Ubiquiti UniFi USW-Industrial User manual

UniFi Switch Screws (Qty. 6) Screw Anchors (Qty. 6)
Power Cord
Package Contents
Installation Requirements
Drill with 6 mm drill bit
Phillips screwdriver
Cat5/6 UTP cable for indoor installations. Plenum-rated cabling for plenum spaces.
System Requirements
Linux, Mac  OS  X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality)
UniFi Controller software v5.10.x (or newer), available at: ui.com/download/unifi
Hardware Overview
USW-Industrial Quick Start Guide

System LED
PoE LED
Link/Speed/Activity LED
Flashing White Initializing.
Steady White Factory defaults, waiting for adoption.
Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is
taking place.
Steady Blue Successfully adopted by a network and working
properly.
Flashing Blue
This is used to locate a device.
When you click Locate in the UniFi Controller software,
the System LED will flash blue. The software will also
display the location of the UniFi Switch on the  map.
Off PoE Disabled
Amber 802.3af/at/bt PoE
Off No Link
Amber Link Established at 10 or 100
 Mbps
Flashing Indicates Activity
Green Link Established at 1000 Mbps (1 Gbps)
USW-Industrial Quick Start Guide

Ports 1 - 8
Ports 9 - 10
Reset Button
Green Flashing Indicates Activity
RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at/bt PoE output.
RJ45 ports support 10/100/1000 Ethernet connections.
This button serves two functions for the UniFi Switch:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
Hardware Installation
You have two options for mounting:
Screws and Screw Anchors You can use the included Screws and Screw Anchors. Go to
"Wall Mounting" .
Machine Screws You can use eight M4 machine screws (not included), which must be
long enough to extend 6 mm into the Switch.
USW-Industrial Quick Start Guide

Wall Mounting
1.
USW-Industrial Quick Start Guide

2.
USW-Industrial Quick Start Guide

3.
USW-Industrial Quick Start Guide

4.
USW-Industrial Quick Start Guide

Connecting Power
Connecting Ethernet
1.
USW-Industrial Quick Start Guide

2.
Software Installation
Download and install the latest version of the UniFi Controller software at
ui.com/download/unifi and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.10.x or newer installed, skip to
"Adopting the UniFi Switch" .
After you have installed the software and run the UniFi Installation Wizard, a login screen
will appear for the UniFi Controller management interface. Enter the admin name and
password that you created and click Sign In.
USW-Industrial Quick Start Guide

You can manage your network and view network statistics using the UniFi Controller
management interface.
To adopt the UniFi Switch, proceed to "Adopting the UniFi Switch" .
For information on configuring and using the UniFi Controller software, refer to the User
Guide on the website: ui.com/download/unifi
Adopting the UniFi Switch
1. From the UniFi Controller dashboard, click Devices in the left menu bar.
USW-Industrial Quick Start Guide