Tripp Lite SR13 Programming manual

Cable Management Kit
2. Attach the bracket #4 to a mounting angle using screw #3 and spacer #2.
3. Thread the hook & loop strip #5 through the bracket #4.
1
1. Place a clip-nut in an appropriate position on the enclosure mounting angle.
SR13
5
4
3
2
1

Required Tools:
Phillips drive screwdriver
Fasteners That Are Required:
2
Parts List
Item Description Qty.
110-32 x 5/8 screw 6
2Nylon Spacer 6
310-32 Clip-Nut 6
SR13
#10-32 x 5/8” Phillips
Pan Head Screw w/Nylon Washer
#10-32 Clip Nut
black nylon spacer
4Bracket 6
5Hook & loop strip 6
Bracket
Hook & loop strip