Zoofari ZTPS 6 D1 User manual

P ET GROOMING SET ZTPS 6 D1
PET GROOMING SET
Operation and safety notes
IAN 378747_2107

GB / IE / NI Operation and safety notes Page 5

0.9mm
A
3
5
2
4
1

B
10 11 12 13 14 15
6 7 8 9
C
6
1
D
6

5GB/IE/NI
List of pictograms used....................................................................................................Page 6
Introduction...............................................................................................................................Page 6
Intended use....................................................................................................................................Page 6
Parts description..............................................................................................................................Page 6
Technical data.................................................................................................................................Page 6
Scope of delivery............................................................................................................................Page 6
Safety notices ..........................................................................................................................Page 7
Before use...................................................................................................................................Page 10
Oiling the blades.............................................................................................................................Page 10
Operation ...................................................................................................................................Page 10
Changing the attachments..............................................................................................................Page 10
Setting the trim length .....................................................................................................................Page 10
Trimming fur.....................................................................................................................................Page 11
Use accessories...............................................................................................................................Page 11
Cleaning and care................................................................................................................Page 12
Troubleshooting ....................................................................................................................Page 12
Disposal........................................................................................................................................Page 12
Warranty.....................................................................................................................................Page 13
Warranty claim procedure.............................................................................................................Page 13
Service .............................................................................................................................................Page 13

6 GB/IE/NI
List of pictograms used
Observe the warnings and safety
notices! Use indoors
Alternating current / voltage Safety class II
Hz Hertz (mains frequency) Watts
CE mark indicates conformity with
relevant EU directives applicable
for this product.
UKCA mark indicates conformity with
relevant Great Britain regulations
applicable for this product.
Pet grooming set
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety, use
and disposal. Before using the product, please fa-
miliarise yourself with all of the safety information
and instructions for use. Only use the product as
described and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.
Intended use
The product is suitable for cutting and trimming
pet´s hairs as well as to clipping and grooming the
pet´s claws. The product is only intended for use
indoors in private households and is not intended
for commercial use or for any other use.
Parts description
1Cutting head
2Suspension loop
3Safety lock
4Adjustment switch (trim length)
5ON / OFF switch
6Trimming guide:
⅛(3 mm cutting length)
¼(6 mm cutting length)
⅜(9 mm cutting length)
½(12 mm cutting length)
7Blade cover
8Cleaning brush
9Blade oil
10 Pet hair brush
11 Storage case
12 Claw clipper
13 Fur comb (double-sided)
14 Claw file
15 Fur scissors
Technical data
Input voltage: 220 - 240 V~, 50 - 60 Hz
Rated power: 6.5 W
Protection class: II /
Scope of delivery
1 Pet hair clippers
1 Blade cover
4 Trimming guides
1 Blade oil
1 Cleaning brush
1 Pet hair brush
1 Storage case
1 Claw clipper
1 Fur comb (double-sided)
1 Claw file
1 Fur scissors
1 Instruction manual

7GB/IE/NI
Safety notices
KEEP ALL SAFETY NOTICES
AND INSTRUCTIONS FOR
FUTURE REFERENCE!
DANGER TO LIFE
AND
RISK OF ACCIDENTS
FOR INFANTS AND CHIL-
DREN! Never leave children
unsupervised with the packag-
ing materials. The packaging ma-
terial poses a suffocation
hazard. Children frequently un-
derestimate the dangers. Always
keep children
away from the
packaging material.
CAUTION! This product is not
a toy for children! Children are
not aware of the dangers asso-
ciated with handling electrical
products.
This product can be used by
children aged from 8 years and
a bove and persons with reduced
physical, sensory or mental capa-
bilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the product
in a safe way and understand
the hazards involved. Children
shall not play with the product.
Cleaning and user maintenance
shall not be made by children
without supervision.
The product can be used by
children aged from 3 years
under supervision.
Use only the original accessory
parts for this product.
Check the cutting head 1for
proper function before using
the product.
Never use the product with a
damaged or broken trimming
guide.
The absence of teeth on the
trimming guide can lead to
injury.
Switch the product off before
you put it down.
The product is intended exclu-
sively for the cutting and trim-
ming of animal hair.
Avoid the risk of fatal
injury from electric
shock
Connect the product only to
correctly installed and earthed
mains sockets that are easily
accessible. Ensure that the rating
of the local power supply tallies

8 GB/IE/NI
completely with the details given
on the rating plate of the product.
Ensure that the power cable does
not become damaged. Protect
the power cable from sources
of heat and ensure that it cannot
be damaged.
If the plug and / or supply cord
is damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified per-
sons in order to avoid a hazard.
Keep the prod-
uct dry. The product is suitable
for use only in dry areas.
Do not use this
product near bathtubs, showers,
basins or other vessels containing
water. The proximity of moisture
presents a danger, even when
the product is switched off.
Never immerse the product in
water or other liquids when it
is connected!
Should the
product be dropped into water,
ABSOLUTELY disconnect the plug
from the mains socket before
extracting the product.
After use or when cleaning it,
ALWAYS remove the plug from
the mains power socket. Do not
pull on the power cable directly,
pull the plug.
Never touch
the plug with moist or wet hands,
especially when you plug it into
the socket or pull it out of the
socket.
Never sub-
merge the product or the supply
cord in water or any other liquid
and never rinse this/these under
running water.
Do not use the product while
the animal is being bathed or
when the fur is wet.
For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30mA is advisable
in the electrical circuit supplying
the bathroom. Ask your installer
for advice.
Remove the plug from the socket
- if a malfunction occurs,
- before you clean the product,
- if you have not used the product
for a long time,
- during a thunderstorm and
- after each use.
When doing so, remove the
plug directly from the socket
and do not pull it out using
the supply cord.

9GB/IE/NI
Avoid risk
of injury
Do not change the accessories
while the product is switched on.
Do not use the product if you
detect any kind of visible, external
damage. Never use a damaged
product.
If liquid gets into the product,
check before using the product
once more.
If you notice that the supply
cord, plug, housing or another
part has become damaged, the
product can no longer be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must
always be replaced with original
spare parts. Only by using origi-
nal spare parts can you ensure
that safety requirements are met.
Connect plug to an outlet which
is well within reach.
Never use the product unsu-
pervised and only use it in
accordance with the information
stated on the type plate.
The tips of the attachments are
sharp.
Switch off the product before
attaching or switching the attach-
ments, as well as before cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product on open
wounds, cuts, sunburns and
blisters.
Avoid the danger of
damage to property
Electrical products may pose a
hazard to animals. Animals can
also damage the product. Always
keep animals away from electrical
products when it is not in use.
Protect the product from moisture,
drops of water and splashing
water.
Ensure that the supply cord does
not get stuck in cupboard doors
and that it is not pulled over hot
surfaces. This could damage
the supply cord‘s insulation.
Use the original accessories only.
Do not place the product on
hot surfaces, near hot surfaces
or near an open fire.

10 GB/IE/NI
To prevent impermissible heating
do not cover the plug and the
product during use.
Do not use any corrosive or
abrasive cleaning agents.
Keep the blade oil out of reach
of children. Do not ingest the
blade oil, do not get it into your
eyes. Keep it in a safe place if it
is not being used.
Caution!
It is normal for the product to
have temperature increase during
clipping.
Occasionally turn off the product
while trimming and check to see
if product has possibly gotten too
hot for your pet. If so, let the prod-
uct cool off; otherwise the hot
shaving head may hurt your pet.
As a rough guide, you should
start dipping behind the shoulders
and slowly work your way
backwards and downwards.
Work very carefully when clip-
ping /trimming your pet’s sensi-
tive body parts such as face,
stomach, legs or hindquarters.
Cut in the natural direction of
growth of your pet’s coat. If you
cut against the direction of
growth, your pet’s hair stands
up and is cut shorted as a result.
Before use
Remove all parts from the package.
Oiling the blades
It is recommended that you oil the blades before
first use and after cleaning to guarantee complete
functionality.
Apply one or two drops of blade oil 9be-
tween the blades and distribute them evenly
(see Fig. I).
Wipe away any excess oil using a cloth.
You can also use any acid-free oil such as
sewing machine oil.
Operation
Changing the attachments
(Fig. C‒E)
Remove the blade guard 7from the cutting
head 1.
Place the required trimming guide 6with the
prongs facing upwards on the cutting head 1
and thereby press the flap of the trimming
guide 6down firmly onto the lower metal
edge of the cutting head 1(see Fig. C and D).
Ensure that the trimming guide 6has properly
engaged with “click“ sound before starting to c ut /
trim the fur (see Fig. E1).
Setting the trim length
To set different trim lengths, hold the main body
of the product, press and hold the safety lock 3
and slide the adjustment switch 4into the
desired position (0.9‒1.8mm). The set trim length
will be displayed on adjustment switch 4.
1. Select a shorter trim length: Press and hold
the safety lock 3and slide the adjustment
switch 4upwards. The shortest trim length
is 0.9 mm (see Fig. A).

11GB/IE/NI
2. Select a longer trim length: Press and hold
the safety lock 3and slide the adjustment
switch 4downwards. The longest trim
length is 1.8 mm (see Fig. A).
It is suggested to start with fine adjustment
switch
4
at 1.2 mm to experience the optimal
handling.
Trimming fur
Note: The fur being trimmed should be clean,
dry and untangled.
Carefully comb the fur to disentangle any
potential knots.
Begin by using the longer trimming guides 6
and trim the fur gradually to the desired length.
It is advisable to first trim a small area so as
to test the individual trimming guides 6.
Avoid making sudden movements when trimming.
Switch the product on by sliding the ON /OFF
switch 5to the position with the marking “I“
is shown.
Slowly run the product through the fur. Hold
the product so that the trimming guide 6is as
flat as possible against the animal.
You can graduate the desired trim length of the
trimming guides 6more accurately by sliding
the adjustment switch 4. These gradations
differ by 0.3mm.
Through removal of the trimming guide 6, i.e.
using only the cutting head 1itself, you can
cut clean contours.
After use, switch the product off by sliding
the ON / OFF switch 5to the position with
the marking “0“ is shown.
Example:
Use the trimming guide 3.0 mm 6with
the following settings of adjustment
switch 4(trim length 3.9‒4.8 mm):
On adjustment switch 4:
The shorter trim length (0.9 mm):
short hair (3.9 mm)
Middle trim length (1.2 mm / 1.5 mm):
mid-length hair (4.2 mm / 4.5 mm)
The longer trim length (1.8 mm):
long hair (4.8 mm)
(See the table below for all the length adjustments.)
Trimming guide 6(mm)
Trim length with accurate trim adjust-
ment by adjustment switch 4(mm)
0.9 1.2 1.5 1.8
3.0 3.9 4.2 4.5 4.8
6.0 6.9 7.2 7.5 7.8
9.0 9.9 10.2 10.5 10.8
12.0 12.9 13.2 13.5 13.8
Use accessories
Pet hair brush 10 :
The pet hair brush 10 is suitable for grooming long-
haired dogs and cats after using the fur comb 13 .
Use the pet hair brush 10 regularly to carefully
brush your pet’s dry coat and remove loose and
knotted hair from the undercoat, especially before
cutting. This will prevent the fur from becoming
tangled. Regularly remove hair from the pet hair
brush 10 during use.

12 GB/IE/NI
Storage case 11 :
Keep all accessories of the pet grooming set neatly
and space-saving in the storage case 11 .
Claw clipper 12 :
Use the claw clipper 12 to trim pet claws.
The locking mechanism secures the claw clipper 12
in the closed position. Release the lock when using
the claw clipper 12 .
Note: It is recommended that 2 people shorten
the claws.
Fur comb (double-sided) 13 :
After bathing your pet, first use the coarse side of
the fur comb 13 and then the fine side to comb
your pet’s guard hair and remove knots from the fur.
Claw file 14 :
Use the claw file 14 after you have trimmed your
pet’s claws with the claw clipper 12 to remove
cracks and damage.
Note: It is recommended that 2 people file the
claws.
Fur scissors 15 :
Use the fur scissors 15 to cut your pet’s fur even in
places that are difficult to reach with pet hair clippers.
Cleaning and care
DANGER! ELECTRIC SHOCK!
Before cleaning, remove the plug from the
mains power socket.
CAUTION! PROPERTY DAMAGE!
NEVER submerse the product in water or other
liquids.
Do not use any corrosive or abrasive cleaning
agents.
Clean the housing using a damp cloth and a
mild detergent.
Switch the product off by sliding the ON /OFF
switch 5to the position with the marking “0“
is shown.
Remove the plug from the mains socket.
Remove the trimmer guide 6or the cutting
head 1from the product (see Fig. E2 and F).
Note: Put the blade cover 7on cutting
head 1before removing it from the product.
Note: Never untighten the screws on cutting
head 1.
Wash the trimmer guide 6or the cutting
head 1with running water if necessary.
Dry the trimmer guide 6and cutting head 1.
Remove any remaining bits of hair from the
cutting head 1and product by using the
cleaning brush 8provided (see Fig. G and H).
Apply one or two drops of blade oil 9
between the blades and the moving parts
(see Fig. I).
Adjust the adjustment switch 4to 1.8 mm
after you have finished cleaning the product,
before install back the cutting head 1to the
product with click sound (see Fig. J).
Note: Clean the cutting head 1, trimmer
guide 6after every use.
Troubleshooting
Error Cause Solution
Trimming is
difficult.
Hair may
be stuck
inside the
blades.
Clean the cutting
head 1and the
product and oil it
if necessary.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/ 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.

13GB/IE/NI
Contact your local refuse disposal
authority for more details of how to
dispose of your worn-out product.
To help protect the environment, please
dispose of the product properly when
it has reached the end of its useful life
and not in the household waste. Infor-
mation on collection points and their
opening hours can be obtained from
your local authority.
Warranty
The product has been manufactured to strict qual-
ity guidelines and meticulously examined before
delivery. In the event of product defects you have
legal rights against the retailer of this product. Your
legal rights are not limited in any way by our war-
ranty detailed below.
The warranty for this product is 3 years from the d ate
of purchase. The warranty period begins on the date
of purchase. Please keep the original sales receipt
in a safe location. This document is required as your
proof of purchase.
Should this product show any fault in materials or
manufacture within 3 years from the date of purchase,
we will repair or replace it – at our choice – free
of charge to you. This warranty becomes void if
the product has been damaged, or used or main-
tained improperly.
The warranty applies to defects in material or man-
ufacture. This warranty does not cover product parts
subject to normal wear, thus possibly considered
consumables (e.g. batteries) or for damage to fragile
parts, e.g. switches, rechargeable batteries or
glass parts.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
Please have the till receipt and the item number
(IAN 378747_2107) available as proof of pur-
chase.
You will find the item number on the rating plate,
an engraving on the front page of the instructions
for use (bottom left), or as a sticker on the rear or
bottom of the product.
If functional or other defects occur, please contact
the service department listed either by telephone
or by e-mail.
You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect
is and when it occurred.
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
E-Mail: [email protected]
Service Northern Ireland
Tel.: [phone]
E-Mail: [email protected]

1
2
E
6
G
8
1
1
2
J
1
I
9
1
H
8
F
1

OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model-No.: HG07376-BS
Version: 02 / 2022
Last Information Update: 11 / 2021
Ident.-No.: HG07376-BS112021-GB / IE
IAN 378747_2107