Tunstall ePat lite User manual

Blinds control
Bracket
EntertainmentTV
The green LED in the entertainment/blinds
icon [4] is flashing during blinds control mode*.
Switching blinds control mode on
To lower or raise the blinds, you must first switch on blinds
control mode:
Hold down the radio/blinds icon for approx. three seconds
and then release it.
The green LED in the entertainment/blinds icon [4] is
illuminated. Blinds control mode is switched on.
NOTE! If the green LED in the entertainment/blinds icon
is illuminated instead of flashing, you have pressed too
briefly and switched on entertainment instead of blinds
control mode. Please try again.
Lowering and raising the blinds
During blinds control mode you can lower and raise the
blinds:
Lower or raise the blinds by repeatedly tapping the
arrows of the programme selector [5]:
When tapping, the LED next to the tapped arrow lights
up briefly.
If you do not press the program selector [5] for more than
five seconds, blinds control mode is automacally
switched off. The green LED in the entertainment/blinds
icon [4] is no longer flashing.
The green LED in the TV icon [6] is illuminated
during TV operaon*.
Switching TV on
Tap the TV icon [6].
TV is switched on. The green LED in the TV icon [6] is
illuminated. Entertainment is off.
Selecng programme
Select the programme by repeatedly tapping the arrows of
the programme selector [5].
When tapping, the LED next to the tapped arrow lights up
briefly.
Adjusng the volume
Adjust the volume by repeatedly tapping the volume
control icons [7] "–" or "+".
The sound is transmied via the loudspeaker [2].
Alternavely a standard headphone (3.5 mm jack plug) can
be connected to the jack [10].
Switching TV off
Tap the TV icon [6] or directly switch to entertainment
by tapping the entertainment/blinds icon [4].
ForwardBack
UpDown
* NOTE! All funcons of the ePat®lite are described in
these instrucons for use. However, depending on the
installaon in your hospital, only a selecon of these
funcons may be available. Your nursing staff will tell
you which funcons are available to you.
The green LED in the entertainment/blinds icon [4]
is illuminated during entertainment operaon*.
Switching entertainment on
 Briefly tap the entertainment/blinds icon [4].
The green LED in the entertainment/blinds icon [4] is
illuminated. Entertainment is switched on. TV is off.
NOTE! If the green LED in the entertaiment/blinds icon flashes
instead of illuminang, you have pressed too long and thus
switched on blinds control mode instead of entertaiment.
Please try again.
Selecng programme
The number of LEDs lit on the program selector [5] indicates
the current entertainment programme.
Select the programme by repeatedly tapping the arrows of
the programme selector [5]:
Adjusng the volume
Adjust the volume by repeatedly tapping the volume
control icons [7] "–" or "+".
The sound is transmied via the loudspeaker [2].
Alternavely a standard headphone (3.5 mm jack plug) can
be connected to the jack [10].
Switching entertainment off
Briefly tap the entertainment/blinds icon [4] or directly
switch to TV by tapping the TV icon [6].
ForwardBack
UpDown
Bracket
Raise
the blinds
Lower
the blinds
Insert the ePat®lite into the bracket from
above.

© Tunstall GmbH, Orkoen 66, 48291 Telgte, Germany
www.tunstall.de
Service call
00 8813 84, 10/19 (Rev. 3.0)
Paent unit ePat®lite
77 0370 00
Instrucons for use for paents
1
2
3
4
5
6
7
8
12
11
910
1Red call buon
2 Loudspeaker
3CLEAN icon
4Entertainment/Blinds icon
5Programme selector
6TV icon
7Volume control
8 Reading light icon
9 Microphone
10 Jack for headphone
11 Room light icon
12 Service call icon
Triggering a call
The red call buon [1] is faintly
illuminated in order to find the
buon in the dark.
If you need help, press the red call buon [1].
The call buon [1] flashes brightly to confirm your call.
Nursing staff will come to you or will speak to you via
loudspeaker [2].
You can answer via the microphone [9].
You can reduce the volume by tapping the “–” icon of
the volume control [7].
Room light/Reading light
The reading light icon [8] is
faintly illuminated in order to
find the icon in the dark..
Switching the light on and off
To switch the light on or off, tap the appropriate light icon.
Dimming the light
You can dim a dimmable light source by keeping the light
icon pressed.
Each me the icon is pressed the light changes between
fading up and fading down.
Switching on dimmed light
Keep the light icon pressed when switching on unl the
desired brightness is reached.
Room light Reading light
NOTE! The service call is not available in every hospital.
Your nursing staff will tell you whether the service call is
available for you.
With the service call you can order
non-medical services.
If you have a non-medical request, tap the blue service
call icon [12].
The white LED next to the service call icon [12] flashes
to confirm your service call.
Service staff will come to you or will speak to you via
oudspeaker [2].
You can answer via the microphone [9].
You can reduce the volume by tapping the “–” icon of
the volume control [7].
You can cancel the service call, for example, if you have
inadvertently triggered it:
To cancel a service call, press and hold the service call
icon [12] for three seconds unl the white LED goes out.
Wiping the black touch panel
If you want to wipe off the black touch panel,
you must temporarily disable it:
To disable the black touch panel, press and hold the
CLEAN icon [3] for three seconds unl all LEDs light up.
As long as the two green LEDs [4] and [6] are on
(approx. eight seconds), the touch panel has no funcon.
You can wipe it off.