TUHOME Furniture BIANCO ELW5689 User manual

BIANCO COMPUTER DESK
Escritorio Bianco
Alto: 75 cm
Ancho: 120 cm
Fondo: 55 cm
Height: 29,52 in
Width: 47,24 in
Depth: 21,65 in
REF./SKU. ELW5689 - ELZ5690 - ELI5691
LOT N°
ASSEMBLY INSTRUCTIONS
INSTRUCCIONES DE ENSAMBLEFURNITURE
IF ANY PARTS ARE BROKEN OR MISSING PLEASE
CONTACT US AT: 1-888-391-01-66 /
[e-mail]
OUR CUSTOMER SERVICE TEAM WILL PROVIDE
YOU HELP TO RESOLVE ANY ISSUES IMMEDIATELY

!
WARNING
!
IMPORTANT
RECOMMENDATIONS RECOMENDACIONES IMPORTANTES
No pintar el mueble.
El mueble debe ser usado únicamente en interiores,
no exponer al sol directo.
Limpiar los herrajes metálicos con un paño seco.
NO sobrecargar el mueble (ver las cargas sugeridas).
No golpear ni martillar el mueble (solo cuando se
indique).
Limpiar con un paño ligeramente húmedo,
usar jabones suaves.
No arrastre el mueble, levántelo entre dos personas.
Evite el contacto directo con el agua, el fuego o la
exposición a fuentes de calor.
Never allow children to climb or manipulate
the cabinet, furniture tip over can cause
serious injuries or death.
ADVERTENCIA
!
Nunca permita que los niños escalen o
manipulen el mueble, la caída de este
puede provocar lesiones graves o la muerte.
Do not paint the cabinet.
The cabinet MUST be used exclusively indoors,
do not expose to direct sun.
Clean metallic hardware with a dry cloth.
Do not hit or hammer the cabinet (just when
indicated).
Clean with a slightly damp cloth, use gentle soaps.
Do not drag, lift and move between two people.
Avoid direct contact with water, fire or exposure
to heat sources.
Do NOT overload the cabinet (see suggested loads).
FURNITURE
Page 2

REQUIRED TOOLS* HERRAMIENTAS NECESARIAS*
Page 3
*Not included, and not shown actual size. *No incluidas y no se muestran en tamaño real.
INDEX ÍNDICE
Assembly Hardware
Assembly Parts
Suggested Loads
Assembly Recommendations
Assembly Steps
Warranty
4
5
6
6
7-16
17
Herrajes para Armado
Piezas de Armado
Cargas Sugeridas
Recomendaciones de Ensamble
Pasos de Armado
Garantía
4
5
6
6
7-16
17

x47
Minifix Cams
Minifix
Spreading Bolt
Perno Minifix
x47
x54
Wood Dowel
Tarugo
x1
Glue
Pegante
ASSEMBLY HARDWARE HERRAJES PARA ARMADO
Page 4
Please check that the hardware content is correct.
If any item is missing, please call to our customer
service line.
Hardware items are NOT shown actual size. Los herrajes no se muestran en el tamaño real.
Compruebe que el contenido de los herrajes sea
el correcto. En caso de que falte alguna pieza, por
favor llame a nuestra línea de atención al cliente.
Cover Caps
Tapa Adhesiva
Minifix
x47
x24
Sheet Screw
Tornillo lamina
9/16
x12
Drywall Screw
Tornillo Ensamble
2"
x3
Handle Screw
Tornillo Manija
x3
Drawer Slide
Riel Importado
x3
Cabinet Knob
Manija Botón
x6
Drywall Screw
Tornillo Ensamble
1" 1/4

ASSEMBLY PARTS PIEZAS DE ARMADO
A - x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
H - x1
I - x1
J - x1
Page 5
A
B
C
D
E
F
G
H
I
J
K
L
M
N
OQ
R
FC
O
O
P
P
P
Q
Q
R
R
FC
FC
O - x3
P - x3
Q - x3
R - x3
K - x1
L - x1
M - x1
N - x1
FC - x3

MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS
ASSEMBLY
RECOMMENDATIONS RECOMENDACIONES DE ENSAMBLE
Page 6
Two people are recommended to assemble
the product.
Assemble the cabinet on a flat, smooth
surface, preferably on a carpeted floor
or the carton box of the product.
Carefully read the assembly instructions
and identify every wood and hardware
part before start assemblying the cabinet.
Ensamble el mueble entre dos personas.
Ensamble el mueble sobre una superficie
plana y lisa, preferiblemente sobre un
tapete o el cartón de la caja
Lea cuidadosamente las instrucciones e
identifique todas las piezas y herrajes
antes de empezar a armar el mueble.
22 lb 10 Kg
44 lb 20 Kg

1
2
Page 7
SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O
SOBRE UNA SUPERFICIE LISA, PARA NO RAYARLO /
IT IS RECOMMENDED TO ASSEMBLE THE PRODUCT ON THE
BOX OR ON A PLANE SURFACE FOR NOT SCRATCH IT.
2
1
Gently hit the pieces with a rubber
hammer to adjust the joint. Repeat
this in the following steps.
Aplique una gota de pegamento y
golpee suavemente la pieza para
ajustar el ensamble. Repita esto en
todos los ensambles
B
D
C
F
H
G
G

3
4
Page 8
L
M
N
E
I

Page 9
5
6
A
J
K
B
C
D
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.

7
8
Page 10
F
H
G
F
H
G
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.

Page 11
9
10
L
N
M
L
N
M
SE RECOMIENDA ARMAR EL MUEBLE
ENTRE DOS PERSONAS /
IT IS RECOMMENDED TO ASSEMBLE THE
PRODUCT BETWEEN TWO PEOPLE
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.

Page 12
11
12
B
D
CE
F
G
H
B
D
C
E
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.
1 Gota x perforación/
1 drop for drilling
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.

Page 13
13
14
I
J
K
I
J
K
L
M
N
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.
1 Gota x perforación/
1 drop for drilling

Page 14
15
16
B
C
D
E
J
KL
N
M
I
F
G
H
A
LN
M
J
K
E
B
C
DH
F
D
K
N
L
M
J
E
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.

Page 15
17
18
O
P
Q
FC
FC
O
P
O
P
FC
R
R
O
P
Q
FC
2"
1 1/4"
Q
Turn minifix cams to
the right to tighten.
Gire las cajas minifix
hacia la derecha para
apretar las piezas.
REPETIR ESTOS PASOS
PARA LOS OTROS CAJONES /
REPEAT THIS STEPS FOR
THE OTHER DRAWERS

Page 16
19
A
B
C
D
FC
FC
FC
L
N
M
J
P
P
R
O
After you finish the adjustment
of the cams, cover them with
the cover caps.
Después de ajustar todas las
cajas minifix, cúbralas con las
tapas adhesivas.
After you finish assembling the
cabinet, take off the adhesive
letters.
Al terminar de armar, desprenda
las letras adhesivas.
A
DESLICE LOS CAJONES
DENTRO DEL MUEBLE /
SLIDE THE DRAWERS
INSIDE THE CABINET

Page 17
WARRANTY POLICY
PÓLIZA DE GARANTÍA
This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the
product has been resold, rented, etc.
TUHOME Furniture has a 3 year warranty coverage in wooden parts and 1 year warranty
coverage in hardware pieces since its manufacturing date, which you can see in the lot
number printed on the product box and the assembly instructions leaflet.
Warranty covers materials and workmanship imperfections which impair the assembly
or correct functioning of the cabinet.
This warranty is not valid if the defects or imperfections are caused by the incorrect
following of the assembly instructions, warnings and recommendations, misuse,
intentional damage, fire or flood, or after modifications or any kind of alteration, or
repaired by someone not authorized by TUHOME Furniture, when it´s been assembled 3
months after the date of purchase. These defects MUST be reported before the warranty
coverage period ends. Once the product has been assembled, the company will not be
responsible for defective and/or damaged parts.
TUHOME Furniture will take no liability for incidental or consequential damages caused
to or by the product (This may not apply in your state).
To make this warranty valid you must write to our customer service email describing the
product defect, lot number and submitting your sales reciept or proof of purchase, or
contact us at our customer service line. Replaced parts will be under the product´s
original warranty coverage period. Damaged parts will become property of the
company.
There are no other warranties applicable to this product.
FURNITURE
IF ANY PARTS ARE BROKEN OR MISSING PLEASE
CONTACT US AT: 1-888-391-01-66 /
[e-mail]
OUR CUSTOMER SERVICE TEAM WILL PROVIDE
YOU HELP TO RESOLVE ANY ISSUES IMMEDIATELY