Twist UFA51050 User manual

UFA51050
UFA51053
TWIST
Twist Robe Hook
Installation/Installation/Instalación
CUSTOMER SERVICE
TOLL-FREE 1-888-OK-ULTRA (658-5872)
Tools You Will Need / Outils dont vous aurez besoin/ Herramientas necesarias
SAFETY TIPS
•If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed
before using flame. Otherwise, warranty will be void on those parts.
•Cover your drain to avoid losing parts.
•0℃~55℃.
CONSIGNES DE SÉCURITÉ
•Si vous posez le robinet par brasage, il est essentiel de retirer les sièges, les cartouches et les rondelles avant
d’appliquer la flamme, faute de quoi la garantie sur ces pièces sera annulée.
•Couvrez le drain pour ne pas perdre des pièces.
•0℃~55℃.
CONSEJOS DE SEGURIDAD
•En el caso de utilizar soldadurapara instalar el grifo, remueva los asientos, cartuchos y arandelasantes de usar la
llama. De lo contrario, se anulará la garantíapara esos componentes.
•Tape la boca del desagüe para prevenir la pérdidade piezas pequeñas.
•0℃~55℃.
Adjustable Wrench
Clé à molette
Llave ajustable
Phillips Screwdriver
Tournevis cruciforme
Destornillador cruciforme
Groove join pliers
Pince multiprise
Pinzas ajustables

UFA51050
UFA51053
UFA51050
UFA51053
Installation/Installation/Instalación Replacement Parts / Pièces de rechange / Repuestos
Limited Lifetime Warranty
Ultra Faucets warrants to the original purchaser that its products will be free from defects in workmanship and materials. All Ultra
Faucets are provided with a life time limited warranty. This warranty does not cover any other labor or service charges associated with
the removal, repair, or reinstallation of Ultra Faucets products. This express warranty does not apply to products that have been
damaged as a result of misuse, abuse, negligence, accident, faulty installation or maintenance practices and/or used in any manner
contrary to those recommended by the manufacturer.
Need help? Please call our toll-free customer service line at 1-888-658-5872 for additional assistance or service.
Besoin d’aide? Veuillez communiquer avec notre service à la clientèle au numéro gratuit 1-888-658-5872 pour tous renseignements
ou services complémentaires.
¿Requiere asistencia? Llame a nuestro Servicio al Cliente, sin costo, al 1-888-658-5872para asistencia adicional o servicio.
9Q224700PLBush &Screw Assembly3
9Q224800CP/AP/HABase Assembly4
5C0001500CP0Handle2
9Q224900CP/AP/HABase Assembly5
5E0M0115PLAerator6
Part No.DescriptionNO.
9Q1350NTSet Screw & Allen Key1
3
Drill 1/4" holes in marked locations.
Determine the location of the accessory.
1
Mark drill holes in desired location.
2
6
Temporarily place the accessory on the
mounting bracket to check alignment.
If necessary, loosen the screws and
realign the mounting bracket.
Drive the wall anchors into the drilled
holes with a Phillips screwdriver.
4
Place the mounting bracket over the
wall anchors. Secure it to the wall using
the supplied screws.
5
Place accessory on the mounting
bracket. Secure it to the wall using the
bottom set screw.
7