TUDOR HERITAGE CHRONO User manual

TUDOR HERITAGE CHRONO

MDE_TUDOR_2013_HeritageChrono_US.indd 1 22.05.14 11:47

MDE_TUDOR_2013_HeritageChrono_US.indd 2 22.05.14 11:47

MDE_TUDOR_2013_HeritageChrono_US.indd 1 22.05.14 11:47

  
MDE_TUDOR_2013_HeritageChrono_US.indd 2 22.05.14 11:47

GENERAL INFORMATION 
WATERPROOFNESS 
CHRONO 
MAINTENANCE & TUDOR WARRANTY 
WORLDWIDE SERVICE NETWORK 
CONTENTS
3
MDE_TUDOR_2013_HeritageChrono_US.indd 3 22.05.14 11:47

MDE_TUDOR_2013_HeritageChrono_US.indd 4 22.05.14 11:47

 
All TUDOR models bear the Swiss Made quality label.
They are equipped with a self-winding mechanical movement,
and feature a synthetic sapphire crystal and a screw-down winding
crown, to ensure perfect waterproofness.
To ensure that your TUDOR watch remains in perfect working order
for many years, please read this document carefully.
 
5
MDE_TUDOR_2013_HeritageChrono_US.indd 5 22.05.14 11:47

MDE_TUDOR_2013_HeritageChrono_US.indd 6 22.05.14 11:47

TUDOR HERITAGE  m m m m m
CHRONO
 ft  ft  ft  ft , ft

 
7
MDE_TUDOR_2013_HeritageChrono_US.indd 7 22.05.14 11:47


Unscrew and pull out

A. Screwed-down position
B. Manual winding
C. Date-setting
D. Time-setting
 
ABC D



 
8
MDE_TUDOR_2013_HeritageChrono_US.indd 8 22.05.14 11:47


Ø 42 mm, TUDOR calibre 2892 with additional mechanism for
the chronograph function, waterproof to 150 meters (500 feet).
45-minute chronograph, date (window-type display), small seconds
hand, 12-hour graduated bidirectional rotatable bezel for second
time-zone display, crown guard, screw-down pushers.
Key
1. Hour hand
2. Minute hand
3. Small seconds hand
4. Date window
5. Winding crown
A. Screwed-down position
B. Manual winding
C. Date-setting
D. Time-setting
 
9
MDE_TUDOR_2013_HeritageChrono_US.indd 9 22.05.14 11:47


SCREWED-DOWN POSITION [position A]
Your TUDOR watch is equipped with a screw-down crown.
Once this is fully screwed down against the case, your watch is
guaranteed waterproof.
MANUAL WINDING [position B]
A watch equipped with a self-winding mechanical movement is wound
automatically by wrist movements alone. To ensure optimum winding,
wear your watch daily.
 
10
MDE_TUDOR_2013_HeritageChrono_US.indd 10 22.05.14 11:47


Before you first use the watch or if it has stopped, you will need to wind
it manually by unscrewing the crown and turning it clockwise; the other
direction is inactive. After performing the operation, gently press in the
crown while turning it gradually clockwise, and screw it down carefully
against the case in order to preserve your watch’s waterproofness.
Once wound, and without being worn, the Tudor Heritage Chrono has
a power reserve of approximately 42 hours.
 
11
MDE_TUDOR_2013_HeritageChrono_US.indd 11 22.05.14 11:47


DATE-SETTING [position C]
In order to adjust the date, unscrew the crown and pull it out to the
second notch. Then turn it counterclockwise until the desired date
appears in the window. The date is adjusted when the hands pass
midnight. During this operation, your watch will keep running.
You are advised not to correct the date between 20:00 and 02:00.
If the date is corrected between these times, the date will not change
at midnight, but 24 hours later.
 
12
MDE_TUDOR_2013_HeritageChrono_US.indd 12 22.05.14 11:47


TIME-SETTING [position D]
In order to adjust the time, unscrew the crown and pull it out to the
last notch. Then turn it in either direction until the hands indicate the
correct time. The small seconds hand is stopped during this operation.
To synchronize the small seconds hand and minute hand, the fine
adjustment must be performed in a counterclockwise direction.
If the watch has stopped, take care not to confuse midday and midnight
during this operation. Move the hands forward to 12 o’clock; if the date
changes, then it is midnight.
After each operation, remember to push the crown back in and screw
it back down carefully against the case, in order to preserve your
watch’s waterproofness.
 
13
MDE_TUDOR_2013_HeritageChrono_US.indd 13 22.05.14 11:47


 





 
14
MDE_TUDOR_2013_HeritageChrono_US.indd 14 22.05.14 11:47


Key
1. Center seconds hand (chronograph seconds hand)
2. 45-minute counter (chronograph minute hand)
3. Chronograph start/stop pusher
4. Chronograph reset pusher
5. Bidirectional rotatable bezel
 
15
MDE_TUDOR_2013_HeritageChrono_US.indd 15 22.05.14 11:47


CHRONOGRAPH FUNCTION
The chronograph function enables you to measure times to fractions
of a second, thanks to the center seconds hand. To measure longer
intervals, this chronograph has an additional 45-minute counter.
Pressing the start/stop pusher a first time will start the chronograph.
Pressing it again will stop the chronograph, and pressing a third
time will start it again. In this way you can measure several times
in succession.
To reset the chronograph counter, press the reset pusher; the
chronograph will be ready for use again. Resetting is only possible
when the chronograph has stopped.
To be enabled for use, the start/stop and reset pushers must be
unscrewed; lock the pushers after use.
 
16
MDE_TUDOR_2013_HeritageChrono_US.indd 16 22.05.14 11:47