Ubiquiti UniFi USW-Industral Guide

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 1/11
Un  F  Sw  tch Screws (Qty. 6) Screw Anchors (Qty. 6)
Power Cord
Package Contents
Installat  on Requ  rements
Dr  ll w  th 6 mm dr  ll b  t
Ph  ll  ps screwdr  ver
Cat5/6 UTP cable for  ndoor  nstallat  ons. Plenum-rated cabl  ng for plenum spaces.
System Requ  rements
L  nux, Mac  OS  X, or M  crosoft W  ndows 7/8/10
Java Runt  me Env  ronment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have l  m  ted funct  onal  ty)
Un  F  Controller software v5.10.x (or newer), ava  lable at: u  .com/download/un  f 
Hardware Overv  ew
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 2/11
System LED
PoE LED
L  nk/Speed/Act  v  ty LED
Ports 1 - 8
Flash  ng Wh  te In  t  al  z  ng.
Steady Wh  te Factory defaults, wa  t  ng for adopt  on.
Alternat  ng Wh  te/Blue Dev
 ce  s busy; do not touch or unplug  t. Th  s usually
 nd  cates that a process such as a f  rmware upgrade  s
tak  ng place.
Steady Blue Successfully adopted by a network and work
 ng
properly.
Flash  ng Blue
Th  s  s used to locate a dev  ce.
When you cl  ck Locate  n the Un  F  Controller
software, the System LED w  ll ash blue. The software
w  ll also d  splay the locat  on of the Un  F  Sw  tch on
the  map.
Off PoE D  sabled
Amber 802.3af/at/bt PoE
Off No L  nk
Amber L
 nk Establ  shed at 10 or 100  Mbps
Flash  ng Ind  cates Act  v  ty
Green L
 nk Establ  shed at 1000 Mbps (1 Gbps)
Flash  ng Ind  cates Act  v  ty
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 3/11
Ports 9 - 10
Reset Button
RJ45 ports support 10/100/1000 Ethernet connect  ons and 802.3af/at/bt PoE
output.
RJ45 ports support 10/100/1000 Ethernet connect  ons.
Th  s button serves two funct  ons for the Un  F  Sw  tch:
Restart Press and release the Reset button qu  ckly.
Restore to Factory Default Sett  ngs Press and hold the Reset button for more
than f  ve seconds.
Hardware Installat  on
You have two opt  ons for mount  ng:
Screws and Screw Anchors You can use the  ncluded Screws and Screw Anchors. Go
to "Wall Mount  ng" .
Mach  ne Screws You can use e  ght M4 mach  ne screws (not  ncluded), wh  ch must
be long enough to extend 6 mm  nto the Sw  tch.
Wall Mount  ng
1.
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 4/11
2.
3.
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 5/11
4.
Connect  ng Power
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 6/11
Connect  ng Ethernet
1.
2.
Software Installat  on
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 7/11
Download and  nstall the latest vers  on of the Un  F  Controller software at
u  .com/download/un  f  and follow the on-screen  nstruct  ons.
Note: If you already have Un  F  Controller v5.10.x or newer  nstalled, sk  p to
"Adopt  ng the Un  F  Sw  tch" .
After you have  nstalled the software and run the Un  F  Installat  on W  zard, a log  n
screen w  ll appear for the Un  F  Controller management  nterface. Enter the adm  n
name and password that you created and cl  ck S  gn In.
You can manage your network and v  ew network stat  st  cs us  ng the Un  F  Controller
management  nterface.
To adopt the Un  F  Sw  tch, proceed to "Adopt  ng the Un  F  Sw  tch" .
For  nformat  on on conf  gur  ng and us  ng the Un  F  Controller software, refer to the
User Gu  de on the webs  te: u  .com/download/un  f 
Adopt  ng the Un  F  Sw  tch
1. From the Un  F  Controller dashboard, cl  ck Dev  ces  n the left menu bar.
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 8/11
2. On the Dev  ces screen, locate the Un  F  Sw  tch  n the l  st of dev  ces under the Model
column. To adopt the Un  F  Sw  tch, cl  ck Adopt.
3. The System LED on the Un  F  Sw  tch w  ll turn blue to conf  rm that  t has been
successfully adopted.
Spec  f  cat  ons
USW-Industr  al
D  mens  ons 254 x 235 x 60 mm
(10 x 9.25 x 2.36")
We  ght 3.85 kg (8.49 lb)
Interfaces
Network  ng (8) 10/100/1000 802.3bt PoE RJ45 Ports
(2) 10/100/1000 RJ45 Ports
Management Ethernet In-Band
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 9/11
USW-Industr  al
Power Method 100 - 240 VAC, 50/60 Hz Un  versal Input
Power Supply AC/DC, Internal, 450W DC
Supported Voltage Range AC Input: 100 to 240VAC, Max. 6A
Max. Power Consumpt  on
(Exclud  ng PoE Output) 20W
LEDs
System Status
RJ45 Ports PoE, Speed/L  nk/Act  v  ty
ESD/EMP Protect  on A  r: ± 24 kV, Contact: ± 24 kV
Shock and V  brat  on ETSI300-019-1.4 Standard
Operat  ng Temperature
Internal AC/DC @ 450W -40 to 50° C (-40 to 122° F)
Internal AC/DC @ 240W -40 to 60° C (-40 to 140° F)
Operat  ng Hum  d  ty 5 to 95% Noncondens  ng
Cert  f  cat  ons CE, FCC, IC
Safety Not  ces
1. Read, follow, and keep these  nstruct  ons.
2. Heed all warn  ngs.
3. Only use attachments/accessor  es spec  f  ed by the manufacturer.
WARNING: Fa  lure to prov  de proper vent  lat  on may cause f  re hazard. Keep at least 20
mm of clearance next to the vent  lat  on holes for adequate a  row.
WARNING: To reduce the r  sk of f  re or electr  c shock, do not expose th  s product to ra  n
or mo  sture.
WARNING: Do not use th  s product  n locat  on that can be submerged by water.
WARNING: Avo  d us  ng th  s product dur  ng an electr  cal storm. There may be a remote
r  sk of electr  c shock from l  ghtn  ng.
Electr  cal Safety Informat  on
1. Compl  ance  s requ  red w  th respect to voltage, frequency, and current requ  rements  nd  cated
on the manufacturer’s label. Connect  on to a d  fferent power source than those spec  f  ed may
result  n  mproper operat  on, damage to the equ  pment or pose a f  re hazard  f the l  m  tat  ons
are not followed.
2. There are no operator serv  ceable parts  ns  de th  s equ  pment. Serv  ce should be prov  ded only
by a qual  f  ed serv  ce techn  c  an.
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents

20.12.2019 USW-Industral Quck Start Gude
https://dl.ubnt.com/qsg/USW-Industral/USW-Industral_EN.html 10/11
3. Th  s equ  pment  s prov  ded w  th a detachable power cord wh  ch has an  ntegral safety ground
w  re  ntended for connect  on to a grounded safety outlet.
a. Do not subst  tute the power cord w  th one that  s not the prov  ded approved type. Never
use an adapter plug to connect to a 2-w  re outlet as th  s w  ll defeat the cont  nu  ty of the
ground  ng w  re.
b. The equ  pment requ  res the use of the ground w  re as a part of the safety cert  f  cat  on,
mod  f  cat  on or m  suse can prov  de a shock hazard that can result  n ser  ous  njury or death.
c. Contact a qual  f  ed electr  c  an or the manufacturer  f there are quest  ons about the
 nstallat  on pr  or to connect  ng the equ  pment.
d. Protect  ve earth  ng  s prov  ded by L  sted AC adapter. Bu  ld  ng  nstallat  on shall prov  de
appropr  ate short-c  rcu  t backup protect  on.
e. Protect  ve bond  ng must be  nstalled  n accordance w  th local nat  onal w  r  ng rules and
regulat  ons.
L  m  ted Warranty
u  .com/support/warranty
The l  m  ted warranty requ  res the use of arb  trat  on to resolve d  sputes on an  nd  v  dual bas  s, and,
where appl  cable, spec  fy arb  trat  on  nstead of jury tr  als or class act  ons.
Compl  ance
FCC
Changes or mod  f  cat  ons not expressly approved by the party respons  ble for compl  ance could
vo  d the user’s author  ty to operate the equ  pment.
Th  s dev  ce compl  es w  th Part 15 of the FCC Rules. Operat  on  s subject to the follow  ng two
cond  t  ons.
1. Th  s dev  ce may not cause harmful  nterference, and
2. Th  s dev  ce must accept any  nterference rece  ved,  nclud  ng  nterference that may cause
undes  red operat  on.
Th  s equ  pment has been tested and found to comply w  th the l  m  ts for a Class A d  g  tal dev  ce,
pursuant to Part 15 of the FCC Rules. These l  m  ts are des  gned to prov  de reasonable protect  on
aga  nst harmful  nterference when the equ  pment  s operated  n a commerc  al env  ronment. Th  s
equ  pment generates, uses, and can rad  ate rad  o frequency energy and,  f not  nstalled and used
 n accordance w  th the  nstruct  on manual, may cause harmful  nterference to rad  o
commun  cat  ons. Operat  ons of th  s equ  pment  n a res  dent  al area  s l  kely to cause harmful
 nterference  n wh  ch case the user w  ll be requ  red to correct the  nterference at h  s own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Austral  a and New Zealand
Warn  ng: Th  s equ  pment  s compl  ant w  th Class A of CISPR 32. In a res  dent  al
env  ronment th  s equ  pment may cause rad  o  nterference.
CE Mark  ng
USW-Industr  al Qu  ck Start Gu  de
×
Cl  ck for
Table of Contents