respective port is
connected to a 10/100Mbps Ethernet network.
Green
Blinking
:
When the LED is blinking green, the port is transmitting or
receiving data on the network at 1Gbps speed.
Amber
Blinking
:
When the LED is blinking amber, the port is transmitting
or receiving data on the network at 10/100Mbps speed.
Off
When the LED is off, the respective port is disconnected.
•SFP Slots (25 –28)
•Link/Activity
Green on
:
When the SFP LED is on, the link established using
the SFP module is operating at 10Gbps speed.
Green blinking
:
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
10Gbps link established.
Amber on
When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Amber blinking
When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
Off
No link established.

© Copyright 2023 TRENDnet. All Rights Reserved.
2
TRENDnet User’s Guide
Web Smart Switch Series
Switch Installation
Desktop Hardware Installation
The site where you install the hub stack may greatly affect its performance. When
installing, consider the following pointers:
Note: Your switch model may be different than the one shown in the example
illustrations.
•Install the Switch in a fairly cool and dry place.
•Install the Switch in a site free from strong electromagnetic field generators (such
as motors), vibration, dust, and direct exposure to sunlight.
•Leave at least 10cm of space at the front and rear of the hub for ventilation.
•Install the Switch on a sturdy, level surface that can support its weight, or in an
EIA standard-size equipment rack. For information on rack installation, see the
next section, Rack Mounting.
•When installing the Switch on a level surface, attach the rubber feet to the
bottom of each device. The rubber feet cushion the hub and protect the hub
case from scratching.
Rack Mount Hardware Installation
The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in
a wiring closet with other equipment. Attach the mounting brackets at the switch’s
front panel (one on each side), and secure them with the provided screws.
Note: The switch model may be different than the one shown in the example
illustrations.
Then, use screws provided with the equipment rack to mount each switch in the rack.

© Copyright 2023 TRENDnet. All Rights Reserved.
3
TRENDnet User’s Guide
Web Smart Switch Series
Basic IP Configuration
3. Assign a static IP address to your computer’s network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
4. Open your web browser, and type the IP address of the switch in the address bar, and
then press Enter. The default IP address is 192.168.10.200.
5. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
6. Click System, L3 Feature, and then click IPv4 Interface.

© Copyright 2023 TRENDnet. All Rights Reserved.
4
TRENDnet User’s Guide
Web Smart Switch Series
7. Click on Edit for interface vlan1.
Note: All other functions of this page will be explained in detail in its respective section.
8. Configure the switch IP address settings to be within your network subnet, then click
Apply under the IP Settings.
9. When the confirmation message appears click OK.
Be sure to re-log back into the switch using the new IP address and save the
configuration to your flash.
NOTE: The configured settings are only applied to the switch’s temporary memory and
will be lost upon the next power-cycle. Please follow these next steps to save the
configurations to the switch’s NV-RAM to ensure the settings will remain throughout
power-cycles and reboots:
1. At the bottom of the left hand panel, click Save.
2. Select the Config you would like to save the settings to, then click Save Settings to
Flash.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.

© Copyright 2023 TRENDnet. All Rights Reserved.
5
TRENDnet User’s Guide
Web Smart Switch Series