TUFLOC TufBox Light User manual

INSTALLATION INSTRUCTIONS
TufBox Light
Congratulations and thank you for your recent purchase of this TUFLOC product. Esmet has designed and
manufactured the highest quality products for over sixty-five years and we are confident that you will be a
satisfied Tufloc product owner.
This manual includes simple step-by-step instructions to install and operate your TufBox Light. Please contact
the factory if you have any installation or operation questions.
6/18
1406 Fifth Street, SW • Canton, Ohio 44702 • USA1-800-321-0870 • 330-452-9132 • Fax [phone]
[email protected] • Tufloc.com

TufBox Light Installation
•The interior light for the TufBox is supplied with double-sided tape which will allow the light to be placed
almost anywhere inside the drawer.
•With the light turned on (preferably in a dark environment) determine the best mounting location inside
the TufBox. Consider the following:
- This location will vary based on where the user wants the light directed.
- Contents inside of the TufBox such as dividers and equipment should also be a consideration when
determining this location.
- The best location to illuminate the entire box is located directly in the center on the underside of the
cabinet.
- If drawer light is not centered on the cabinet there will not be enough clearance for the drawer
to work properly.
•Prior to installation, make sure there is enough space to be able to slide the light off the back plate
to replace the batteries.
•Remove coating from one side of the double-sided tape and adhere it to the back plate of the light.
• Remove coating from other side of double-sided tape and secure light to box.
1406 Fifth Street, SW • Canton, Ohio 44702 • USA1-800-321-0870 • 330-452-9132 • Fax [phone]
[email protected] • Tufloc.com