TUDOR CLASSIC DATE 22010 User manual

CLASSIC
WATCHES

AB C D
SETTINGS
CLASSIC WATCHES

A
B
C
SETTINGS
ADVISOR

SCREWED-DOWN POSITION [position A]
Advisor [crown not screwed-down]
Your TUDOR watch is equipped with a screw-down
crown. Once this is fully screwed down against the case,
your watch is guaranteed waterproof.

MANUAL WINDING [position B]
Advisor [position A]
Awatch equipped with a self-winding mechanical
movement is wound automatically by wrist movements
alone. To ensure optimum winding, wear your watch
daily.
Before you rst use the watch or if it has stopped, you
will need to wind it manually by unscrewing the crown
and then turning it clockwise; the other direction
isinactive.

DATE-SETTING [position C]
Advisor [position B]
In order to adjust the time, unscrew the crown and pull
itout to the last notch.
> For Advisor, pull the crown out to the rst notch.
Then turn it clockwise until the desired date appears in
the window. The date is corrected when the hands pass
midnight. During this operation, your watch will keep
running.
> For Advisor, North Flag and Glamour Double Date:
Turn the crown counterclockwise.

You are advised not to correct the date between 20:00
and 02:00. If the date is corrected between these times,
the date will not change at midnight, but 24 hours later.
In order to adjust the day of the week, unscrew and
pull the crown out to the second notch. Then turn it
counterclockwise until the desired day appears in the
window.

TIME-SETTING [position D]
Advisor [position C]
In order to adjust the time, unscrew the crown and pull it
out to the last notch. Then turn it in either direction until
the hands indicate the correct time. The small second
hand is stopped during this operation, allowing the time
to be set accurately. To synchronize the small second
hand and minute hand, the ne adjustment must be
performed in a counterclockwise direction.

> For the models with date, if the watch has stopped,
take care not to confuse midday and midnight during
this operation. Move the hands forward to 12 o’clock;
if the date changes, then it is midnight.
> For Advisor, in a time-setting operation, the hour
hand drags the alarm hand counterclockwise when
they are superposed.

B
A
C
ALARM FUNCTION
ON ADVISOR

BEFORE ACTIVATING THE ALARM,
[position B]
1
2
3
you will need to wind it manually by pulling
out the alarm-setting crown at the rst notch.
Then turn it clockwise. It is important not
tooverwind the crown.
Once the mechanism is fully wound, the alarm
power-reserve indicator is at the maximum
level which corresponds to an approximately
10-second ring.

IN ORDER TO ADJUST THE ALARM TIME,
[position C]
pull out the alarm-setting mechanism to the last notch.
Then turn it clockwise until the alarm hand indicates the
desired time.

ACTIVATING THE ALARM
[pusher at 8 o’clock]
The alarm is activated or deactivated by simply pressing
the alarm activating/deactivating pusher. Its status is
indicated by the ON/OFF mention at 9 o’clock.

RECOMMENDATIONS
Bronze: Your Black Bay Bronze is designed in bronze,
in this case a high-performance aluminum bronze alloy,
which guarantees the development of a subtle and unique
patina to match its user’s habits.
Cleaning: Use a microber cloth and wash the metal,
rubber, fabric bracelets and waterproof cases from time
to time with a so brush and soapy water. We recommend
that you do not use abrasive or corrosive products
(solvents, detergents, perfume, etc.).

Guarantee: Refer to the guarantee manual supplied
with your watch.
Leather: To preserve your leather strap, we recommend
protecting it from water and moisture.
PVD: Your Black Bay Dark is nished with a black coating
obtained using a Physical Vapor Deposition (PVD)
process. Although the coating is extremely resistant,
regular wear and tear can cause this decorative layer to
deteriorate over time. The warranty does not cover
this type of aesthetic wear.

Salt water: Always rinse your watch with fresh water.
Screw-down winding crown: Aer each operation,
remember to push the crown back in and screw it back
down carefully against the case, in order to preserve
your watch’s waterproofness.

Service: Each TUDOR watch is a complex precision
mechanism and, as such, requires periodic servicing and
maintenance to guarantee optimum performance. Expert
TUDOR servicing can be carried out via any of the Ocial
Jewelers and Service Centers in the extensive ROLEX or
TUDOR service network. Visit TUDORWATCH.COM to view
the list of Ocial TUDOR Jewelers and Service Centers in
your area.
Strap: Only Ocial TUDOR Jewelers are authorized to
change the watch strap.

REFERENCE MODEL CALIBER POWER RESERVE WATERPROOFNESS
N NORTH FLAG MT  h  m
 HERITAGE RANGER   h  m
/ HERITAGE BLACK BAY /   h  m
T/TC/TN HERITAGE ADVISOR   h  m
/ GLAMOUR DOUBLE DATE   h  m
/ GLAMOUR DATE+DAY   h  m
/ GLAMOUR DATE   h  m
/ GLAMOUR DATE   h  m

REFERENCE MODEL CALIBER POWER RESERVE WATERPROOFNESS
N NORTH FLAG MT  h  m
 HERITAGE RANGER   h  m
/ HERITAGE BLACK BAY /   h  m
T/TC/TN HERITAGE ADVISOR   h  m
/ GLAMOUR DOUBLE DATE   h  m
/ GLAMOUR DATE+DAY   h  m
/ GLAMOUR DATE   h  m
/ GLAMOUR DATE   h  m

REFERENCE MODEL CALIBER POWER RESERVE WATERPROOFNESS
53000/53003 GLAMOUR DATE 2671 38 h 100 m
53020/53023 GLAMOUR DATE 2671 38 h 100 m
51000/51003 GLAMOUR DATE 2671 38 h 100 m
35800 CLAIR DE ROSE 2824 38 h 100 m
35500/35200 CLAIR DE ROSE 2671 38 h 100 m
23010/23013 CLASSIC DATE+DAY 2834 38 h 100 m
21010/21013 CLASSIC DATE 2824 38 h 100 m
21020/21023 CLASSIC DATE 2824 38 h 100 m