Ubiquiti UniFi USW-Pro-24-POE User manual

UniFi Switch Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord
Rubber Feet (Qty. 4)
Package Contents
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.10.x (or newer), available at: ui.com/download/uni
IMPORTANT: We strongly recommend using UPS backup and power regulation to
prevent equipment damage due to stability issues with local AC power.
Hardware Overview
USW-Pro-24-POE Quick Start Guide

Touchscreen Display
RJ45 PoE LED (Ports 1 - 24)
RJ45 Speed/Link/Activity LED (Ports 1 - 24)
SFP+ Speed/Link/Activity LED (Ports 25 - 26)
Bootup Animation Initializing.
Steady White Factory defaults, waiting for adoption.
Steady Blue Successfully adopted by a network and working properly.
Location Animation This indicates that you clicked Locate in the UniFi Controller software. The software will also display the
location of the device on the map.
Off No PoE
Amber 802.3af/at/bt PoE
Off No Link
Amber Link Established at 10/100 Mbps
Flashing Indicates Activity
Green Link Established at 1000 Mbps
Flashing Indicates Activity
Off No Link
USW-Pro-24-POE Quick Start Guide

RJ45 (Ports 1 - 16)
RJ45 (Ports 17 - 24)
SFP+ (Ports 25 - 26)
Reset Button
USP LED
USP Connect DC Input
Power Port
Green Link Established at 1 Gbps
Flashing Indicates Activity
White Link Established at 10 Gbps
Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output.
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.
Hot-swappable SFP+ ports support 1/10 Gbps connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than ve
seconds.
The LED lights up blue when there is an active power connection on the USP DC input.
This DC input provides redundant power when the UniFi Switch is connected to the UniFi
SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included).
If there is an AC power loss or internal power supply failure, the UniFi Switch will draw
power from the USP-RPS instead.
Connect the included Power Cord to the Power port.
Installation Requirements
Phillips screwdriver
Standard-sized, 19" wide rack with a minimum of 1U height available
For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
For outdoor applications, shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through the AC ground of the power
supply.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
USW-Pro-24-POE Quick Start Guide

more details, visit: ui.com/toughcable
Note: Although the cabling can be located outdoors, the UniFi Switch itself should
be housed inside a protective enclosure.
Hardware Installation
1.
2. 
OR
USW-Pro-24-POE Quick Start Guide

Connecting Power
1.
USW-Pro-24-POE Quick Start Guide

2.
Connecting Ethernet
USW-Pro-24-POE Quick Start Guide

Connecting SFP
1.
2.
3.
USW-Pro-24-POE Quick Start Guide

For information about compatible ber SFP modules, visit:
ubnt.link/UniFi_SFP_DAC_Compatibility
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/uni and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.10.x or newer installed, skip to
“Adopting the UniFi Switch” .
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the admin name and password
that you created and click Sign In.
USW-Pro-24-POE Quick Start Guide

You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to “Adopting the UniFi Switch” .
For information on conguring and using the UniFi Controller software, refer to the User
Guide on the website: ui.com/download/uni
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
2. On the Devices screen, locate the UniFi Switch in the list of devices under the Model
column. To adopt the UniFi Switch, click Adopt.
3. The System LED on the UniFi Switch will turn blue to conrm that it has been successfully
adopted.
Specications
USW-Pro-24-POE
USW-Pro-24-POE Quick Start Guide

USW-Pro-24-POE
Dimensions 442.4 x 285.4 x 43.7 mm
(17.42 x 11.24 x 1.72")
Weight 4.30 kg (9.48 lb)
With Rackmount Brackets 4.39 kg (9.68 lb)
Interfaces
Networking (24) 10/100/1000 RJ45 Ports
(2) 1/10G SFP+ Ethernet Ports
Management Ethernet In-Band
Power Method
Universal Input 100-240VAC/50-60 Hz
USP RPS DC Input 52VDC, 7.69A; 11.5VDC, 2.61A
Power Supply AC/DC, Internal, 450W
Supported Voltage Range 100 to 240VAC
Max. Power Consumption
(Excluding PoE Output) 50W
LEDs
System Status
RJ45 Data Ports PoE; Speed/Link/Activity
SFP+ Data Ports Link/Activity
ESD/EMP Protection Air: ± 16 kV, Contact: ± 12 kV
Shock and Vibration ETSI300-019-1.4 Standard
Operating Temperature -5 to 40° C (23 to 104° F)
Operating Humidity 10 to 90% Noncondensing
Certications CE, FCC, IC
Sound Level*
25% PoE Load, 25° C Room
Temperature 0.9 dBr
50% PoE Load, 25° C Room
Temperature 7.3 dBr
100% PoE Load, 40° C 18.8 dBr
* Background noise level: 27.5 dBa
PoE
PoE Interfaces
Ports 1-16 POE+ IEEE 802.3af/at
(pins 1, 2+; 3, 6-)
Ports 17-24 60W PoE++ IEEE 802.3bt
(Pair A 1, 2+; 3, 6-) (Pair B 4 , 5+; 7, 8-)
Max. PoE Wattage per Port by PSE
802.3at 32W
802.3bt 64W
Voltage Range 802.3af Mode 44-57V
USW-Pro-24-POE Quick Start Guide

PoE
Voltage Range 802.3at/bt Mode 50-57V
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specied by the manufacturer.
WARNING: Failure to provide proper ventilation may cause re hazard. Keep at least 20 mm of
clearance next to the ventilation holes for adequate airow.
WARNING: To reduce the risk of re or electric shock, do not expose this product to rain or
moisture.
WARNING: Do not use this product in location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power source than those specied may result in
improper operation, damage to the equipment or pose a re hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a
qualied service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire
intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an
adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certication, modication
or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualied electrician or the manufacturer if there are questions about the installation prior
to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate
short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
4. The product is used in Service Access Area.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where
applicable, specify arbitration instead of jury trials or class actions.
Compliance
FCC
USW-Pro-24-POE Quick Start Guide

Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operations of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
Australia and New Zealand
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable
to it.
WEEE Compliance Statement
Declaration of Conformity
Online Resources
USW-Pro-24-POE Quick Start Guide

© 2020 Ubiquiti Inc. All rights reserved.
USW-Pro-24-POE Quick Start Guide