Uclear Commander User manual

Commander
Bluetooth Headset
User Manual

Contents
Contents ------------------------------------------------------------------ 2
Package Contents ---------------------------------------------------- 3
Getting started --------------------------------------------------------- 4
Introduction -------------------------------------------------------- 4
Charging the battery ------------------------------------------- 4
Low battery indication ----------------------------------------- 4
Installing the in-car visor bracket ----------------------------5
Installing the in-car multi-function charging cradle --- 5
Powering on the headset--------------------------------------- 5
Powering off the headset -------------------------------------- 6
Pairing the headset with your phone -----------------------6
Making calls over Bluetooth----------------------------------- 7
Android OS ------------------------------------------------------- 7
Activating voice speed dial APP ---------------------------- 7
iOS-------------------------------------------------------------------- 8
Answering incoming calls ------------------------------------- 8
Ending a call ------------------------------------------------------8
Call waiting and switching between calls--------------- 9
Listening to music via the headset------------------------- 9
Advanced product features--------------------------------- 10
Pairing with two mobile phones simultaneously-------- 10
Specifications ----------------------------------------------------11
Limitations of warranty ---------------------------------------- 11
Correct Disposal of this Product -------------------------- 11
Waiver and Disclaimer ---------------------------------------- 12
Product information--------------------------------------------- 13
Charging Notice ------------------------------------------------
13
Personal Safety ------------------------------------------------------ 14
Notices ------------------------------------------------------------------11
Contents
2

Welcome to your UCLEAR Commander
Package Contents
Commander
Bluetooth headset In-car visor bracket
12 volts USB car charger USB charging cable User Manual
Ear Plugs (S, M, L) Lanyard Ear hook 3
Thank you for purchasing the UCLEAR Commander Bluetooth headset.
The UCLEAR Commander is a Bluetooth headset designed exclusively
for car drivers over the world. It unites the UCLEAR’s own “One-Touch-
Dail” Bluetooth voice speed dial and quick-connect features to allow
hands-free dialling with accuracy up to 99.5%. With the UCLEAR
Commander, you will be able to stay connected while focussing on
the conditions on the road and driving with both hands unhindered.
In-car multi-function
charging cradle

Getting started
Introduction to your UCLEAR Commander
Multi-function button:
Power On/Off
Answer calls
LED light
Volume up
Volume down
• To charge the UCLEAR Commander, use the charging cable provided
to connect to your computer USB port or the 12 volts USB car charger.
• When the UCLEAR Commander is charging, the LED light will glow red.
• When the UCLEAR Commander has finished charging, the LED light will
glow blue.
Charging the battery
• The UCLEAR Commander’s LED light will blink red when the battery is
low.
Low battery indication
4

Getting started
Installing the in-car visor bracket
Step 1 Step 2 Step 3 Step 5
Step 4
• Position and fasten the in-car visor bracket onto the visor.
• Install the headset onto the in-car visor bracket.
• Adjust the positioning of the headset and the in-car visor bracket.
Installing the in-car multi-function charging cradle
* Remarks: You can choose whether to install the in-car visor bracket
and in-car multi-function charging cradle as per your preference.
Powering on the headset
5
• Identify a position to adhere the charging cradle
• Peel off the double sided tape protective film.
• Carefully place the charging cradle onto the identified position.
• Apply slight pressure onto the charging cradle to ensure that the
charging cradle is firmly secured.
• The headset will power on automatically when it is removed from
the visor bracket or charging cradle.
• Press and hold the multifunction button for 2 seconds to power on
the headset if it is not in the visor bracket or charging cradle.

Getting started
Powering off the headset
Pairing the headset with your phone
6
• The headset will automatically power off when returned to the visor
bracket or charging cradle.
• Press and hold the multi-function button for 5 seconds to power it off.
Please pair the UCLEAR Commander Bluetooth headset with your mobile
phone first in order to use the headset. The headset will automatically
connect to your phone each time after they have been paired.
• Press and hold the multi-function button for 2 seconds to power on the
headset, then press and hold the “+” and “-” button for 5 seconds in
order to enter pairing mode. The LED light will blink red and blue to
indicate that you have successfully entered into pairing mode.
• Enable Bluetooth on your mobile phone and search for Bluetooth
devices. Select “UCLEAR Commander” from the list of devices.
• If your mobile phone prompts you to enter a password, use “0000”.
Most mobile phones will automatically connect to the phone and music
features after pairing is complete.
After pairing your UCLEAR Commander Bluetooth headset to your mobile
phone, you may now use the headset to answer incoming calls or make
outgoing calls or listen to music.

Getting started
• Directly dial from your mobile phone.
Making calls over Bluetooth
Using your mobile phone
Android OS
Installing UCLEAR Commander APP
Recording voice tags of your contacts
7
Using “One-Touch-Dial” voice speed dial
With UCLEAR’s own “One-Touch-Dial” Bluetooth voice speed dial function,
users can make calls with their own voice by pressing the multi-function
button. Accuracy can be up to 99.5%. Users can be able to stay
connected while focussing on the conditions on the road and driving
with both hands unhindered.
• Download UCLEAR Commander’s APP from Google Play and install it
into your mobile phone.
• After installation of the APP, its icon will appear on your mobile
phone’s Homepage.
• Activate the UCLEAR Commander APP on your mobile phone.
• Click the “Settings” button and enter the “Contacts” interface, select
the contact number and tap “Record voice tag” from the menu.
After you hear the beep tone, say the contact’s name to create the
voice tags and repeat to do so for other contact numbers.

Activating voice speed dial APP
Getting started
Remarks: The Commander Bluetooth headset must be linked with the
mobile phone before using the UCLEAR Commander APP.
Answering incoming calls
• End a call on the mobile phone.
• Press the multi-function button to end a call.
iOS
• Removing the headset from the visor bracket or the charging
cradle will automatically answer an incoming call.
• When the headset is not in the visor bracket or charging cradle:
If the headset is powered off, press and hold the multi-function
button for two sections to answer the call. If the headset is powered
on, click the multi-function button to answer the call.
Ending a call
8
• Press multi-function button on your UCLEAR Commander Bluetooth
headset, and the UCLEAR Commander APP will be automatically
activated. After you hear the beep tone, call the contact name
you wish to call as per the corresponding recorded voice tag, then
your call will be initiated.
Press the multi-function button on your UCLEAR Commander Bluetooth
headset, and it will automatically activate the built-in “voice
recognition APP” or “Siri” in iPhone. Call the name of a contact in your
contact book that you wish to call (e.g. David) and your call will
be initiated.

Getting started
Call waiting and switching between calls
Increase the volume
Decrease the volume
Listening to music via the headset
Playing music
Skip to the next song
Go back to the previous song
• Press the “+” button.
• Press the “-“ button.
• Press and hold the “+” button for 2 seconds.
• Press and hold the “-” button for 2 seconds.
9
• When you are on a call and receive another incoming call, press
the multi-function button to put the first call on hold and answer the
new call. Press the multifunction button again to switch between the
two calls.
• To end an active call while another is still on hold, quickly press the
multi-function button twice.
• If your mobile phone supports A2DP/AVRCP Bluetooth Profile, you
can play music directly to the headset and control the mobile
phone from the UCLEAR Commander Bluetooth headset.
• To start playing music, please activate the music player in your
mobile phone and start playing music. To stop playing the music,
please select “pause” in your mobile phone.

Getting started
Increase the volume
Advanced product features
Decrease the volume
Pairing with two mobile phones simultaneously
1. Press and hold the multi-function button for 2 seconds to power on the
headset, then press and hold the “+” and “-“ buttons for 5 seconds in
order to enter pairing mode. The LED light will blink red and blue to
indicate that you have successfully entered into pairing mode.
2. Enable Bluetooth on your mobile phones and search for Bluetooth
devices. Select “UCLEAR Commander” from the list of devices.
3. If your mobile phone prompts you to enter a password, use “0000”.
4. After the pairing is successful, disable Bluetooth on your mobile phone
and press and hold the multi-function button for 5 seconds to power
off the headset.
5. Repeat steps 1-3 with your second mobile phone to pair it with the
headset.
6. Enable Bluetooth on your first phone and re-connect to the headset.
You can now connect the Commander headset with both mobile
phones.
• Press the “-” button.
• Press the “+” button.
10
• Digital signal processing (DSP) to reduce noise and echo to ensure
clear conversation.
• Long standby time, works with in-car headset bracket can support
30days daily life use.
• Multi-point connection, can pair and use with two devices
simultaneously.

Notices
LIMITATIONS OF WARRANTY:
All product warranties for the product by are limited
to those mentioned in the product manual.
CORRECT DISPOSAL OF THIS PRODUCT:
Do not dispose this product with other household wastes at the
end of its working life. There is a separate collection system for
used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Household users should contact either the retailer where they
purchased this product, or their local government office, for
details of where and how they can take this item for
environmentally safe recycling. Business users should contact
their suppliers and refer to the terms and conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
Bluetooth Class 2 V3.0
Profiles HSP(V1.6), HFP(V1.2), A2DP(V1.2)
Coverage 10 Meters
Talk Time 3.5 Hours
Standby Time 30 Days
Charging Time 1 Hour
Operating Temperature -20℃– 60℃
Specifications
11

WAIVER AND DISCLAIMER:
UCLEAR Electronics Limited and all their representatives, agents,
distributors, suppliers and resellers shall not be liable and will be
held harmless from any and all litigation, claims, debts, demands,
actions and liability which may arise, directly or indirectly, from
operating or using the product for any damages, losses, distress,
pain, suffering, discomfort, loss and injuries including bodily harm
illness, strains, fractures, partial and/or total paralysis, death or other
ailments that could cause serious disability either to any persons, or
any parties whether the user or other third parties or their possessions,
or to any goods, vehicles, properties, assets among others including
your own suffered by any persons, organizations, or any third parties
whether physical or otherwise and which may accrue to you in the
future, to the fullest extent permitted by law as a result of the use,
operation, malfunctioning, misuse, disposal or repairsof the product
or any other reasons, conditions or circumstances or attempts to do
so whether due negligence, omissions or otherwise of UCLEAR
Electronics Limited or any of their representatives, partners, agents,
distributors, suppliers, resellers, designer, manufacturer or any others
in its supply and distribution chain or any third parties involved.
Notices
12

PRODUCT INFORMATION:
UCLEAR Electronics Limited and all their representatives, agents,
distributors, suppliers or resellers shall not be held responsible for
any consequences arising from any errors or omissions in the guide
or resulting directly or indirectly from the use of the information
herein. UCLEAR Electronics Limited reserves the right to amend or
improve the product design or user guide without any restrictions
and without any obligation to notify users.
All information here is accurate as of the date of printing. Please
check for the latest version of any the modified or upgraded
product on the website www.uclear.com from time to time.
Notices
CHARGING NOTICE:
To reduce the risk of personal injury, electrical shock, fire or
damage to equipments, please follow all the instructions below:
- Do not immerse the product, AC adaptor or speakers in water.
- Do not install, place or use the product near any source of heat
for example: stove, radiator, oven, toaster, coffee maker or
other apparatus that gives off heat.
- Always use the provided AC power adaptor and cable included
in the package to charge the product. Use of any incorrect
power supply to charge the product may cause permanent
damage to the product and render the warranty void.
13

Notices
PERSONAL SAFETY:
Do not open the seal of the hardware, tamper, repair or modify
any parts. Do not touch the product with metal objects or parts
or chemical products. Violation of the above will lead to
potential fire hazards and mishaps.
Please contact the technical support or your local supplier if
your product malfunctions.
Always comply with the local law and traffic regulations. Where
use of the product is not permitted or allowed by any laws and
regulations including the traffic laws of your country, we warn
you not to go against such restrictions. You will bear the full
responsibilities of any breaches of law and regulations.
We warn you of the inherent, unforeseeable and unlimited risks
and dangers in using the product while in traffic, including injury
or illness, strains, fractures, partial and/or total paralysis, death
or other ailments that could cause serious disability due to any
causes.
This product is only for use by persons eighteen (18) years of
age and above who have understood the warnings, risks and
the terms of use.
You confirm that you have read this release of liability and fully
understand its terms and that you have given up substantial
rights by using or attempting to use the product.
14

TECHNICAL SUPPORT:
For additional information please visit our website at
www.uclear.com
COPYRIGHTS:
Copyright ©2013 UCLEAR Electronics Limited. All rights reserved.
No part of this guide may be reproduced in any form or by any
process whatsoever without prior written consent from UCLEAR
Electronics Limited.
LICENCES:
The trademark and logo is owned by UCLEAR Electronics
Limited. Any use of the mark by any other parties without prior
written permission of UCLEAR Electronics Limited constitutes an
infringement of legal rights. The Bluetooth trademark is owned
by Bluetooth SIG and is used under license by UCLEAR Electronics
Limited.