Tri-Tronics Pro 500XLS User manual

Tri-Tronics Owner’s Guide
The Field Series
and Pro Series Remote Trainers
Models covered:
Classic 70S• Trashbreaker UltraXLS • Flyway SpecialXLS
Upland SpecialXLS • Pro 100XLS • Pro 200XLS • Pro 500XLS
TRI-TRONICS OWNER’S GUIDE

CONGRATULATIONS!
You have purchased one of the finest dog training products available.
All Tri-Tronics Remote Trainers are proudly made in the USA.
Tri-Tronics Remote Trainers have been specially designed to meet
the needs of all dog trainers, from top winning professionals
to people training their very first dog. We manufacture
a variety of models – you can be sure that one of them
will be the right choice for your training needs.
Tri-Tronics takes great pride in the design, manufacture, service and
safety of all our products. We always want to hear from you, our
customer. If you have Internet access, you can visit our web site
24 hours a day at tritronics.com for the latest information available
regarding your product and our support services,
for training information, or to purchase accessories for your
Tri-Tronics Remote Trainer. We can also be reached at
[email protected] or by calling toll free at
1-800-456-4343.
Thank you for choosing Tri-Tronics, and happy training.
Product Specifications
Product specifications may change without notice or obligation since
Tri-Tronics is committed to a policy of continuous improvement.
Certain Tri-Tronics products are covered by one or more of these
U.S. patent numbers: 4794402, 4802482, 5054428, 5099797, 5193484,
5471954, D298872, 4947795, 4202293, 4335682, D410206, 6178439,
6549133 and patents pending.
Owner’s Registration Reply Card
Please take a moment to complete and return the Owner’s
Registration Reply Card. When you do, you’ll be “on file” at
Tri-Tronics. This will help ensure timely, no-questions-asked
warranty work should you need it. You may also register on
our website at tritronics.com.
First Edition, April, 2003
Published by Tri-Tronics, Inc., Tucson, Arizona
Copyright © 2003 Tri-Tronics, Inc.
All rights reserved. Printed in the USA.
CONGRATULATIONS!
Classic 70S, Trashbreaker UltraXLS, Flyway SpecialXLS,
Upland SpecialXLS, Pro 100XLS, Pro 200XLS, Pro 500XLS are registered
trademarks of Tri-Tronics Incorporated.

TABLE OF CONTENTS
QUICK GUIDE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FEATURE GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INSTALLING THE COLLAR STRAP . . . . . . . . . . . . . . . . . . . 7
SELECTING CONTACT POINT LENGTH . . . . . . . . . . . . . . . 8
INSTALLING THE TRANSMITTER ANTENNA . . . . . . . . . . 9
TURNING THE REMOTE TRAINER ON AND OFF . . . . . . 10
FITTING THE COLLAR ON THE DOG. . . . . . . . . . . . . . . . 10
SETTING THE INTENSITY. . . . . . . . . . . . . . . . . . . . . . . . . 12
USING THE STIMULATION BUTTONS . . . . . . . . . . . . . . . 13
THE “N” SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE TONE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
USING THE BEEPER (Upland SpecialXLS). . . . . . . . . . . . . . . 15
EXPECTED RANGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
RADIO SIGNAL ISSUES . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FCC COMPLIANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
MULTI-DOG MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
BATTERY CHARGING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
SERVICE AND WARRANTY . . . . . . . . . . . . . . . . . . . . . . . 20
PRODUCT SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . . 22

QUICK GUIDE
Before You Start…
1. Install the collar strap(s) (page 7).
2. Install the transmitter antenna (page 9).
3. Charge collar and transmitter batteries for 14 hours
(page 17).
Using the Remote Trainer
1. Turn the collar on: Press the gray button on the collar
next to the contact points until the collar light starts
blinking. You will also hear two tones, confirming that
the collar is on. (A rapid blink means that collar batteries
are low.) Repeat the turn-on process to turn the collar off.
One tone confirms that the collar is off. See page 10.
2. Fit the collar on the dog: Fasten the collar strap midway
between the dog's ears and shoulders, and buckle
snugly. The collar light faces towards the dog's nose.
Do not leave a collar on a dog continuously. See page 10.
3. Select an intensity level for training: Level 1 is the
lowest; level 6 is the highest (level 5 is the highest on
the Classic 70S). Release the transmitter button when
changing levels during training. Intensity selection
tips are in the training manual and video that came
with your Remote Trainer. See pages 12-13.
4. Stimulation: If you are unfamiliar with the stimulation
features of your model, see the chart on page14. Note that
when the intensity selector isset on “N,” the transmitter
buttons are disabled, and stimulation cannot occur.
5. Tone and Beeper button: On selected models, the
transmitter light is a push-button that controls an
audible tone in the collar. On the Upland SpecialXLS,
this button turns the Beeper on or off remotely.
See page 15.
6. Multi-dog models: The color-coded transmitter toggle
switch selects the active collar. See page 16.
Quick Guide Page 1

(Pro 200XLS Shown)
Antenna
Intensity
Knob
Selects intensity Transmitter
Light
See chart on page 6
for functions
On selected models,
this light is also a
push-button which
controls tone or
the Beeper
Transmitter
Charging Jack
Stimulation
Buttons
Removable
Button Guard
Use all or part
Page 2 Remote Trainer
FEATURE GUIDE

Contact Points
Fixed or changeable
length, depending
on model
Collar
Charging Jack
Collar Light
Feature Guide Page 3
On/Off Switch

* For button functions, see page 14.
** A separate manual covering the Upland SpecialXLS Beeper is shipped with
this model.
Page 4 Remote Trainer Feature Guide Page 5
Stimulation
Feature Contact Range Intensity Types Transmitter Total Tone Beeper** Multi-dog Options
Points Knob Buttons* Levels of (Strap Colors)
Model Levels Stimulation
Classic 70SFixed length One mile 1-5 Continuous One red 5 Yes No 2-dog units available
(all continuous) (orange, green)
3-dog units available
(orange, green, yellow)
Trashbreaker Changeable Two miles 1-6 Continuous One red 6 Yes No 2-dog units available
UltraXLS length (all continuous) (orange, green)
3-dog units available
(orange, green, yellow)
Flyway Changeable One mile 1-6 Continuous One red 24 No No 2-dog units available
SpecialXLS length Momentary Two black (18 momentary, (orange, green)
6 continuous)
Upland Changeable One mile 1-6 Continuous One red 24 No Yes 2-dog units available
SpecialXLS length Momentary Two black (18 momentary, (orange, green)
6 continuous)
Pro 100XLS Changeable One mile 1-6 Continuous Two red 24 Yes No 2-dog units available
length Momentary One black (18 continuous, (orange, green)
6 momentary)
Pro 200XLS Changeable One mile 1-6 Continuous One red 24 Yes No 2-dog units available
length Momentary Two black (18 momentary, (orange, green)
6 continuous)
Pro 500XLS Changeable One mile 1-6 Continuous Two black 36 Yes No 2-dog units available
length Momentary One mode (18 momentary, (orange, green)
switch 18 continuous)
FEATURE GUIDE

Collar Light
Action Collar Function
Double flash Collar is turned on
Glows steadily Collar is receiving signal
from transmitter
Single long flash Collar has just been
(3.5 seconds) turned off
Rapid flash Low batteries. Recharge the
collar soon
Glows steadily Collar is charging
while on charger
Note that in cold weather the low battery light may
come on prematurely.
Transmitter Light
Action Transmitter Function
Glows steadily while Transmitting
a button is pressed
Blinks rapidly (8 times Low batteries. Recharge
per second) while a the transmitter soon
stimulation button
is pressed
Glows steadily while Transmitter is charging
on charger
Page 6 Remote Trainer

INSTALLING THE COLLAR STRAP
Your Remote Trainer is shipped with the receiver separate
from the collar strap. Install the strap as shown in the
illustrations.
On multi-dog units, be sure to install the correct color strap
on each receiver. Use the colored strap that matches the
colored dot on the receiver.
You can easily adjust the strap for different sized necks by
sliding the receiver along the strap. If the strap is too long for
your dog, you can cut off excess length. Leave enough length
to go through any d-ring or keeper that is present.
(See “Fitting the Collar on the Dog” page 10.)
You may also use any collar strap that fits the receiver.
Slide the correct color strap through one side of the receiver,
then through the other side. Snug the strap firmly against the
surface of the receiver. Position the buckle where it is convenient
for the size of your dog's neck.
Installing the Collar Strap Page 7

SELECTING CONTACT POINT LENGTH
(Does Not Apply to Classic 70S)
Your Remote Trainer comes with two sets of contact points –
long and short.
The shorter points are installed in the unit at the factory and
are suitable for most coat lengths. For dogs with especially
long hair or thick undercoats, the long contact points will
give the best possible contact.
To change the contact points, always use the small wrench
supplied with your Remote Trainer. Avoid using tools which
may cause you to over-tighten the contact points.
Periodically check contact points for tightness.
Insert screw-in contact points as shown and only tighten with
the small wrench supplied with the Remote Trainer. Do not
over-tighten. Check contact points periodically for tightness.
Page 8 Remote Trainer

INSTALLING THE TRANSMITTER ANTENNA
Screw the transmitter antenna into the top of the transmitter.
Hold the antenna near the base and tighten by hand. Do not
over-tighten.
Installing the Transmitter Antenna Page 9
Hold the antenna near its base and tighten by hand.

TURNING THE REMOTE TRAINER ON AND OFF
The Remote Trainer consists of a hand-held transmitter and
a radio receiver on the dog’s collar. The collar must be turned
on before it can receive signals from the transmitter. Between
training sessions, you should turn the collar off to save
battery life.
To turn the Remote Trainer collar on, press the gray button
on the collar. The collar light will start blinking and you will
hear two tones, confirming that the collar is on.
To turn the collar off, press the gray button. The collar light
will make one long flash to indicate that the collar is turned
off. You will hear one tone, confirming that the collar is off.
You can also turn a collar off by placing it on its charger.
FITTING THE COLLAR ON THE DOG
Place the collar strap in the middle of the dog’s neck.
The receiver should be on the underside of his neck.
Place the receiver so the light is facing forward (towards
the dog’s nose).
Tighten the buckle by holding it with two fingers as you
pull the strap snug. Do not put any fingers under the strap
as you tighten it. Make it snug. Remote Trainers need to be
snug to work properly. A loose collar can cause inconsistent
stimulation.
Page 10 Remote Trainer
To tighten the collar on the
dog, hold the buckle as shown
and draw the strap snug.
Remote Trainers need to be
snug for consistent stimulation.

Always slip the
free end of the
collar strap
through the D-ring.
With models that have
a rectangular buckle,
be sure to slip the free
end of the strap
through both sides
of the buckle, and any D-ring or keeper that is present.
You can easily adjust the strap for different sized necks by
sliding the receiver along the strap. If the collar strap is too
long for your dog, you can cut off excess strap length. Leave
enough length to go through the D-ring or keeper with about
three inches to spare.
Note: Do not cut the strap of an Upland SpecialXLS until after
you have also installed the Beeper on the strap.
Please note that Remote Trainers are not designed to be
worn continuously by a dog. To prevent irritation caused by
rubbing, remove the collar for at least eight hours out of every
24-hour period. See the important message about avoiding
skin irritation on page 21.
Fitting the Collar on the Dog Page 11

SETTING THE INTENSITY
Your Remote Trainer can give corrections at different intensity
levels, so you can match the level of correction to both the
training situation and your dog’s temperament.
There are two ways to adjust intensity level while training.
One way is to use the intensity knob on the top of the
transmitter, as explained in this section. All Tri-Tronics
Remote Trainers give you this method of adjusting
stimulation intensity.
The other way is to use the transmitter buttons, as explained
on page 13. This method does not apply to those models
which have only one transmitter button (Classic 70Sand
Trashbreaker UltraXLS).
The transmitter intensity knob gives you a choice of 6
intensities (5 levels of intensity on the Classic 70S).
Intensity Knob Levels
Level N: Transmitter is off – no stimulation or tone
when a button is pressed
Level 1: Very low intensity
Level 2: Low intensity
Level 3: Medium intensity
Level 4: Medium-high intensity
Level 5: High intensity
Level 6: Very high intensity (not available onthe Classic 70s)
When increasing or decreasing intensity using the intensity
knob, be sure you have released the stimulation buttons,
or your new intensity selection will not take effect.
If you are not experienced at using Remote Trainers, there are
intensity selection tips in the training booklet and video that
came with your Remote Trainer.
Page 12 Remote Trainer

USING THE STIMULATION BUTTONS
Tri-Tronics Remote Trainers offer two types of stimulation,
“continuous” and “momentary” (Classic 70Sand Trashbreaker
UltraXLS offer only continuous stimulation).
Continuous Stimulation
The timing of continuous stimulation is controlled by the
trainer. Continuous stimulation stays on while the
transmitter button is pressed, up to the “time out” period,
described below.
Momentary Stimulation
The timing of momentary stimulation is pre-set. Momentary
stimulation stays on only very briefly, no matter how long the
button is pressed. To produce a second momentary correction,
press the button again. To produce a series of momentary
corrections, press the button for each correction.
Instantly Selectable Intensity
Most Tri-Tronics Remote Trainer models have more than one
stimulation button. This feature allows the trainer to choose
instantly among low, medium, and high stimulation. This
selection feature applies to either continuous or momentary
stimulation, or to both, depending on the model.
Being able to select low, medium, or high stimulation by
touch, using buttons, means that you do not need to look at
the transmitter when you select intensity levels – you can
keep your eyes on the dog at all times. It also means that
intensity changes are instantaneous. These features are an
advantage in many training situations.
Time-out Period
The time-out period is approximately 9 seconds. If the collar
times out, release the button briefly to restore collar function.
Please see the chart on the next page for the features of
your model.
Using the Stimulation Buttons Page 13

Page 14 Remote Trainer
Continuous
Continuous
Medium
momentary
Low
momentary
Both
buttons
high
momentary
Momentary
Medium
continuous
Low
continuous
Both
buttons
high
continuous
Toggle switch
selects continuous
or momentary mode
Both buttons
high continuous
or momentary
Medium continuous
or momentary
Low continuous
or momentary
Classic 70SFlyway SpecialXLS
Trashbreaker UltraXLS Upland SpecialXLS
Pro 200XLS
Pro 100XLS
Pro 500XLS
THE “N” SETTING
When the intensity knob is set on “N” (“neutral”), all transmitter
buttons are disabled and cannotactivate the stimulation, tone,
or Beeper on/off functions. This feature can be used to prevent
unwanted stimulation during times that your transmitter
might be accidentally bumped against objects. Remember to
move the knob to a number if you need to activate any of the
collar functions.

USING THE TONE (Does not apply to the
Flyway SpecialXLS or the Upland SpecialXLS.)
Some Remote Trainer models can make an audible tone
coming from the collar. The chart on pages 4 and 5 shows
which Remote Trainer models include this feature. The
meaning of the tone is determined by your dog’s training.
It can mean a particular command, a warning, praise, etc.
The training materials that came with your Remote Trainer
describe the use of this feature in more detail. The tone in the
XLS series hasbeen enhanced. Besides ensuring that the dog
will hear it under allenvironmentalconditions, the new louder
tone can help you locate a collar that hasfallen offa dog in the
field. Press the tone button frequently as you walk the field, and
listen for the collar.
Tone Button
The transmitter light is also a push-button. To activate the
tone, press this button. The tone does not work when the
intensity knob is set on “N.”
USING THE BEEPER (Upland SpecialXLS Models Only)
Pressing the button on the top of the transmitter turns the
Beeper on or off at a distance. This feature does not work
when the intensity knob is set on “N.” For complete
information about using the Beeper that comes with the
Upland SpecialXLS, see the separate Beeper manual included
with that model.
EXPECTED RANGE
Your Remote Trainer has a range of one mile (two miles on
the Trashbreaker UltraXLS). Terrain, weather, vegetation,
transmission from other radio devices in the area, and other
factors affect range.
Using the Tone • Using the Beeper • Expected Range Page 15
On selected models
the light on top of
the transmitter is a
push-button that
operates the tone
or the Beeper.

RADIO SIGNAL ISSUES
Modern microprocessor technology virtually eliminates the
possibility that your collar could be unintentionally set off
by someone else with a Tri-Tronics product. Please email our
Customer Service Department at [email protected]
or call us at 1-800-456-4343 with any questions.
FCC COMPLIANCE
The manufacturing of Tri-Tronics Remote Trainers involves
exacting production methods, precise tuning, and stringent
quality control tests. In addition, these products are designed
and manufactured to operate within Federal Communication
Commission (FCC) specifications. It is a violation of FCC rules
to modify your equipment.
Tri-Tronics certifies its products to operate under Part 95
of FCC regulations. Unauthorized modifications to your
equipment could result in its not meeting specifications
and thus violating FCC regulations. Adjustments should only
be performed by technically qualified personnel authorized by
Tri-Tronics. To continue to meet FCC operating specifications,
any replacement of circuit components (including antennas)
must meet Tri-Tronics manufacturing specifications. The
transmitter should only be operated with the Tri-Tronics
antenna installed.
MULTI-DOG MODELS
On two- and three-dog models, the toggle switch next to the
transmitter buttons selects one collar to be “active.” The
active collar is the one that will apply stimulation, make
the tone, or operate the Beeper when the appropriate
transmitter buttons are pressed. The colored spot next
to the transmitter toggle switch indicates which collar
will be active. The chart on pages 4 and 5 shows the
strap colors for the multi-dog models.
When installing collar straps, be sure to install the correct
color strap on each receiver (page 7). Use the strap that
matches the colored dot on the receiver.
Page 16 Remote Trainer

BATTERY CHARGING
Note that battery performance is reduced in cold weather.
Expect to recharge more often.
When to Recharge
When the light on either the collar or transmitter blinks
rapidly, you need to recharge it soon. The amount of time
that batteries have left after the low battery indicator comes
on depends on how heavily you use your Remote Trainer
during training, the temperature (less time remains during
cold weather), and other factors. After you see the low battery
indicator on the collar, you will normally be able to complete
your training session. After you see the low battery indicator
on the transmitter, you will have about two hours left. These
times will be substantially shorter in cold weather.
How to Charge
Charge batteries at room temperature. Do not charge at
temperatures below freezing. Remember that it takes several
hours for cold batteries to come up to room temperature.
Lift the protection covers from the charging jacks. Plug the
charger into the wall outlet and insert charging plugs into the
collar and transmitter jacks. Collar and transmitter lights will
indicate that current is flowing.
After charging, reinstall the protection caps on the collar and
transmitter jacks to keep dirt, debris, and water out of the
charging jacks. Keeping the charging jacks clean ensures that
your chargers make good contact. If the collar charging jack
becomes dirty, clean it as described in the section, “Care and
Cleaning” (page 19). If either jack protection cap becomes
lost or damaged, contact our Customer Service Department
for a replacement.
Battery Charging Page 17
Transmitter charger and
charging jack Collar charger and charging jack

Use only the correct Tri-Tronics charger to charge your
Remote Trainer. Using the wrong type of charger may damage
batteries or the unit itself. Do not charge batteries that are not
installed in a Remote Trainer. Note that you can charge two
collars or two transmitters (or one of each) at the same time
with one charger.
Charging Time
Charge your Remote Trainer for at least 14 hours. It's okay
to use your Remote Trainer before the 14 hours are up; it
will function normally. A 14-hour charge ensures full
battery capacity. You can leave your collar and transmitter on
charge when not in use, if you wish.
Storing a Remote Trainer
Before storing your Remote Trainer for an extended period,
charge it for 14 hours. Thereafter, charge every three months
while the unit is in storage, and charge for 14 hours before
first use.
Replacing the Batteries
Both the transmitter and collar have user-replaceable Nickel
Metal Hydride (NiMH) batteries. Proper battery care will
help ensure maximum life from your batteries. When your
batteries do need to be replaced, you can replace them
yourself with parts obtained from Tri-Tronics.
Don’t open your transmitter or receiver until after you have
received the replacement battery pack. Carefully read the
instructions. Only the battery compartments of your Remote
Trainer are user-accessible. Opening any other part of your
Remote Trainer could cause damage.
While Tri-Tronics Remote Trainer batteries are user-replaceable,
they are not intended to be “field replaceable.” Open battery
compartments only for the purpose of replacing a battery.
Open them away from the field to avoid contamination.
Please contact your local officials to find out whether any
special disposal requirements apply where you live.
Page 18 Remote Trainer