Tripp Lite Console Converter For SUN B011-000 User manual

- 5 -- 4 -
e
help sc F1 F2
undo cut copy paste
F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
numlk
clear
=/*
enter
0
123
456
78
9
-
+
t
stop again
undo
copy
paste
cut
props
front
open
find
ab
caps
lock
shift s
alt
graph
com-
pose
hift
control alt
enter
back
space
|
\
ins
help home
page
up
page
down
del
end
~
‘
!@#$%^&* ( )_+
1234567890
-=
}{
[]
"
:
’
;
?><
/
,
XCVBNM
Z
QWE R T Y U
I
OP
ASDFG
HJKL
÷
SUN Keyboard
PS/2 104 Key Keyboard Emulation Keys
H
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
1234
Alt
Alt
graph com- pose
Ctrl Ctrl
Win Keyboard
RCtrl F1
RCtrl F2
RCtrl F3
RCtrl F4
RCtrl F5
RCtrl F6
RCtrl F7
RCtrl F8
RCtrl F9
RCtrl F10
RCtrl 1
RCtrl 2
RCtrl 3
RCtrl 4
RCtrl H
RWIN
LWIN
WIN CMD
RALT
Stop
Again
Props
Undo
Front
Copy
Open
Paste
Find
Cut
-
+
Help
Right
Left
Compose
Alt Grapher
Sun Keyboard
The PS/2 104 key keyboard can
emulate the functions of the SUN
keyboard when the Right Control key
(RCtrl) is used in conjunction with the
keys highlighted in the diagram at the
left. The corresponding functions are
shown in the table above.
PREVENTING RADIO & TV INTERFERENCE
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instruction manual, may cause interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: reorient or
relocate the receiving antenna; increase the separation between the
equipment and receiver; connect the equipment into an outlet on a circuit
different from that which the receiver is connected; consult the dealer or an
experienced radio/television technician for help. The user must use
shielded cables and connectors with this product. Any changes or
modifications to this product not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
1-YEAR LIMITED WARRANTY
TRIPP LITE warrants its products to be free from defects in materials and workmanship
for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation
under this warranty is limited to repairing or replacing (at its sole option) any such
defective products. To obtain service under this warranty, you must obtain a Returned
Material Authorization(RMA) number from TRIPP LITE or an authorized TRIPPLITE
service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE
service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment whichhas been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, 1TRIPP LITE MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. Somestates do not permitlimitation or
exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s)
may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL 1TRIPP LITE BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs,
such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of
software, loss of data, costs of substitutes, claims by third parties,or otherwise.
The policy of TRIPP LITE is one of continuous improvement. Specifications are subject
to change without notice.
PAPE-1111-101
Tripp Lite World Headquarters
1111 W. 35th Street, Chicago, IL 60609 USA
[phone], www.tripplite.com
User’s Manual
Console Converter
For SUN
Model #: B011-000
NOTE: Follow these installation and operating procedures to ensure correct performance and to
prevent damage to this unit or to its connected devices.
Copyright © 2001 Tripp Lite. All rights reserved. All trademarks are the property of their respective
owners. Technical specifications are subject to change without notice.

Overview
The B011-000 PS/2 to SUN interface converter allows you to
control a SUN workstation from a PS/2 keyboard, PS/2 mouse
and PC monitor by translating their signals to SUN keyboard,
mouse, and monitor signals. In addition, the B011-000 fully sup-
ports Tripp Lite’s existing KVM switches, so you can use them to
easily integrate SUN workstations into your KVM network.
Features
MHot Plug Support for PS/2 Keyboard and Mouse
MDIP Switch Selectable Display Resolution
MDIP Switch Selectable Screen Saver
MDIP Switch Selectable Mouse Speed
MNo Power Adapter Necessary
Installation
1. Plug the cables from your PS/2 keyboard and PS/2 mouse
into the mini-DIN 6 pin connectors on the Console side of the
B011-000.
Note: 1. The mouse used with a SUN workstation is a three
button mouse. Use a three button PS/2 mouse to
fully emulate its functions.
2. If connecting to a KVM switch, use a PS/2 KVM
cable kit to connect the B011-000 to your switch.
2. Plug the cable from your PC monitor into the HD15 connector
on the Console side of the B011-000.
3. Use a 13W3 male-to-male cable to connect the SUN
workstation’s Video Out port to the B011-000’s Video In port.
4. Use an MD8 male-to-male and PIN to PIN cable to connect
the SUN workstation’s keyboard and mouse port to the
B011-000’s keyboard and mouse port.
DIP Switch Settings
Select the video resolution, the amount of idle time before the
screen saver comes on, and the mouse speed with the DIP
switch as follows:
Video Resolution SW1 SW2 SW3
1152 x 900 (76Hz) ON OFF OFF
1152 x 900 (76Hz) ON ON OFF
1152 x 900 (66Hz) OFF OFF ON
1280 x 1024 (76Hz) ON OFF ON
1600 x 1280 (76Hz) OFF ON ON
Screen Saver Time Out SW4 SW5 SW6
5 Minutes OFF ON ON
10 Minutes OFF OFF ON
20 Minutes OFF ON OFF
30 Minutes OFF OFF OFF
Monitor Always ON ON X X
Mouse Speed SW7
High ON
Normal OFF
LEDs
There are three LEDs to indicate operating status:
MThe ACTIVE LED indicates that PS/2 keyboard or mouse
data is being transmitted.
MThe EXTEND LED indicates that the Right Control key (RCtrl)
is active.
MThe COMPOSE LED indicates that the Compose key is latched.
Specifications
Function Specification
Power Consumption 50mA (max)
Connectors Video In 13W3 Female
Video Out HD15 Female
Sun KB & Mouse Mini DIN 8 Pin Female
PS/2 KB Mini DIN 6 Pin Female
PS/2 Mouse Mini DIN 6 Pin Female
LEDs Active Green
Extend Yellow
Compose Yellow
DIP Switch 8 bits
Operating Temperature 5 ~ 40oC
Storage Temperature -20 ~ 60oC
Humidity 0 ~ 80% (RH)
Housing Plastic
Weight 150g
Dimensions (L x W x H) 100 x 80 x 36 mm
- 2 -- 1 - - 3 -
SUN Station
B011-000B010-000
KVM Switch
MAC
PC
B011-000
SUN Station
LEDs
MD8
13W3
DIP SW