Ubiquiti airMAX Sector AM-9M13 User manual

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 1/13
Antenna Antenna Bottom Cover U-Brackets (Qty. 2)
V-Brackets (Qty. 3) M12x180 Bolts (Qty. 2) M12x130 Bolts (Qty. 2)
M8x25 Bolts (Qty. 4) M3x8 Tapp  ng Screw M12 Serrated Flange Nuts (Qty.
8)
M8 Serrated Flange Nuts (Qty.
4) Bush
 ng
Package Contents
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 2/13
Installat  on Requ  rements
Rocket®M900 (sold separately)
Two adjustable wrenches or a comb  nat  on of two 19 mm, one 14 mm, and one 13
mm wrenches
One #2 Ph  ll  ps screwdr  ver
Sh  elded Category 5 (or above) cabl  ng should be used for all w  red Ethernet
connect  ons and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor env  ronments
and destruct  ve ESD events w  th  ndustr  al-grade, sh  elded Ethernet cable from
Ub  qu  t  . For more deta  ls, v  s  t u  .com/toughcable
Hardware Installat  on
1.
2.
3.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 3/13
4.
5.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 4/13
6.
7.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 5/13
8.
9.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 6/13
10.
11.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 7/13
Note: Do not t  ghten the bolts and nuts completely because you w  ll need
to  nsert bolts  nto the U-Brackets and then adjust the U-Brackets.
12.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 8/13
Assembled V  ew: Upper Bracket
13.
Assembled V  ew: Lower Bracket
14.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 9/13
15.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 10/13
16.
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 11/13
Spec  f  cat  ons
AM-9M13
D  mens  ons 129 x 29 x 13.4 cm
We  ght 12.5 kg (Mount Included)
Frequency 902 - 928 MHz
Ga  n 13.2 - 13.8 dB 
HPOL Beamw  dth 109° (6 dB)
VPOL Beamw  dth 120° (6 dB)
Elevat  on Beamw  dth 15°
Max. VSWR 1.5:1
W  nd Surv  vab  l  ty 125 mph
W  nd Load  ng 148 lbf @ 125 mph
Polar  zat  on Dual L  near
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 12/13
AM-9M13
Cross-Pol Isolat  on 30 dB M  n.
Mount  ng Un  versal Pole Mount and
RF Jumpers Included
Safety Not  ces
1. Read, follow, and keep these  nstruct  ons.
2. Heed all warn  ngs.
3. Only use attachments/accessor  es spec  f  ed by the manufacturer.
WARNING: Do not use th  s product  n locat  on that can be submerged by water.
WARNING: Avo  d us  ng th  s product dur  ng an electr  cal storm. There may be a remote
r  sk of electr  c shock from l  ghtn  ng.
Electr  cal Safety Informat  on
1. Compl  ance  s requ  red w  th respect to voltage, frequency, and current requ  rements  nd  cated
on the manufacturer’s label. Connect  on to a d  fferent power source than those spec  f  ed may
result  n  mproper operat  on, damage to the equ  pment or pose a f  re hazard  f the l  m  tat  ons
are not followed.
2. There are no operator serv  ceable parts  ns  de th  s equ  pment. Serv  ce should be prov  ded only
by a qual  f  ed serv  ce techn  c  an.
L  m  ted Warranty
u  .com/support/warranty
The l  m  ted warranty requ  res the use of arb  trat  on to resolve d  sputes on an  nd  v  dual bas  s, and,
where appl  cable, spec  fy arb  trat  on  nstead of jury tr  als or class act  ons.
Compl  ance
RF Exposure Warn  ng
The antenna and transm  tter must be  nstalled to prov  de a separat  on d  stance from all persons
and must not be located or operat  ng  n conjunct  on w  th any other antenna or transm  tter. For the
spec  f  c separat  on d  stance, refer to the Qu  ck Start Gu  de for your Rocket dev  ce (transm  tter).
L’antenne et l’émetteur do  t être  nstallé pour fourn  r une d  stance de séparat  on de toute les
personnes et ne do  t pas être s  tué ou opérant en conjonct  on avec une autre antenne ou un autre
émetteur. Pour la d  stance spéc  f  que de séparat  on, se référer au Gu  de de démarrage rap  de pour
votre appare  l Rocket (l’émetteur).
WEEE Compl  ance Statement
AM-9M13 Qu  ck Start Gu  de

15.02.2020 AM-9M13 Quck Start Gude
https://dl.ubnt.com/qsg/AM-9M13/AM-9M13_EN.html 13/13
Declarat  on of Conform  ty
Onl  ne Resources
© 2020 Ub  qu  t  Inc. All r  ghts reserved.
AM-9M13 Qu  ck Start Gu  de