Ubiquiti UniFi WiFi BaseStation XG User manual

UniFi WiFi BaseStation XG Adjustment Bracket Pole Clamp
Carriage Bolts (Qty. 4) Flange Nuts (Qty. 4) Lag Screws (Qty. 4)
Gigabit PoE (50V, 1.2A) Power Cord
Package Contents
Installation Requirements
13 mm wrench
Category 5 (or above) UTP cable for indoor installations
IMPORTANT: The UWB-XG requires the UniFi Network Application v5.7 or
higher, available at:
ui.com/download/uni
UWB-XG Quick Start Guide

10 GbE
1 GbE
Outdoor Installation Requirements
Shielded Category 5 (or above) cabling should be used for all outdoor wired
Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit: ui.com/toughcable
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Network Application v5.7 or newer (available at: ui.com/download/uni )
Hardware Overview
LED
Ports
The 10 GbE port is a 1/10 Gbps Ethernet port used to connect to the LAN and DHCP
server. It can also be used to connect the power.
Note: The UWB-XG can be powered using an 802.3bt PoE switch or the
included Gigabit PoE adapter. For instructions, see Connecting Power .
UWB-XG Quick Start Guide

Reset
The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used
to connect the power.
The Reset button serves two functions for the UWB-XG:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more
than ve seconds.
VESA Mounting
If you choose to use your own mount, remove the four M4 x 10 screws from the back of
the UWB-XG and detach the pre-installed mount.
Hardware Installation
Pole Mount
UWB-XG Quick Start Guide

1.
2.
UWB-XG Quick Start Guide

3.
4.
UWB-XG Quick Start Guide

5.
6.
7. Proceed to Connecting Ethernet .
Wall Mount
To mount the UWB-XG on a wall or other sturdy at surface, securely attach the
Adjustment Bracket to the wall using the four Lag Screws.
UWB-XG Quick Start Guide

Note: The Adjustment Bracket must attach to a hard surface or other stable
structure.
1.
UWB-XG Quick Start Guide

2.
3.
UWB-XG Quick Start Guide

4.
5.
UWB-XG Quick Start Guide

6.
7.
8. Proceed to Connecting Ethernet .
Connecting Ethernet
Note: If you are using TOUGHCable, we recommend attaching the TOUGHCable
Connector(s) after you insert the cable(s) into the cable gland(s).
The cable gland is comprised of the following components:
UWB-XG Quick Start Guide

1.
2.
3.
4.
5.
6.
UWB-XG Quick Start Guide

7.
8.
9.
10.
11.
12.
UWB-XG Quick Start Guide

13.
14.
15. Repeat steps 1-14 to connect an Ethernet cable to the 1 GbE port if one of the
following conditions applies:
You will use the 1 GbE port for bridging.
You will use the 1 GbE port for 802.3bt PoE.
You will use the included Gigabit PoE adapter to power the UWB-XG.
Note: By default, the UWB-XG is set to 15 dBi for its small-cell gain. To switch to
its large-cell gain of 10 dBi, use the UniFi Network Application.
Connecting Power
IMPORTANT: Using the 10GbE port requires enabling ow control on the
upstream switch port’s conguration for maximum performance.
UWB-XG Quick Start Guide

OR
Specications
UWB-XG
Dimensions
(without Mount)
471.1 x 257.5 x 94.3 mm
(18.55 x 10.14 x 3.713")
Weight
(without Mount)

3.2 kg (7.055 lb)
Networking Interface (1) 10/100/1000 RJ45 Ethernet Port
(1) 1/10 Gbps ICM Ethernet Port
Button Reset
LED RGB, Application-Controllable
Power Method 802.3bt PoE
UWB-XG Quick Start Guide

UWB-XG
Power Supply 50VDC, 1.2A Gigabit PoE
Max. Power Consumption 31W
Supported Voltage Range 44-57VDC
Max. TX Power 25 dBm
MIMO (3) 4 x 4
Operating Frequency 5 GHz
Antenna Integrated Dual-Mode Antenna Array
Antenna Gain 
Small Cell 15 dBi
Large Cell 10 dBi
Antenna Beamwidth 
Small Cell 50°
Large Cell 90°
Wi-Fi Standards 802.11 a/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting VESA-Compatible Mount
Pole/Wall (Brackets Included)
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Weatherproong IP67
Certications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specied by the manufacturer.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote
risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated
on the manufacturer’s label. Connection to a different power source than those specied may
UWB-XG Quick Start Guide

result in improper operation, damage to the equipment or pose a re hazard if the limitations
are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only
by a qualied service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground
wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never
use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certication,
modication or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualied electrician or the manufacturer if there are questions about the
installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide
appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and
regulations.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and,
where applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
Changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operations of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
This radio transmitter (FCC ID: SWX-UAPSTMXG, FCC ID: SWX-M445GL, FCC ID: SWX-M445GH, and
FCC ID: SWX-M11DB) has been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
UWB-XG Quick Start Guide

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
This radio transmitter (IC: 6545A-UAPSTMXG, IC: 6545A-M445GL, IC: 6545A-M445GH, and IC: 6545A-
M11DB) has been approved by ISED Canada.
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential
for harmful interference to co-channel mobile satellite systems.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Le présent émetteur radio (IC: 6545A-UAPSTMXG, IC: 6545A-M445GL, IC: 6545A-M445GH, and IC:
6545A-M11DB) ont été approuvé par ISDE Canada.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une
utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux.
IMPORTANT NOTE
Radiation Exposure Statement
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with minimum distance 24 cm between the
radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
AVIS IMPORTANT
Déclaration sur l’exposition aux rayonnements
Cet équipement est conforme aux limites prévues pour l’exposition aux rayonnements dans un
environnement non contrôlé.
Lors de l’installation et de la mise en fonctionnement de l’équipement, assurez-vous qu’il y ait
une distance minimale de 24 cm entre l’élément rayonnant et vous.
Cet émetteur ne doit être installé à proximité d’aucune autre antenne ni d’aucun autre
émetteur, et ne doit être utilisé conjointement à aucun autre de ces appareils.
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
UWB-XG Quick Start Guide

Brazil
Nota: Este equipamento não tem direito à proteção contra interferência prejudicial e não
pode causar interferência em sistemas devidamente autorizados.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are
applicable to it.
Country List
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
The following apply to products that operate in the 5 GHz frequency range:
Note: This device is restricted to indoor use only when operating in the 5150 - 5350 MHz
frequency range within all member states.
Note: All countries listed may operate at 30 dBm. BFWA member states may operate at 36
dBm.
Note: Operation in the 5.8 GHz frequency band is prohibited in BFWA member states.
Other countries listed may use the 5.8 GHz frequency band.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
UWB-XG Quick Start Guide

© 2023 Ubiquiti Inc. All rights reserved.
UWB-XG Quick Start Guide