TUDOR HERITAGE BLACK BAY 36 User manual

TUDOR HERITAGE BLACK BAY 36

    

GENERAL INFORMATION 
WATERPROOFNESS 
BLACK BAY  
MAINTENANCE 
WORLDWIDE SERVICE NETWORK 
CONTENTS
3

 
All TUDOR watches are entirely manufactured in Switzerland.
Equipped with a self-winding mechanical movement, they are fitted
with a scratch-resistant sapphire crystal and a screw-down winding
crown for perfect waterproofness.
To ensure that your watch remains in perfect working order for many
years, please read this document carefully.
5

TUDOR HERITAGE  m m m m m
BLACK BAY 
 ft  ft  ft  ft , ft

7

  
Unscrew and
then pull out

A. Screwed-down position
B. Manual winding
C. Time setting




ABC
8

  
Ø 36 mm, TUDOR calibre 2824, waterproof to 150 meters.
Key
1. Hour hand
2. Minute hand
3. Seconds hand
4. Winding crown
9

  
SCREWED-DOWN POSITION (position A)
Your TUDOR watch is equipped with a screw-down crown.
Once this is fully screwed down against the case, your watch
is guaranteed waterproof.
MANUAL WINDING (position B)
A watch equipped with a self-winding mechanical movement is wound
automatically by wrist movements alone. To ensure optimum winding,
wear your watch daily.
10

  
Before you first use the watch or if it has stopped, you will need to wind
it manually by unscrewing the crown and then turning it clockwise;
the other direction is inactive. After performing the operation, gently
press in the crown while turning it gradually clockwise, and screw
it down carefully against the case in order to preserve your watch’s
waterproofness.
Once wound, and without being worn, the Black Bay36 has a power
reserve of approximately 38 hours.
11

  
TIME SETTING (position C)
In order to adjust the time, unscrew the crown and pull it out to the
last notch. Then turn it in either direction until the hands indicate
the correct time. The seconds hand is stopped during this operation,
allowing the time to be set accurately.
After each operation, remember to push the crown back in and
screw it back down carefully against the case, in order to preserve
your watch’s waterproofness.
12

  
ADJUSTING THE FABRIC STRAP
The Black Bay36 model comes with an additional fabric strap.
The length of the fabric strap can be adjusted by sliding it through
the buckle and loops.
Only Ocial TUDOR Jewelers are authorized to change the watch strap.
13

  
SHORTENING THE FABRIC STRAP
Feed the upper strap through the buckle
Push the strap down and under the buckle
Push the loop up against the buckle
Pull on both straps






14

  
LENGTHENING THE FABRIC STRAP
Feed both straps through the buckle
Push the loop down and under the buckle
Push only the upper strap up through the buckle
Pull the upper strap






15


Thanks to TUDOR’s expertise, your watch will require very little
day-to-day care.
However, you can maintain the shine on your watch and its metal
bracelet by using a microfiber cloth. You can also wash it from time
to time using a soft brush and soapy water.
Before performing these operations, check that the crown is properly
screwed down against the case, in order to guarantee your watch’s
waterproofness.
To help preserve your leather or fabric strap, we recommend protecting
it from water and moisture.
16