Ultimate Support APEX Series User manual

APEX
SERIES
KEYBOARD STAND
Product Manual
for Ultimate Support
AX-48 PRO B
ITEM #17351
AX-48 PRO S
ITEM #17476
44
Rev. 1, 12.08.11 | Manual Item #AX-48-PRO-M
800.525.5628 . www.ultimatesupport.com . Copyright 2011, Ultimate Support Systems . All Rights Reserved
warranty registration
Visit www.ultimatesupport.com for a quick and convenient process for registering your new
Ultimate Support product. Warranty Registration and Proof of Purchase are required for warranty
fulfilment. Full Limited Lifetime Warranty and Ultimate Protection Plus Premium Service and
Support Plan details are available online under Music Gear & Instrument Stands / Customer Support.
AX-48 Pro B
AX-48 Pro S

SETUP FOR APEX-4 8 PRO (Continued) HANDLE AT TACHMENT
1. Remove included
screws from handle
mount (in stand).
2. Position handle in
place by lining up holes
in handle and holes in
handle mount.
3. Secure handle in
place with screws.
32
Congratulations
on your purchase!
4. Position clamp on column face and install bracket and T-screw.
(Angular edge rides in column slot.)
3. Stand AX-48 Pro upright and pen top cap to remove Tribars.
5. Attach Tribars to clamps by Tribar hook. Gently push Tribar
down into slot.
6. Loosen thumbscrew and slide stabilizer to touch the floor.
Re-tighten the thumbscrew.
7. To accommodate larger, heavier keyboard and / or lower playing
styles, remove angle adapter and re-adjust stabilizer. This
changes column angle and shifts center of gravity.
8. After loading top instrument first, secure cables in cable clips.
Rotate cable clips. NOTE: Rotate cable clips again for
re-positioning.
Updated Design – The AX-48
Pro delivers everything you
loved about the original APEX
stand, but now features a sleek
exterior design for the modern
keyboard player.
Longer Tri-bar Arms – In
addition to one set of 13-inch
Tri-bar arms, the AX-48 Pro
now includes a set of 18-inch
Tri-bar arms to support your
larger keyboards.
True Portability – Take the
AX-48 Pro anywhere. The
Tri-bar arms store in the
column top and the legs slide
into the bottom creating a
self-contained, compact unit
complete with a heavy-duty
carrying handle.
Stable & Durable – Just like
the original APEX, the AX-48
Pro features locking legs for
proven stability and a black or
silver anodized aluminum finish
that won’t rust and resists
scratches.
1
4
5
SETUP FOR APEX-4 8 PRO
1. Lay stand on the floor. Press
the buttons at the base of the
column and slide legs out.
2. Rotate legs until they snap
into place.
1
2
2
3
3
6
7
8