UIS NGW-230 User manual

UIS

InstallationInstructions
NGW‐230
WirelessGateway

































Contents
1. Product Features
2. Package Contents
3. Components and Description
4. Install this product









































1,2
1
43
2
1. Product Features
External wired ADSL Internet
Internally wired / wireless LAN Wifi network control
functions and Sensors
2. Package Contents
Wireless Gateway Host-----x1
Power Supply--------------x1
Instructions--------------x1
3. Components and Description
Front
#Item Directions
1 Function
indicator
Connection and function indication。
2 Setting
key
Setting pairing
Back
#Item Directions
1 Power
supply
Connect the dedicated AC power supply of
the slot

slot
2 LAN slot Connected to a computer or HUB, identify
mechanisms to support 100Mbps / 10Mbps
automatic switching。
3 WAN slot ADSL modem connection or existing
network。
4 USB slot USB 2.0 slot
4.Install this product

1 Select Install the appropriate location such as the installation
guidelines。
2 Plug in the power transformer, either insert the wireless host
side into the wall。
3After plugging in the power function indicator flashes red, wait about 40
seconds that is the boot to complete。
4 The basic setting of this product
Open your web browser。
Enter in the URL http://192.168.19.254 Press Enter。
Enter the network password dialog box appears, enter "123" in
the Password field inside, click on "LOGIN"
That will open the product's basic settings screen. Detailed
instructions, please refer to the System Installation Manual。

5Press the key to the front of the set and each sensor pair。

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)
thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.

Notice:Thechangesormodificationsnotexpresslyapprovedbytheparty
responsibleforcompliancecouldvoidtheuser’sauthoritytooperatetheequipment.

IMPORTANTNOTE:TocomplywiththeFCCRFexposurecompliancerequirements,
nochangetotheantennaorthedeviceispermitted.Anychangetotheantennaor
thedevicecouldresultinthedeviceexceedingtheRFexposurerequirementsand
voiduser’sauthoritytooperatethedevice.
FCCINFORMATION
TheFederalCommunicationCommissionRadioFrequencyInterference
Statementincludesthefollowingparagraph:

TheequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass
BDigitalDevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidential
installation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergy
and,ifnotinstalledandusedinaccordancewiththeinstruction,maycauseharmful
interferencetoradiocommunication.However,thereisnogranteethat
interferencewillnotoccurinaparticularinstallation.Ifthisequipmentdosecause
harmfulinterferencetoradioortelevisionreception,whichcanbedeterminedby
turningtheequipmentoffandon,theuserisencouragedtotrytocorrectthe
interferencebyoneormoreofthefollowingmeasures:

‐‐Reorientorrelocatethereceivingantenna.
‐‐Increasetheseparationbetweentheequipmentandreceiver.
‐‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
‐‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Theusershouldnotmodifyorchangethisequipmentwithoutwrittenapprovalfrom
UnitedIntegratedServicesCO.,LTD.Modificationcouldvoidauthoritytousethis
equipment.