Tripp Lite PowerVerter Plus Inverter PV750FC User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: PV750FC
PowerVerter® Plus 750W Industrial-Strength Inverter with 2 Outlets
Highlights
12V DC input; 120V AC output; 2 outlets
750 watts continuous output
Peak surge output: OverPower (up to 1 hour) - 1125 watts, Double-Boost (up
to 10 seconds) - 1500 watts
High efficiency power conversion
Automatic overload protection
Description
Harness your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 750 watts
of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Supplies up to 1500 watts of peak surge power, providing the
startup power needed for power tools and equipment. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a
set of high current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors and
other inductive loads with high-current startup needs.
PowerVerter Plus Inverters accommodate "peak surge" demands by delivering more output power than their continuous rating. Compare the
"Continuous" and "Peak Surge" wattage ratings, and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle
equipment start up and motor cycling requirements. The DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds,
providing the extra power needed to cold start heavy-duty tools and equipment. The OverPower feature delivers up to 150% of the continuous
output for up to 1 hour.
Applications
Ideal for power tools, pumps, fans, desktop computer systems, laptops, portable electronics, battery chargers for cell phones, pagers,
notepads and games, full size TV-VCR & stereo systems, camcorders, lighting and other AC applications under 750 watts continuous/1500
watts peak.
Package Includes
PV750FC inverter
Instruction manual
Features
Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
750 watts continuous output power
Peak surge output: OverPower (up to 1 hour) - 1125 watts, Double-Boost (up to 10 seconds) - 1500 watts
2 outlets; DC input terminals for 12V battery connection
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong run time

Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
DC fusing protects inverter against overload
RJ45 port allows connection of APS/PowerVerter Remote Switch (model APSRM4)
Specifications
OUTPUT
Frequency
compatibility
60 Hz
Output watts 750
Continuous output
capacity (watts)
750
Peak output capacity
(watts)
1500
Output nominal
voltage
120V
Output voltage
regulation
Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection 8A
Outlet quantity / type 2 AC outlets
INPUT
Recommended
Electrical Service
Requires 12V DC input source capable of delivering 72A for the required duration (when used at full capacity). For
automotive applications, professional hardwire installation with 200A battery system fusing is recommended.
Maximum input amps
/ watts
Full continuous load - 72A at 12V DC, No load - 2.2A at 12V DC
Input connection type Set of 2 DC input terminals
Input cord length
details
User supplies cabling. 4 gauge or larger recommended.
Voltage compatibility
(VDC)
12
BATTERY
DC system voltage
(VDC)
12
LEDS ALARMS & SWITCHES
Switches 3 position on/off/remote switch enables simple on/off power control plus "remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
PHYSICAL
Shipping weight (lbs) 18
Shipping weight (kg) 8.2
Cooling method Variable-speed fan
Unit Dimensions
(HWD/in)
7 x 8.75 x 9

Unit Dimensions
(HWD/cm)
17.78 x 22.23 x 22.86
Shipping Dimensions
(HWD/in)
12.5 x 11 x 10.75
Shipping Dimensions
(HWD/cm)
31.75 x 27.94 x 27.31
Unit weight (lbs) 16
Unit weight (kg) 7.3
Material of
construction
Polycarbonate
Receptacle Color BLACK
Style Heavy-duty
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
SPECIAL FEATURES
Appearance Black color
Remote control
capability
Yes
CERTIFICATIONS
Certifications Complies with RoHS (Restriction of Hazardous Substances Directive)
WARRANTY
Product Warranty
Period (Worldwide)
1-year limited warranty
Related Items
Optional Products
Product Type Related Model Description Qty.
Inverter Accessories APSRM4 Remote Control Module - for Tripp Lite Inverters and Inverter/Chargers 1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3477.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.