Ubiquiti UniFi US-24-250W User manual

US-24-250W Quick Start Guide
For more details, visit: ui.com/toughcable
installation requirements
Package content
•Phillips screwdriver
•Standard size, 19” rack width with a minimum 1U height •For indoor
applications, use Category 5 (or higher) UTP cabling certified for indoor use. •For outdoor
applications, Category 5 (or higher) shielded cabling must be used for all Ethernet connections
and must be connected to the AC ground of the power supply. •We recommend that you protect
your networks from harmful outdoor environments and electrostatic discharge phenomena with
Ubiquiti's industrial grade shielded Ethernet cable.

System Requirements
hardware description
•Linux, Mac OS X or Microsoft Windows 7/8/10
•Java Runtime Environment 1.6 (1.8 or later is recommended)
•Web browser: Mozilla Firefox, Google Chrome, Microsoft Edge or Microsoft Internet
Explorer 11 •UniFi Controller v5.4. xo superior

Panel posterior

hardware installation

ethernet connection

Use SFP ports
For more information on supported fiber SFP modules, visit: community.ubnt.com/unifi

Software installation
Once you have installed the software and run the UniFi Setup Wizard, a login screen for the
UniFi Controller management interface will appear. Enter the administrator name and password
you created and click Sign In.
For information on setting up and using the UniFi Controller software, see the user guide located
on our website: ui.com/download/unifi
Download and install the latest version of the UniFi driver software at ui.com/download/unifi and
follow the instructions on the screen.
You can manage your wireless network and view network statistics through the UniFi Controller's
management interface.
To implement the UniFi Switch, go to the UniFi Switch Implementation section.

Implementing the UniFi Switch 1. From
the UniFi controller panel, click Devices on the bar
2. Locate the UniFi switch in the list of devices in the Model column.
successfully implemented.
Click Adopt.
left of the menu.
To configure PoE settings, go to Configuring PoE Settings section.
3. The UniFi Switch system LED will turn blue to confirm that the

Configuring PoE Settings
1. On the Devices screen, locate the UniFi switch. Click on the switch to access its settings.
2. Click the Ports tab.
3. Click Actions for the port you want to configure.

4. Select the appropriate PoE setting: Off, 24V Passive, or PoE+. Then click Apply.
For more information, please refer to the user guide located on our website: ui.com/download/
unifi

Specifications

safety instructions
electrical safety information
3. This equipment is supplied with a detachable power cord that has an integral safety ground wire designed to be
connected to a safety ground. to. Do not substitute the power cord with one other than the approved type provided.
Never use an adapter plug to connect to a two-wire outlet, as it will break the continuity of the ground wire.
3. Only use the devices or accessories indicated by the manufacturer.
c.
2. This equipment contains no operator-serviceable parts. Only a qualified service technician should provide services.
The indicated AC adapter provides a safety ground. For installation in a building, adequate short-circuit
back-up protection must be provided.
2. Pay attention to all warnings.
b.
If you have any questions about the installation, contact a qualified electrician or the manufacturer
before connecting the equipment.
1. Read, follow and save these instructions.
1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer's
label. Connection to a power source other than those specified may result in malfunction, equipment damage, or fire
hazard if limitations are not followed.
The equipment requires the use of the ground wire as part of the safety certification. Modification or
misuse can create a shock hazard, which could cause serious injury or death.
and. A protective connection must be installed in accordance with national wiring rules and regulations.
d.

Compliance
ui.com/support/warranty
FCC
Mexico (NOM-208-SCFI-2016)
limited warranty
For use in Mexico, operation of this equipment is subject to the following two conditions: 1. this
equipment or device may not cause harmful interference, and 2. this equipment or device must
accept any interference, including interference that may cause unwanted operation.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions.
2.This device must accept any interference received, including interference that may cause
undesired operation.
The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where
appropriate, specifying arbitration instead of jury trials or class actions.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to protect the equipment, to the
extent possible, from harmful interference when it is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
1.This device may not cause harmful interference.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

WEEE Compliance Statement
online resources
Declaration of conformity
CE marked