tws TS80S User manual

Manual
TWS real wireless stereo
Left (slave) earbud operation instruction
mode
operation
Prompt tone
LED indicator
Turn on
1. Open the charge case
2. Long press touch pad for 3s when
earbuds turn off
Power on
Blue led light is
on for 1s
Turn off
1. Put earbuds in charger case and close
cover
2. Earbuds no any connection within 10
minutes, turn off automatically
3. Long press touch pad for 10s when
earbuds on
Power off
Blue led blinks
for 3times then
off
Paring on (with
mobile phones)
To take earbuds out charger case, L,R
earbuds connect with each other, the
Master earbud is in the mode of
reconnecting and paring
Paring (paring
starting)
Connected
(paring success)
Red,blue Led
flash in turn till
connected with
mobile phone in
the
reconnecting
and paring
mode
TWS connection
1. L ，R earbuds to be taken out charger case at same time, then in the TWS
connection mode
2. The first one out of case is master and connect with mobile phone, another is
slave to connect with master earbud
3. L,R earbud blue Led lights 0.5s on after TWS connected
Mode switch
1. Music mode as default when to turn on
2. Twice touch pad to switch between
music or gaming mode
Gaming
mode/music
mode
/
Play/pause
/
/
/
Volume +
NA
NA
NA
Volume -
Single touch under music or calling
NA
NA
Previous
Long touch pad for 2s under playing
NA
NA

Next
/
/
NA
In coming calling
Mobile phone
ringtone
/incoming call
Answer calling
Twice touch L or R touch pad
Beep
Hold up calling
Twice touch L or R touch pad
Beep
Reject calling
Long touch L or R touch pad for 1-2s
Beep
Voice assistance
Three touch L or R touch pad
Beep
NA
Quit Voice
assistance
Three touch L or R touch pad
Beep
NA
Clean up the
information of
mobile phone
connection
Long touch pad for 10s when earbuds turn
off
Blue Led flashes
three times
DUT mode
Touch 5 times L or R touch pad in the
paring mode
Blue Led lights
on
Mobile phone
turn off BT/BT
disconnect/over
long distance
Reconnecting and paring mode
Disconnected,
paring
Low battery
Below 3.5v warning reminder every 4
minutes
Low battery
Charging
Earbuds in charging case and cover closed
Red Led lights
on and blue Led
off after full
charged
Paring name
MS-TS80s
Touch pad

Right (master) earbud operation instruction
mode
operation
Prompt tone
LED indicator
Turn on
3. Open the charge case
4. Long press touch pad for 3s when
earbuds turn off
Power on
Blue led light is on for
1s
Turn off
4. Put earbuds in charger case and
close cover
5. Earbuds no any connection within
10 minutes, turn off automatically
6. Long press touch pad for 10s when
earbuds on
Power off
Blue led blinks for
3times then off
Paring on (with
mobile phones)
To take earbuds out charger case, L,R
earbuds connect with each other, the
Master earbud is in the mode of
reconnecting and paring
Paring (paring
starting)
Connected
(paring success)
Red,blue Led flash in
turn till connected
with mobile phone in
reconnecting and
paring mode
TWS
connection
4. L ，R earbuds to be taken out charger case at same time, then in the TWS
connection mode
5. The first one out of case is master and connect with mobile phone, another is
slave to connect with master earbud L,R earbud blue Led lights 0.5s on after TWS
connected
Mode switch
/
/
/
Play/pause
Twice touch pad
/
/
Volume +
Single touch under music or calling
Volume -
NA
NA
NA
Previous
NA
NA
NA
Next
Long touch pad for 2s under playing
/
NA
In coming
calling
Mobile phone
ringtone
/incoming call
Answer calling
Twice touch L or R touch pad
Beep
Hold up calling
Twice touch L or R touch pad
Beep
Reject calling
Long touch L or R touch pad for 1-2s
Beep
Voice assistance
Three touch L or R touch pad
Beep
NA
Quit Voice
assistance
Three touch L or R touch pad
Beep
NA
Clean up the
information of
mobile phone
connection
Long touch pad for 10s when earbuds
turn off
Blue Led flashes three
times
DUT mode
Touch 5 times L or R touch pad in the
Blue Led lights on

paring mode
Mobile phone
turn off BT/BT
disconnect/ove
r long distance
Reconnecting and paring mode
Disconnected
paring
Low battery
Below 3.5v warning reminder every 4
minutes
Low battery
Charging
Earbuds in charging case and cover
closed
Red Led lights on and
blue Led off after full
charged
Paring name
MS-TS80s
TWS real wireless stereo
Charging case instruction
Item
Operation
Charging case charged (input)
Plug in USB cable
Charging case discharged (output)
Earbuds in case on right position, case to start
charging
Earbuds LED indication during charging
Item
Charging case to charge earbuds
The indicator of case discharging (output)
Case cover closed and indicate current power
level for 5s,then to light LED off
To restore factory default setting
To press case button for 3s to clean up paring information (to success setting, case white LED
flashes one time ), to press case button for 10s to restore factory default setting (to success
setting, case white LED flashes 3 times)
Earbuds LED indication during charging
Power level (charging case output)
LED indicator
70%-100% level (>3.94V)
Close or open the case cover, green LED light on for
5s,then off
40%-70% level (3.92V-3.73V)
Close or open the case cover, yellow LED light on for
5s,then off
10%-30% level (3.73V-3.4V）
Close or open the case cover, red LED light on for 5s,then
off
5%-10% level（3.2V-3.4V）
Close or open the case cover, red LED blinks for 5s,then

off
Below3.2V
Charging case only sends turn on/off pules signal to
earbuds, boosted circuit and LED stop working
Power priority status
Power level
Earbuds status
Charging case LED status
No charging
Put into earbuds
No light on
No charging
Take out earbuds
No light on
Charging and not full charged
Without earbuds
Indicate the case charging status
Charging and not full charged
Earbuds charging
Indicate the case charging status
Charging and not full charged
Earbuds full charged
Indicate the case charging status
Charging and full charged
Without earbuds
Indicate the case power full status
Charging and full charged
Earbuds charging
Indicate the case power full status
Charging and full charged
Earbuds full charged
Indicate the case power full status
Pull out cable after charging
Without earbuds
No light on
Pull out cable after charging
Earbuds full charged
No light on
Pull out cable after charging
Earbuds no full charged
No light on
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment