Ultima Displays Tornado User manual

Tor ado
The Tornado is an ideal counter for outdoor promotional
use, with a hollow moulded top and base making it very
light and easy to transport. The top includes a pen
recess and water drainage notches. The base can be
filled with water or sand for added weight and stability,
making it suitable for all weather conditions.
features & be efits
•Suitable for indoor or outdoor use
•Constructed from moulded NDPE and PVC
tambour
•oulded top has a pen recess and water
drainage notches
•Weatherproof, robust and durable
•Hollow base for water or sand weighting
•Plain white PVC tambour wrap included
•Header & support poles are an extra cost option
Assembled dimensions (mm)
1040 (h) x 850 (w) x 500 (d) approx.
PVC wrap actual dimensions (mm):
900 (h) x 2070 (w) (+/- 5mm)
Header assembled dimensions (mm):
250 (h) x 600 (w) approx.
Weight:
11.5kg approx
Water capacity
Each base holds 25 Litres
Please refer to Graphic template Included in kit:
Base, top, 4 x screws, 4 x poles,
PVC tambour wrap
Printing:
PVC wrap can be printed directly
onto using flat bed printers.
hardware specifications graphic specifications additional info
REV 7 05.11
Either Open knee hole or full wrap configurations
can be acheived with the same components.
We are continually improving and modifying our product range and reserve the right to vary the specifications without
prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE.
NB - Header & poles
are an optional extra
Oveall height with header
2060mm approx.

Kit includes: 4 x poles, 4 x screws, 1 x top,
1 x base, 1 x PVC tambour wrap.
Take the base with the plug
hole and fill with water or sand
weighting agent.Importa t:
make sure the ridge of the
bung is on the outside
Screw fasten male pole onto female pole.
Repeat for remaining poles.
Assembly I structio s
1 2
Repeat step 3 for the other pole
and then place the base on the
floor.
Take the tambour wrap and
insert the bottom edge into the
grooved guide on the base.
Ensure the tambour is fitting
securely into the groove.
The end of the tambour wrap
can slot into groove Afor a
knee hole open style counter or
groove Bfor full wrap style
counter.
Fit pole assembly through hole
in the base and push one of the
screws through from the
opposite side. Ensure the pole
and screw are securely
fastened together.
A
B
AB
Take the top and align the holes
over the poles.
7
Slot the screw through the top
into the pole and secure.
8
3 4 5 6
Cou ter assembly
Kneehole style counter Full wrap style counter