Triton Kunai User manual

User Guide
[ENGLISH/06-13]

[2]
Package Contents .................................................. 3
Connecting the Microphone ......................................... 4
In-line Controls .................................................... 6
Speaker Tags ...................................................... 7
Connect To
Xbox 360®...................................................... 8
PlayStation®3 .................................................. 12
Wii U GamePadTM / Mobile Devices ............................... 16
Warranty ......................................................... 18
Technical Support ................................................. 19
Table of Contents

[3]
Package Contents
Quick Start Guide
Kunai Headset
In-line Remote
Removable Microphone
Xbox LIVE®Communication Cables
RCA Connection Cable
Analog Audio Adapter

[4]
Connecting the Microphone
1Line up the arrows on the microphone and the headset.

[5]
Connecting the Microphone
2Insert the microphone into the port on the left earcup of the headset.
Firmly push it into place, and then twist it clockwise to lock it in place.
3Reverse the above steps to remove the microphone.

[6]
In-line Controls
Game Audio Volume: Use
to adjust the volume of the
game audio.
Voice Communication Volume:
Use to adjust the volume of the
voices of other players.
Xbox LIVE Communication
Cable Port
Mic Mute: Slide the mic mute switch
so that others cannot hear you. The
orange area behind the switch will
show when the mic is muted.

[7]
Speaker Tags
1The speaker tags are held in place with magnets. Remove them by pulling
on the slots located at the top of the speaker plates.
2To replace the speaker tags, line up the tabs on the speaker tag with the
holes at the bottom of the earcup, and then tilt the speaker tag forward so
that the magnets hold it in place.
Replacement and customized speaker tags are available at trittonaudio.com

[8]
Xbox 360 – HDMI
1Connect the USB Cable to a USB port on the console.
2Connect the RCA connection cable to the console Analog Audio Adapter.
3Connect the Analog Audio Adapter to the AV port on the console.
4Plug the headset into the in-line controller.
5Be sure to connect the Xbox LIVE communication cable in the proper order:
A. Connect Xbox LIVE cable into Xbox LIVE port on
the in-line controller.
B. Connect puck side of Xbox LIVE cable into
Xbox 360-compatible controller.

[9]
Xbox 360 – HDMI
* Not Included
1
2
3
4
5
A.
B.

[10]
Xbox 360 – Component/Composite/VGA
1Connect the USB Cable to a USB port on the console.
2Connect the RCA connection cable to the console AV cable.
3Plug the headset into the in-line controller.
4Be sure to connect the Xbox LIVE communication cable in the proper order:
A. Connect Xbox LIVE cable into Xbox LIVE port on
the in-line controller.
B. Connect puck side of Xbox LIVE cable into
Xbox 360-compatible controller.