TUHOME Furniture Alaska CLB 5982 User manual

If any parts are broken or missing please contact us.
Our customer service team will provide you help
to resolve any issues immediatly
ASSEMBLY INSTRUCTIONS
3 DRAWER CABINET
It’s much better if you get some company for this!

2
Index
Hi! my name is
Armando, and I’ll be
with you while you
assemble this cabinet.
What will you need?
Where should you start?
What’s in the hardware bag?
Let’s start assembling!
Our last recommendations for taking care of your cabinet
2
3
How much weight does your cabinet resist?
How do the dowels and Minifix system work?
(We also explain what they are)
4
5
6-16
17
18
What will you need?
A flat, smooth surface. You can use the
cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it
can make the work much easier :)
Phillips head screwdriver Flat head screwdriver Rubber hammer
Hammer

3
Where should you start?
(When the cabinet is already assembled
there’s no warranty for this)
This is so IMPORTANT!
Over the next few pages is the
panel and hardware content for this
cabinet.
Please make sure that the quantity
of each one is correct, and that
everything is in good shape.
A - x1
D - x1
G - x2
J - x3
B - x1
E - x2
H - x3
K - x3
C - x1
F - x1
I - x3
L - x2
Panel quantity

4
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its
content it’s neccesary for assembling you cabinet.
x22
Wood dowel
x16
Minifix cam
Spreading bolt
x16
Cover caps
x16
x1
Glue
x12
Flat head
screw
x16
Drywall
screw
2"
x3
Drawer slides
+ screws
x4
Wheel caster

5
How do the dowels and Minifix system work?
Wood dowels
this is so important too!
They are little wooden cylinders.
1
Before inserting the
dowel, put a drop of
glue inside the drilling.
2
Put in the dowel and
softly hit it with the
rubber hammer, until it’s
fully inside.
Everytime you’re using one of these
connectors during the assembly, you
should follow these same steps.
Don’t forget to gently hit the panels to
adjust the joint.
3
When joining two panels together,
you should put another drop of
glue in the drillings where the
dowels are going.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
2You should insert these cams
with the little arrow pointing
towards the drilling on the
panel’s edge (shown on the
left).
3This is a spreading bolt.
You should put it with the
black plastic part facing down.
4After joining two panels
together you should turn the
cams 180° with a phillips
head screwdriver to adjust
and secure the joint.
1This is a Minifix cam.
It has a little arrow on its
upper surface.
small arrow

6
Let’s start assembling!1
2
You can see the last page of this manual to have
a full look of the panels of this cabinet.
B
C

7
3
4
E x2
E
E
B
C

8
5
A
Turn this
panel over
6
very carefully!
Turn over
the cabinet
A
E
C
A
B
E

9
7
411
4
11
LEFT SLIDE
RIGHT SLIDE
C
C
B
B
E
E
E
A
A
Drawer slides installation
The wheel should go towards the front edge of the panel and
facing down, like this:
Front
Down
Front
Down
Front
Down

10
8
EC
A
L
BL
9
Slide the back panels
inside the grooves.
D

11
10
11
Ix3
B
C
A
L
L
D

12
12
13
Hx3
H
I
J
Drywall
screw 2"
x3

13
14
15
STEP 16
F
F
HJ
I
K
Slide the back panel
inside the groove.

14
16
17
Gx2
H
K
F
The wheel should go
on the rear part of
the drawer.

15
H
K
G
G
HJ
I
K
18
19
x2
x2
Slide the back panel
inside the groove.
The wheel should go
on the rear part of
the drawer.

16
A
After adjusting all the
Minifix cams, cover
them up with the cover
caps.
After finishing the
assembly, lift off al the
adhesive letters.
20
K
K
K
D
C
I
I
IG
G
F
H
H
H
Slide the drawers
inside the cabinet.

17
How much weight does my cabinet resist?
*weight in pounds
But don’t go yet!
There are some
recommendations left for you
to take care of your cabinet
correctly from now on.
Congratulations!
It’s done
SUPER IMPORTANT!
We suggest fixing the cabinet to the
wall, so we can avoid the cabinet
tipping and harming anyone.
Be specially careful with the kids.
22
22
22
33

18
Taking care of your cabinet:
Do not paint the cabinet.
The cabinet it’s exclusively for indoor spaces. Do not expose it to the direct sun.
Clean the metallic hardware with a dry cloth.
DO NOT overload the cabinet (see suggested loads)
Do not hit or hammer the cabinet (only when indicated here).
Don’t drag the cabinet, lift it up with other people.
Avoid direct contact with water, fire or exposing it to high heat.
Cabinet panels
Clean it with thinner, a soft soap solution or simply a
damp cloth.
A
B
C
I
D
E
F
G
G
K
J
L
H
H
H
K
K
I
I
J
J
L
E