Ultimate Support IQ Series User manual

2. Holding the extracted Memory Lock knob with right
hand, pivot the “X” brace with left hand to desired height
and release knob. Be sure the Memory Lock is fully and
securely engaged before placing keyboard on stand.
IQ-X-100 0
IQ-X-2000
IQ-X-3000
800.525.5628 . www.ultimatesupport.com
Copyright 2020, Ultimate Support Systems . All Rights Reserved
Arms and legs feature
adjustable leveling end
caps. Turn the leveling end
caps as needed to adjust
for uneven surfaces.
1. With the Memory Lock facing you, hold top left tube with
left hand and with your right hand pull the Memory Lock
knob toward you. Being sure to fully retract the pin from
the Memory Lock plate.
Memory
Lock Knob
NOTE: Your IQ-X-1000, IQ-X-2000 and IQ-X-3000 will open to this
height every time you use it unless a new height is desired.
FEATURES
IQ-X-3000, IQ-X-2000 & IQ-X-1000
Manual
Visit ultimatesupport.com
to download a detailed
product manual, read full
warranty details and to
register for warranty.

ASSEMBLING STAND
IQ-X-3000, IQ-X-2000 & IQ-X-1000
3 3
33
4 4
44
1
1
1 1
22
2 2
ATTACHING FEET
(FIRST)
Make sure that the feet are
placed on the bottom of the
stand. The bottom is below
center bolt.
Place feet on by lining up
matching numbers. Make
sure the long end of each
foot is facing front.
Attach provided screws
& washers. Screws
attach from the outside.
ATTACHING ARMS
(SECOND)
Make sure that the Arms
are placed on the top of
the stand. The top is above
adjustment knob.
Place arms on by lining up
matching numbers. Make
sure the long end of arms
is facing front.
Attach use provided screws
and washers. Screws attach
from the outside.
LONG END OF FOOT
LONG END OF ARM
ADJUSTMENT KNOB
CENTER BOLT
TOP
BOTTOM
FRONT
SCREW SCREW
WASHER WASHER
BACK