TV One C2-2200 Specification sheet

www.tvone.com
 


 



 






Output monitor such as a TV
or Broadcast Monitor
DVD Player, VCR
Camera, etc
To control the unit using
the optional CC-300 or
via Computer Control
Power Input
12 Volts DC
C2-2000 Series
QUICK SET-UP
C2-2200 Unit
C2-2250 Unit
C2-2350 Unit
Congratulations on
purchasing your C2-2000
series unit. Use this card as a
quick setup guide to help you
get started and get a basic
feel for the powerful toolset
of features the unit contains.
To get the most out of and
fully understand the unit,
please refer to the C2-2000
Series Manual.
Please bear in mind this
card is for use with the
C2-2000 series, not just
one unit. Some options and
connectors may vary or differ
from unit to unit.
Contents & Connecting
First things fi rst, before you even begin to use the unit,
unpack it from its packaging and make sure you have all
of the following:
1 Infra-red remote control
1 Operations Manual
1 Composite video (CV) Cable, 6' (2m) BNC to BNC
1 RS-232 9D plug to socket, 6' (2m)
1 HD15 to HD15 Cable, 6' (2m)
1 AC Power adaptor (optional)
1 DVI I/O Cable, 6' (2m) DVI-D
Included with SDI-equipped units only:
1 SDI Cable, 6' (2m) Zplus BNC to BNC
If any items are missing or defective, contact your
supplier. If you are unable to resolve the problem
with your supplier, contact TV One via the web at:
http://www.tvone.com/support
for prompt replacement.
Once you have connected all the required equipment
as per the diagram you are ready to unleash the full
potential of the unit.
On turning on the unit, provided all the desired
connections have been made properly, you will see a PC
loop through image on the screen. Please note for some units
in the series the image may be scaled up to 1024 x 768.
To begin using the functions of your unit please consult
the manual supplied which will cover each area of
the unit in greater detail.
Your unit is now ready.
Games Console
or other source
1 Audio Output
going to a TV or
other Audio device
Games Console
or other source
4 Audio Inputs
- source such as
a DVD player or
Games Console
Camera, etc
RGB Input and Outputs.
Both PC/HD and DVI
can be used.
Optional A2-2000 or
S2 Series switchers
Connection to your network via a
RJ45 connection. Please note, you
must assign the unit a unique IP
address. See adjust Ethernet Menu.
Quick-setup-C2-Series.indd 5 24/7/06 11:07:49 am