Twin-Star International 23WM352 User manual

PARTS LIST
Part Description Quantity
PARTS
A Hearth/Base 1
B Left Front Panel 1
C Right Front Panel 1
D Center Front Panel 1
E Left Side Panel 1
F Right Side Panel 1
G Mantel/Top 1
HARDWARE
L Bolt 1/4” x 1 1/4” 22
M Washer 22
N Wood Dowel 12
WOOD FIREPLACE MANTEL
23WM352
WOOD MANTELASSEMBLY INSTRUCTIONS
E-1
E-mail: [email protected]
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
For Customer Service:
33445
23WM352-ESF-10Apr_09.indd 2 2009-4-10 17:41:02

Right
Front
Panel
Left
Front
Panel
Center Front
Panel
C
B
D
N
NM
L
N
N
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C) and Left Front Panel (B) and set out
face down on a scratch free surface.
3. Push the Right Front Panel and Left Front Panel
snug to the Center Panel. Make sure the Wood
Dowels are seated in the pre-drilled holes. Insert
Bolts (L) and Washers (M) into the holes in the
mounting blocks.
HAND TIGHTEN ONLY.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
E-2
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: [email protected] or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
• Do not sit on top of the mantel.
CAUTION:
DO NOT MOVE MANTELOR INSERT WHILE PLUGGED INTO POWER SUPPLY.
23WM352-ESF-10Apr_09.indd 3 2009-4-10 17:41:03

E-3
A
N
N
NN
N
L
M
L
M
L
M
Hearth/Base
Completed Front
Assembly
Completed Assembly
Left
Side
Panel
Right
Side
Panel
F
E
23WM352-ESF-10Apr_09.indd 4 2009-4-10 17:41:04

Completed
Unit
E-4
Twin-Star International, Inc.
Delray Beach, FL 33445
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 23WM352
Made in China
Printed in China
© 2009, Twin-Star International, Inc.
G
L
M
Mantel/Top
Completed
Assembly
Install
Insert
From
Back
Electric
Fireplace Insert
Locate Mantel/Top (G) and lay
finished side up on top of completed
assembly. From the inside, attach the
Mantel using Bolts (L) and Washers
(M) through the pre-drilled holes in
the Panels.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver
tighten all Bolts alternating top and
bottom, left and right.
11. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
12. Lift insert carefully into the back of
the unit and center in the insert
opening. Do not drag insert across
Hearth/Base (A) as it may scratch
your unit.
13. Install the mounting brackets to hold
insert flush against the inside of the
mantel front panel.
9.
PLEASE READ ALL “ELECTRIC
FIREPLACE INSERT”
INSTRUCTIONS PRIOR TO
INSTALLING ELECTRIC INSERT
IN YOUR COMPLETED
FIREPLACE MANTEL. INSTALL
THE INSERT IN YOUR
FIREPLACE CLOSE TO ITS
FINAL POSITION.
MOVE YOUR COMPLETED UNIT
ONLY SHORT DISTANCES.
MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO
PEOPLE TO MOVE COMPLETED
UNIT INTO ITS FINAL POSITION.
23WM352-ESF-10Apr_09.indd 5 2009-4-10 17:41:05