Ubiquiti airMAX Omni AMO-2G10 User manual

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
Antenna Pole Clamps (Qty. 2) Carriage Bolts (Qty. 4)
Serrated Flange Nuts (Qty. 4) RF Cables (Qty. 2)
Package Contents
Installation Requirements
Rocket®M2 (sold separately)
13 mm wrench
Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC
ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-
grade, shielded Ethernet cable from Ubiquiti. For more details, visit ui.com/toughcable
Hardware Installation
1.
AMO-2G10 Quick Start Guide

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
2.

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
3.

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
4.

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
5.

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
Specifications
AMO-2G10
Dimensions 1012 x 122 x 105 mm
(39.84 x 4.8 x 4.13")
Weight with Mount 2.1 kg (4.24 lb)
Frequency 2.35 - 2.55 GHz
Gain 10 dBi
Elevation Beamwidth 12°
Electrical Downtilt 4°

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
Max. VSWR 1.7:1
Wind Survivability 200 km/h (125 mph)
Wind Loading 97.9 N @ 200 km/h
(22 lbf @ 125 mph)
Polarization Dual Linear
Cross-Pol Isolation 25 dB Min.
RF Connectors 2 RP-SMA Connectors (Weatherproof)
Mounting Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included
ETSI Specification EN 302 326 DN2
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different
power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials
or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with
any other antenna or transmitter. For the specific separation distance, refer to the Quick Start Guide for your Rocket device (transmitter).
L’antenne et l’émetteur doit être installé pour fournir une distance de séparation de toute les personnes et ne doit pas être situé ou opérant en conjonction

AMO-2G10 Quick Start Guide
https://dl.ubnt.com/qsg/AMO-2G10/AMO-2G10_EN.html[11/10/2020 9:28:27 AM]
avec une autre antenne ou un autre émetteur. Pour la distance spécifique de séparation, se référer au Guide de démarrage rapide pour votre appareil Rocket
(l’émetteur).
WEEE Compliance Statement
Declaration of Conformity
Online Resources
© 2020 Ubiquiti Inc. All rights reserved.