Ubiquiti UniFi Cloud Key User manual

UniFiCloudKey EthernetCable microSDCard(8GB)
PackageContents
SystemRequirement
WebBrowser:GoogleChrome(Otherbrowsersmayhavelimitedfunctionality.)
HardwareOverview
UCCKQuickStartGuide

LED
ShutdownButton
EthernetPort
ResetButton
USBTypeCPowerPort
microSDSlot
White Factorydefaults.
FlashingWhite Initializing.
AlternatingWhite/Blue
Deviceisbusy;donottouchorunplugit.This
usuallyindicatesthataprocesssuchasa
firmwareupgradeistakingplace.
Blue Deviceisworkingproperly.
PresstheShutdownbuttontoinitiateagracefulshutdown(allserviceswillbe
shutdownandtheCPUwillremainactive).Afterpressingthebutton,waituntil
theLEDgoesoff,andthenunplugtheCloudKey.
ThisGigabitEthernetportisusedtoconnectthepowerandshouldbe
connectedtotheLANandDHCPserver.Powercanbeprovidedbyan802.3af
PoEswitch,suchastheUniFiPoESwitch.
TheResetButtonservestwofunctions:
RestartPressandreleasetheResetbuttonquickly.
RestoretoFactoryDefaultSettingsPressandholdtheResetbuttonfor
morethanfiveseconds.
Optionalpowersource(5V,minimum1A)ifPoEisnotavailable.
ThisslotisusedtobackuptheCloudKeyconfigurationtothemicroSDcard

(included).
HardwareInstallation
1.
2.
PoweringtheUniFiCloudKey
Usean802.3afcompliantswitch,suchasaUniFiSwitch,oraUSBpowersource
(notincluded).
UniFiSwitch

OR
USBPowerSource
SoftwareInstallation
TheUniFiControllersoftwareispreinstalledontheUniFiCloudKey.Useoneof
thefollowingmethodstolaunchthesoftware:
IfyouareusingChrome,gototheChromeInstructionssection
(recommended).
Ifyouareusingadifferentwebbrowser,gototheInstructionsforOtherWeb
Browserssection.
ChromeInstructions
1.EnsurethatyourhostsystemisonthesameLayer2networkastheUniFi
CloudKey.
2.LaunchtheChromewebbrowserandtypehttps://unifi.ui.comintheaddress
field.Pressenter(PC)orreturn(Mac).
3.EntertheusernameandpasswordforyourUbiquitiaccount.ClickSignIn.

4.EnabletheDiscoverCloudKeyoptionatthetopright.
5.IftheUbiquitiDeviceDiscoveryToolisalreadyinstalled,proceedtostep7.
Ifthetoolisnotinstalled,youwillbepromptedtoaddit.Proceedtostep6.
6.Toinstallthetool:
a.ClickInstall.

b.ClickAddapptoconfirm.
7.TheUbiquitiDeviceDiscoveryToolwillsearchfortheUniFiCloudKey.Click
AdoptintheCloudKey’sActionscolumntocontinue.
8.IftheCloudKeyfirmwareisnotthelatestversion,clickUpgradeFirmwareto
upgradethefirmware.

9.ClickOpenControllerWizardtosetuptheControllerontheCloudKey.
10.TheUniFiSetupWizardscreenappears.Followtheonscreeninstructions.
Then,clickFinishtosaveyourchanges.
11.Enteryourui.comaccountcredentialsandclickEnableCloudAccess.
Note:Forstepbystepinstructions,refertotheUserGuide,whichis
availableatui.com/download/unifi

12.GobacktotheUniFiControllertab(https://unifi.ui.com)inyourbrowserand
waitfortheUniFiControllertobeadopted.
13.ClickLaunchtoopentheUniFiControllerremotely.
TheUniFiControllermanagementinterfacewillappear.Youcanmanageyour
UniFidevicesandviewnetworkstatisticsusingtheUniFiControllermanagement
interface.
ForinformationonconfiguringandusingtheUniFiControllersoftware,refertothe
UserGuidelocatedonourwebsite:ui.com/download/unifi
InstructionsforOtherWebBrowsers
1.EnsurethatyourhostsystemisonthesameLayer2networkastheUniFi
CloudKey.
2.TheUniFiCloudKeyissettoDHCPbydefault,soitwilltrytoautomatically
obtainanIPaddress.AssignaspecificIPaddresstotheUniFiCloudKey,or
checktheDHCPserverforitsIPaddress.
Note:ThedefaultfallbackIPaddressoftheUniFiCloudKeyis
192.168.1.30.
3.Launchthewebbrowser.Intheaddressfield,typehttps://followedbythe
appropriateIPaddress.Pressenter(PC)orreturn(Mac).

4.ClickManagetoruntheUniFiSetupWizard.
Note:YoucanclickConfiguretochangethesettingsoftheUniFiCloud
Key.Thedefaultloginisubnt/ubnt.
5.TheUniFiSetupWizardscreenappears.Followtheonscreeninstructions.
Then,clickFinishtosaveyourchanges.
Note:Forstepbystepinstructions,refertotheUserGuide,whichis
availableatui.com/download/unifi
AftertheUniFiSetupWizardisfinished,theUniFiControllermanagement

AftertheUniFiSetupWizardisfinished,theUniFiControllermanagement
interfacewillappear.LoginwiththeAdminNameandPasswordthatyoucreated,
andthenyoucanmanageyourUniFidevicesandviewnetworkstatisticsusing
theUniFiControllermanagementinterface.
ForinformationonconfiguringandusingtheUniFiControllersoftware,refertothe
UserGuide.
Specifications
UCCK
Dimensions 21.7x43.4x121.9mm
(0.85x1.71x4.80")
Weight 110g(3.88oz)
NetworkingInterface (1)10/100/1000EthernetPort
Buttons (1)ResettoDefaults
Shutdown
PowerMethod
PoE 48V802.3afor
PassivePoE(Pairs4,5+;7,8)
USBC 5V
PowerSupply 802.3afPoEor
USBC5V,Minimum1A
Max.PowerConsumption 5W
OperatingTemperature 0to40°C
(32to104°F)
OperatingHumidity 20to90%Noncondensing
Certifications CE,FCC,IC
SafetyNotices
1.Read,follow,andkeeptheseinstructions.
2.Heedallwarnings.
3.Onlyuseattachments/accessoriesspecifiedbythemanufacturer.
WARNING:Donotusethisproductinlocationthatcanbesubmergedbywater.
WARNING:Avoidusingthisproductduringanelectricalstorm.Theremaybea
remoteriskofelectricshockfromlightning.
ElectricalSafetyInformation
1.Complianceisrequiredwithrespecttovoltage,frequency,andcurrentrequirements
indicatedonthemanufacturer’slabel.Connectiontoadifferentpowersourcethanthose