Tripp Lite PowerVerter APS Inverter/Charger APS1250F User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: APS1250F
PowerVerter APS Inverter/Charger with Fast Auto-Transfer Switching
Highlights
12V DC or 120V AC input; 120V AC output; 2 outlets
1250 watts continuous, 1875 watts OverPower and 2500 watts DoubleBoost
inverter output
3 stage, 30 amp selectable wet/dry cell automatic battery charger
Faster Auto Transfer Switching option for battery backup / UPS operation
Reliability enhanced large-transformer design with protected DC wiring
terminals
Description
Tripp Lite's APS1250F DC-to-AC inverter with faster automatic line-to-battery transfer and integrated charging system serves as an extended run
UPS, a standalone power source or an automotive inverter. Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets from any 12V
battery or automotive DC source. OverPower inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and
DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold
start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected
equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage
fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple
installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during
battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current
needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous
status information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly
adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel/SLA battery types and selectable line to battery
power transfer voltages.
Applications
Versatile inverter/charger system with faster auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking,
conversion vans and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and
as an uninterruptible power supply (UPS) for items compatible with a 8.33 millisecond (1/2 cycle) transfer time.
Package Includes
APS1250F Inverter/Charger
Owner's manual with warranty information
Features

APS1250F serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
Fast 8.33 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations
for equipment compatible with a 1/2 cycle transfer time
1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode
DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions (For
best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal
DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage)
3 stage, automatic 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Two built-in NEMA 5-15R output receptacles pass 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to
maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dip switches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during
overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Resettable 8A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from
load and temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires optional APSRM4 switch accessory). Optional APSRM4
accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged.
Specifications
OVERVIEW
Intended Application Emergency Home Power (Sump Pumps, Furnice Motors, Lighting, Phones & Computers)
OUTPUT
Frequency
compatibility
60 Hz
Output watts 1250
Continuous output
capacity (watts)
1250
Peak output capacity
(watts)
2500
Output nominal
voltage
120V
Output voltage
regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection Includes 8A input breaker dedicated to the charging system and 12A output breaker for AC output loads
Outlet quantity / type 2 AC outlets
INPUT
Recommended
Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 127A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A
120V AC recommended

Maximum input
amps / watts
DC INPUT: Full continuous load - 127A at 12V DC. AC INPUT: 12 amps at 120VAC with full inverter and charger load
(6.3A max charger-only)
Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
Voltage compatibility
(VAC)
120
Voltage compatibility
(VDC)
12
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage
(VDC)
12
Battery Pack
Accessory (optional)
98-121 sealed lead acid battery (optional)
Battery recharge rate 30A
LEDS ALARMS & SWITCHES
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in
inverter mode. In AC uninterrupt
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
SURGE / NOISE SUPPRESSION
AC suppression
joule rating
450
PHYSICAL
Shipping weight (lbs) 18
Shipping weight (kg) 8.2
Cooling method Multi-speed fan
Unit Dimensions
(HWD/in)
7 x 8.75 x 9
Unit Dimensions
(HWD/cm)
17.78 x 22.23 x 22.86
Shipping
Dimensions (HWD/in)
12.5 x 11 x 10.75
Shipping
Dimensions
(HWD/cm)
31.75 x 27.94 x 27.31
Unit weight (lbs) 16
Unit weight (kg) 7.3
Material of
construction
Polycarbonate
Style Heavy-duty with built-in battery charger
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL

Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to battery
mode
8.33 milliseconds (1/2 cycle; typical - compatible with many computers, servers and networking equipment - verify
transfer time compatibility of loads for UPS applications)
Low voltage transfer
to battery power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95,
105V - see manual)
High voltage transfer
to battery power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to
145 - see manual)
SPECIAL FEATURES
Remote control
capability
Yes
WARRANTY
Product Warranty
Period (Worldwide)
1-year limited warranty
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3866.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.