TREX Nitros hypergain User manual

on your purchase of the Nitros, a premium hypergain pedal
from T-Rex Eects.
The Nitros is a hard-edged distortion with the ability to
shape the overall sound via the 3-band equalizer.
While you can certainly use it with the EQ set at (all knobs
at 12 o’clock), we encourage you to read on and experiment
with the EQ controls to uncover the full range of scorching
tones that this bad boy has to oer.
Congratulations

Try experimenting with the eq knobs for different sounds.
Dialing in a scooped metal distortion can be done by cutting
the mids and/or boosting the bass and treble. Conversely, to
obtain a more classic rock distortion, boost the mids a little
bit and fine tune by cutting the bass and treble frequencies
to taste.
Active eq is a very responsive and powerful tone-shaping
tool, so be sure to experiment with these controls at differ-
ent gain levels. The Nitros excels at a modern and aggressive
distortion sound but careful tweaking of the eq knobs will
tell you that “hypergain” is just one of its many faces!
Gain: Adjusts the amount of distortion in the effect.
Level: Adjusts the overall output level of the effect.
Bass, Mid, Treble: Active cut/boost of the low, middle and
high frequencies, respectively.
The three equalizer knobs have no effect on the sound when
set to 12 o´clock i.e. no boost or cut will be applied to the
signal.
To boost the lows, mids or highs, turn the associated knob
clockwise from the 12 o´clock position.
To cut those same frequencies, turn the knob anticlockwise
from the 12 o´clock position.
NITROS controls Hint

Input Impedance@1KHz Higher than 1M Ohm
Output Impedance@1KHZ Lower than 1K Ohm
Power supply Voltage 9V DC Minimum 8V DC / Maximum 12,5V DC
Current Draw @ 9V DC 30 mA
Maximum Input signal Vp/p 3Vp/p
Battery Type / Battery Life 9V battery 6F22 / 5 hours
External connectors Input Jack, Output Jack, 9V DC jack
Controls On/Off switch, Gain, Level,
Bass, Mid, Treble
Pedal size incl. knobs (W x H x D) 60 x 50 x 117 mm / 2,4 x 2 x 4,6 inch
Weight excl. battery & packaging 0,200 kg / 7,05 oz
T-REX WARRANTY CONDITIONS
T-Rex oers a 2-year warranty on all our products. In the unlikely event of a
malfunction, please contact our technical support at service@t-rex-eects.com
before sending us the product for repair. Read more about warrenty conditions
at www.t-rex-eects.com/service.
ABOUT T-REX
Based in Vejle, Denmark, T-Rex Eects makes classic and signature eect pedals
for the world’s best musicians. Our approach blends hi-tech innovation with
old-world craftsmanship - always in the service of killer tone.
EU REGULATIONS · ENVIRONMENT PROTECTION
T-Rex accepts and follows the regulations and directives issued by the EU. We
nd these environment protecting regulations very good, and are happy to fol-
low them.
REACh
RoHS