U.S. Security Solutions CA601 User manual

User sManual
Pleasereadthis instructionthoroughlybeforeoperation
and retainitforfuturereference.
601 V1.2
IR REMOTECONTROLSYSTEM
USER SMANUAL
User sManual
Pleasereadthis instructionthoroughlybeforeoperation
and retainitforfuturereference.
601 V1.2
IR REMOTECONTROLSYSTEM
USER SMANUAL

Thank-YouNoteBeforeYouGetStart
First ofall, wewould liketoexpressourgratitudetoyouforpurchasingCPcam
products.Onceagain,this product is designeduniquely tomeet all yourpersonalneeds
withourgreat industry-designingability andoureverlastingperseverancetothequality
ofall ourproducts.
This manualwillintroduceyouhowtoinstall this camera.Pleasekeepit well foryour
futurereference.
Now,wewould liketoinviteyoutopersonally experiencethis user-friendly manualand
all of thepowerfulfunctions this CPcamproduct offers.
http://www.cpcamcctv.com
Thank-YouNoteBeforeYouGetStart
First ofall, wewould liketoexpressourgratitudetoyouforpurchasingCPcam
products.Onceagain,this product is designeduniquely tomeet all yourpersonalneeds
withourgreat industry-designingability andoureverlastingperseverancetothequality
ofall ourproducts.
This manualwillintroduceyouhowtoinstall this camera.Pleasekeepit well foryour
futurereference.
Now,wewould liketoinviteyoutopersonally experiencethis user-friendly manualand
all of thepowerfulfunctions this CPcamproduct offers.
http://www.cpcamcctv.com

All the safetyand operating instructions shouldberead beforeoperation. The improperoperation may causepermanent damage.
The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the userto the
presence of uninsulated"dangerousvoltage"within the product'senclosure that maybeof sufficient magnitude to
constitute a risk of electricshockto persons.
The exclamation point within an equilateraltriangle isintendedto alert the userto the presence of important
operating and maintenance-(servicing)instructionsin the literature accompanying the appliance.
WARNING
WARNING
Please lift and place this equipment gently.
Do not expose this equipment to open sunlight.
Do not use this equipment nearwaterorin contact with water.
Do not spill liquid of anykind on the equipment.
Do not attempt to have this equipment serviced byyourself.
Installation should be made byqualified service personnel.
All the safetyand operating instructions shouldberead beforeoperation. The improperoperation may causepermanent damage.
The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the userto the
presence of uninsulated"dangerousvoltage"within the product'senclosure that maybeof sufficient magnitude to
constitute a risk of electricshockto persons.
The exclamation point within an equilateraltriangle isintendedto alert the userto the presence of important
operating and maintenance-(servicing)instructionsin the literature accompanying the appliance.
WARNING
WARNING
Please lift and place this equipment gently.
Do not expose this equipment to open sunlight.
Do not use this equipment nearwaterorin contact with water.
Do not spill liquid of anykind on the equipment.
Do not attempt to have this equipment serviced byyourself.
Installation should be made byqualified service personnel.
** The operating humidity is between0%~80%.
** The operating humidity is between0%~80%.

1.IRcontrolforPTZcamera, DVR, LIGHT
2.IRemissiondistance:straight-lineis10m; transmit at left andright 22.5
degree is8m
3.Controlupto255 PTZ camera&LIGHT
4.Controlupto255 DVR
5.Enablingdifferent ID
6.Current Consumption: AAA Sizebatteryx2
7.Not support digitalzoom.
ªSPECIFICATIONS SPECIFICATIONS IRTRANSMITTER
IRTRANSMITTER
ªSPECIFICATIONS SPECIFICATIONS
1. HomeElectronics (lights, TV,etc.)
2. Connected toRS-485 bytransmissionline
3. DC INx1, DC OUTx1
4. Output Terminal
5. Current Consumption: 50mA
REMOTESWITCH
REMOTESWITCH
1.Support PTZcamera&DVRcontrol
2.Connected toRS-485 bytransmissionline
3.IRReceiver
4.Controlupto255 PTZ &LIGHT
5.Controlupto255 DVR
6.Enablingdifferent ID
7.Current Consumption: DC 12V,25mA
ªSPECIFICATIONS SPECIFICATIONS
IRRECEIVER
IRRECEIVER
SPECIFICATIONS
1
1.IRcontrolforPTZcamera, DVR, LIGHT
2.IRemissiondistance:straight-lineis10m; transmit at left andright 22.5
degree is8m
3.Controlupto255 PTZ camera&LIGHT
4.Controlupto255 DVR
5.Enablingdifferent ID
6.Current Consumption: AAA Sizebatteryx2
7.Not support digitalzoom.
ªSPECIFICATIONS SPECIFICATIONS IRTRANSMITTER
IRTRANSMITTER
ªSPECIFICATIONS SPECIFICATIONS
1. HomeElectronics (lights, TV,etc.)
2. Connected toRS-485 bytransmissionline
3. DC INx1, DC OUTx1
4. Output Terminal
5. Current Consumption: 50mA
REMOTESWITCH
REMOTESWITCH
1.Support PTZcamera&DVRcontrol
2.Connected toRS-485 bytransmissionline
3.IRReceiver
4.Controlupto255 PTZ &LIGHT
5.Controlupto255 DVR
6.Enablingdifferent ID
7.Current Consumption: DC 12V,25mA
ªSPECIFICATIONS SPECIFICATIONS
IRRECEIVER
IRRECEIVER
SPECIFICATIONS
1

DVR
PTZ CAMERA
REMOTE
SWITCH IRRECEIVER
IRTRANSMITTER
: connect
: transmit
SITUATIONSIMULATE
2
DVR
PTZ CAMERA
REMOTE
SWITCH IRRECEIVER
IRTRANSMITTER
: connect
: transmit
SITUATIONSIMULATE
2

RS485-B
(green colorline)
RS485-A
(red colorline)
Note:
Connect RS485-A(redcolorline)”to11th apertureon DVR’sSub-DPlug, PTZ orRemoteSwitch.
Connect RS485-B(greencolorline)”to10th apertureon DVR’sSub-DPlug, PTZ orRemoteSwitch.
RS 485
3
RS485-B
(green colorline)
RS485-A
(red colorline)
Note:
Connect RS485-A(redcolorline)”to11th apertureon DVR’sSub-DPlug, PTZ orRemoteSwitch.
Connect RS485-B(greencolorline)”to10th apertureon DVR’sSub-DPlug, PTZ orRemoteSwitch.
RS 485
3

PANELDESCRIPTION 1.BLUELINEAREA –Control CAMERA
2.REDLINEAREA –Control DVR
3.OTHERS –SupportCAMERA&DVR
4.Digital Zoomisnotsupportednow.
DVR
CAMERA
Preset Light
Zoommax
Zoommin
Zoom+
Zoom-
Auto Menu
UP
Left
ID
DigitalZoom
Right
Down
ENTER
Channelselectionbuttons
QUAD/-
PIP/+
Rec
Zoom
Pause
Menu Play
F.F.
REW
Stop
Search
Numberselection
buttons
4
PANELDESCRIPTION 1.BLUELINEAREA –Control CAMERA
2.REDLINEAREA –Control DVR
3.OTHERS –SupportCAMERA&DVR
4.Digital Zoomisnotsupportednow.
DVR
CAMERA
Preset Light
Zoommax
Zoommin
Zoom+
Zoom-
Auto Menu
UP
Left
ID
DigitalZoom
Right
Down
ENTER
Channelselectionbuttons
QUAD/-
PIP/+
Rec
Zoom
Pause
Menu Play
F.F.
REW
Stop
Search
Numberselection
buttons
4

FUNCTIONDEFINITION -CAMERA
Zoommax
Press the Zoommax button, thepicturewillbecomethebiggest sizedirectly.
Zoommin
Press the Zoommin button, thepicturewillbecomethesmallest sizedirectly.
Zoom+/ –
Press the Zoom+ or Zoom- buttontochangetheratio.
Auto
Pleaserefer to PTZUser’sManual.
Menu
Press Menu toenter Camerasetting menu.
Preset
Pleaserefer to PTZUser’sManual.
Light
Press Light buttontocontrolremoteswitch(ON/OFF).
UP, DOWN, L, and R
Press UP,DOWN,LandRtocontrolPTZ camera.
If youpress over 2seconds, PTZcamerawillmovecontinuously.
5
FUNCTIONDEFINITION -CAMERA
Zoommax
Press the Zoommax button, thepicturewillbecomethebiggest sizedirectly.
Zoommin
Press the Zoommin button, thepicturewillbecomethesmallest sizedirectly.
Zoom+/ –
Press the Zoom+ or Zoom- buttontochangetheratio.
Auto
Pleaserefer to PTZUser’sManual.
Menu
Press Menu toenter Camerasetting menu.
Preset
Pleaserefer to PTZUser’sManual.
Light
Press Light buttontocontrolremoteswitch(ON/OFF).
UP, DOWN, L, and R
Press UP,DOWN,LandRtocontrolPTZ camera.
If youpress over 2seconds, PTZcamerawillmovecontinuously.
5

CH1 CH2 CH3 CH4
Press Ch1-4toselect channel.
/ -
Under DVR play mode, it candisplay the4channelsinQUADmode.Under setupmode,it candecreasevalue.
/ +
Under DVR play mode, it candisplay PictureinPicturescreen.Under setup mode,it can increasevalue.
Zoom
Press Zoom buttontoenlargethedigitalpicture.
Rec
Press Rec tostart recording.
;
Under DVR play mode, it canpausethevideo.
¢
Under DVR playback mode, it canstoptheaction.
uu
FF: Play video fast forward.
tt
REW:Play video fast backward.
Menu
Press Menu buttontoenterDVR setting menu.
Search
Press Search button tosearch.
u
Play: Press Play toseepreviousrecorded video.
FUNCTIONDEFINITION -DVR
6
CH1 CH2 CH3 CH4
Press Ch1-4toselect channel.
/ -
Under DVR play mode, it candisplay the4channelsinQUADmode.Under setupmode,it candecreasevalue.
/ +
Under DVR play mode, it candisplay PictureinPicturescreen.Under setup mode,it can increasevalue.
Zoom
Press Zoom buttontoenlargethedigitalpicture.
Rec
Press Rec tostart recording.
;
Under DVR play mode, it canpausethevideo.
¢
Under DVR playback mode, it canstoptheaction.
uu
FF: Play video fast forward.
tt
REW:Play video fast backward.
Menu
Press Menu buttontoenterDVR setting menu.
Search
Press Search button tosearch.
u
Play: Press Play toseepreviousrecorded video.
FUNCTIONDEFINITION -DVR
6

ADJUSTMENTANDSETTINGS
Press DVR, CAMERA and DigitalZoom buttononebyonetoturnon IRTransmitter.
IRTransmitter willturnoff automaticallyafter 8minutesif thereisnooperation.
Pleaserestart again.
If IRReceiver receivesIRsignal, theindicatorof IRReceiverwillflash.
TurningOnthe Powerof IRTRANSMITTER
1.Press DVR”button. 2.Press CAMERA”button. 3.Press DigitalZoom”button.
Step 3
Step 3
Step 3
Step 2
Step 2
Step 2
Step 1
Step 1
Step 1
7
ADJUSTMENTANDSETTINGS
Press DVR, CAMERA and DigitalZoom buttononebyonetoturnon IRTransmitter.
IRTransmitter willturnoff automaticallyafter 8minutesif thereisnooperation.
Pleaserestart again.
If IRReceiver receivesIRsignal, theindicatorof IRReceiverwillflash.
TurningOnthe Powerof IRTRANSMITTER
1.Press DVR”button. 2.Press CAMERA”button. 3.Press DigitalZoom”button.
Step 3
Step 3
Step 3
Step 2
Step 2
Step 2
Step 1
Step 1
Step 1
7

ADJUSTMENTANDSETTINGS
vIDSetting –CAMERA
Forexample: Changing CameraIDfrom001to003
Step 1
Step 1
Step 1
1.Press CAMERA”button.
Step 2
Step 2
Step 2
2. Press”0” 0” 1”.
Step 3
Step 3
Step 3
3. Press ID”button.
Step 4
Step 4
Step 4
4. Press”0” 0” 3”.
Step 5
Step 5
Step 5
5.Press ENTER”button.
*Note:
1.If CAMERA IDis8, pleasepress 0”0””8”and ENTER”.
2.If CAMERA IDis68, pleasepress 0”6””8”and ENTER”.
3.If CAMERA IDis168, pleasepress 1”6””8”and ENTER”.
4.If CAMERA IDis100（or 200）, pleasepress +100”button(or +200”)and ENTER”.
5.TheIDrangeisfrom0to254.
If thesetting isOK àwhenyou press the ID”button, thescreen will show CAMERAID”at the
sametime.
8
If you forget theID(IRReceiverandRemoteSwitch)
àyou can press anythree digits instead of Step2 andset theIDasdefault value ”000”.
Forget theID
Forget theID
ADJUSTMENTANDSETTINGS
vIDSetting –CAMERA
Forexample: Changing CameraIDfrom001to003
Step 1
Step 1
Step 1
1.Press CAMERA”button.
Step 2
Step 2
Step 2
2. Press”0” 0” 1”.
Step 3
Step 3
Step 3
3. Press ID”button.
Step 4
Step 4
Step 4
4. Press”0” 0” 3”.
Step 5
Step 5
Step 5
5.Press ENTER”button.
*Note:
1.If CAMERA IDis8, pleasepress 0”0””8”and ENTER”.
2.If CAMERA IDis68, pleasepress 0”6””8”and ENTER”.
3.If CAMERA IDis168, pleasepress 1”6””8”and ENTER”.
4.If CAMERA IDis100（or 200）, pleasepress +100”button(or +200”)and ENTER”.
5.TheIDrangeisfrom0to254.
If thesetting isOK àwhenyou press the ID”button, thescreen will show CAMERAID”at the
sametime.
8
If you forget theID(IRReceiverandRemoteSwitch)
àyou can press anythree digits instead of Step2 andset theIDasdefault value ”000”.
Forget theID
Forget theID

ADJUSTMENTANDSETTINGS
vIDSetting –DVR
UseDVRpaneltoset DVR ID.
Step 1
Step 1
Step 1
1.Enter themainmenuof DVR
and choose SYSTEM”.
MENU
RECORD
CAMERA
DETECTION
DISPLAY
USER
SYSTEM
SYSTEM
EVENT
Step 2
Step 2
Step 2
2. Enter REMOTE”setup.
SYSTEM
KEYMUTEON
BUZZERSETUP
MESSAE LATCHOFF
DATEDISPLAYD/M/F
DATE1JAN2005
TIME01:38:28
HDD FORAMTNO
SYSTEMRESETNO
LANGUAGEENGLISH
UPGRADESETUP
REMOTESETUP
REMOTESETUP
Step 3
Step 3
Step 3
3. Set theREMOTE MODE as
RS-485, BAUD RATE as
2400 and DVRIDisonthe
list.
REMOTE
REMOTEMODERS-485
BAUD RATE2400
ID001
9
If your command totheDVRwon't berecognized bythereceiver, youcan set DVR’sIDasdefault value000.
If theRemoteModeisRS-485, thenyou can’t controlPTZ viaDVR’spanel*.
(*Whenyouconnect IRReceiver, PTZ and DVR, then theRS-485 willjust berecognized between
IRReceiverandDVR)
ADJUSTMENTANDSETTINGS
vIDSetting –DVR
UseDVRpaneltoset DVR ID.
Step 1
Step 1
Step 1
1.Enter themainmenuof DVR
and choose SYSTEM”.
MENU
RECORD
CAMERA
DETECTION
DISPLAY
USER
SYSTEM
SYSTEM
EVENT
Step 2
Step 2
Step 2
2. Enter REMOTE”setup.
SYSTEM
KEYMUTEON
BUZZERSETUP
MESSAE LATCHOFF
DATEDISPLAYD/M/F
DATE1JAN2005
TIME01:38:28
HDD FORAMTNO
SYSTEMRESETNO
LANGUAGEENGLISH
UPGRADESETUP
REMOTESETUP
REMOTESETUP
Step 3
Step 3
Step 3
3. Set theREMOTE MODE as
RS-485, BAUD RATE as
2400 and DVRIDisonthe
list.
REMOTE
REMOTEMODERS-485
BAUD RATE2400
ID001
9
If your command totheDVRwon't berecognized bythereceiver, youcan set DVR’sIDasdefault value000.
If theRemoteModeisRS-485, thenyou can’t controlPTZ viaDVR’spanel*.
(*Whenyouconnect IRReceiver, PTZ and DVR, then theRS-485 willjust berecognized between
IRReceiverandDVR)

Step 4
Step 4
Step 4
ADJUSTMENTANDSETTINGS
vFunction: Howtoenter themainmenu
Step 1
Step 1
Step 1
1.Press CAMERA”button
or DVR”button.
.
Step 2
Step 2
Step 2
2.Press theIDnumber
(0-254) .
.
Step 3
Step 3
Step 3
3.Press Menu”button andMenu list willbeon thescreen.
Menu
( for DVR)
Menu
( for CAMERA)
4. Press ENTER”button.
*Note:
1.If IDnumberis8, pleasepress 0”0””8”.
2.If IDnumberis68, pleasepress 0”6””8”.
3.If IDnumberis168, pleasepress 1”6””8”.
4.If IDnumberis100（or 200）, pleasepress +100”button(or +200”).
10
Step 4
Step 4
Step 4
ADJUSTMENTANDSETTINGS
vFunction: Howtoenter themainmenu
Step 1
Step 1
Step 1
1.Press CAMERA”button
or DVR”button.
.
Step 2
Step 2
Step 2
2.Press theIDnumber
(0-254) .
.
Step 3
Step 3
Step 3
3.Press Menu”button andMenu list willbeon thescreen.
Menu
( for DVR)
Menu
( for CAMERA)
4. Press ENTER”button.
*Note:
1.If IDnumberis8, pleasepress 0”0””8”.
2.If IDnumberis68, pleasepress 0”6””8”.
3.If IDnumberis168, pleasepress 1”6””8”
4.If IDnumberis100（or 200）, pleasepress +100”button(or +200”).
10

ADJUSTMENTANDSETTINGS
vPreset
Forexample: InPTZmode,if you want toseethe6th preset position.
vAuto
InPTZ mode,press Auto”buttonand PTZ
willenter theAutoMode.
Press anykeycanstoptheAutoMode.
Step 1
Step 1
Step 1
1.Press Preset”button.
Step 2
Step 2
Step 2
2. Press 0”0”6”
and it willmovetothe6th
position.
Step 1
Step 1
Step 1
Press Auto”button.
11
ADJUSTMENTANDSETTINGS
vPreset
Forexample: InPTZmode,if you want toseethe6th preset position.
vAuto
InPTZ mode,press Auto”buttonand PTZ
willenter theAutoMode.
Press anykeycanstoptheAutoMode.
Step 1
Step 1
Step 1
1.Press Preset”button.
Step 2
Step 2
Step 2
2. Press 0”0”6”
and it willmovetothe6th
position.
Step 1
Step 1
Step 1
Press Auto”button.
11

REMOTESWITCH
RJ-11
DC INPUT
SET UP
(ON/OFF
Switch)
DC OUTPUT
vIDSetting:
TheIDsetting isthesameastheCAMERAID.
12
REMOTESWITCH
RJ-11
DC INPUT
SET UP
(ON/OFF
Switch)
DC OUTPUT
vIDSetting:
TheIDsetting isthesameastheCAMERAID.
12
REMOTE
SWITCH
DC
SOURCE DC LAMP
DC BUZZER
+
+
-
DC POWERINPUT
DC POWERINPUT
ToDCPower Source
REMOTE
SWITCH
AC PLUG
AC LAMP
AC BUZZER
L
L
N
ACPOWERINPUT
ACPOWERINPUT
ToACPower Source
REMOTE
SWITCH
DC
SOURCE DC LAMP
DC BUZZER
+
+
-
DC POWERINPUT
DC POWERINPUT
ToDCPower Source
REMOTE
SWITCH
AC PLUG
AC LAMP
AC BUZZER
L
L
N
ACPOWERINPUT
ACPOWERINPUT
ToACPower Source
RWARNING
If theinputvoltageistoohigh, theproduct
longevitywouldbeaffected. And it mightalso
causetheproduct tobreakdown.
RWARNING
If theinputvoltageistoohigh, theproduct
longevitywouldbeaffected. And it mightalso
causetheproduct tobreakdown.